lkml.org 
[lkml]   [2006]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.6.19-rc2-mm1 // errors in verify_redzone_free()
    Date
    Hello,

    Multiple of verif were found with 2.6.19-rc2-mm1 kernel:

    slab error in verify_redzone_free(): cache `size-32': memory outside object
    was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f4e410>] 0xb7f4e410
    =======================
    dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object
    was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f4e410>] 0xb7f4e410

    Full dmesg and config attached. System info:

    Linux orion 2.6.19-rc2 #3 PREEMPT Thu Oct 19 16:04:17 CEST 2006 i686 Intel(R)
    Pentium(R) 4 CPU 2.40GHz GNU/Linux

    Gnu C 4.1.1
    Gnu make 3.81
    binutils 2.16.1
    util-linux 2.12r
    mount 2.12r
    module-init-tools 3.2.2
    e2fsprogs 1.39
    pcmcia-cs 3.2.8
    nfs-utils 1.0.6
    Linux C Library > libc.2.4
    Dynamic linker (ldd) 2.4
    Procps 3.2.6
    Net-tools 1.60
    Kbd 1.12
    Sh-utils 5.94
    udev 087
    Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
    yenta_socket rsrc_nonstatic pcmcia_core

    Regards,

    Mariusz Kozlowski
    Linux version 2.6.19-rc2 (root@orion) (gcc version 4.1.1 (Gentoo 4.1.1)) #3 PREEMPT Thu Oct 19 16:04:17 CEST 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001df70000 (usable)
    BIOS-e820: 000000001df70000 - 000000001df7c000 (ACPI data)
    BIOS-e820: 000000001df7c000 - 000000001df80000 (ACPI NVS)
    BIOS-e820: 000000001df80000 - 000000001e000000 (reserved)
    BIOS-e820: 000000002df80000 - 000000002e000000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    479MB LOWMEM available.
    Entering add_active_range(0, 0, 122736) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 122736
    early_node_map[1] active PFN ranges
    0: 0 -> 122736
    On node 0 totalpages: 122736
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 926 pages used for memmap
    Normal zone: 117714 pages, LIFO batch:31
    DMI present.
    ACPI: RSDP (v000 PTLTD ) @ 0x000f6fe0
    ACPI: RSDT (v001 SONY K7 0x06040000 LTP 0x00000000) @ 0x1df774d1
    ACPI: FADT (v001 SONY K7 0x06040000 PTL 0x000f4240) @ 0x1df7bf64
    ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1df7bfd8
    ACPI: DSDT (v001 SONY K7 0x06040000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x8008
    Allocating PCI resources starting at 30000000 (gap: 2e000000:d1f80000)
    Detected 2392.397 MHz processor.
    Built 1 zonelists. Total pages: 121778
    Kernel command line: root=/dev/hda3 vga=0x318 video=vesafb:mtrr
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Console: colour dummy device 80x25
    ------------------------
    | Locking API testsuite:
    ----------------------------------------------------------------------------
    | spin |wlock |rlock |mutex | wsem | rsem |
    --------------------------------------------------------------------------
    A-A deadlock:failed|failed| ok |failed|failed|failed|
    A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
    A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
    A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
    A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
    A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
    A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
    double unlock: ok | ok |failed| ok |failed|failed|
    initialize held:failed|failed|failed|failed|failed|failed|
    bad unlock order: ok | ok | ok | ok | ok | ok |
    --------------------------------------------------------------------------
    recursive read-lock: | ok | |failed|
    recursive read-lock #2: | ok | |failed|
    mixed read-write-lock: |failed| |failed|
    mixed write-read-lock: |failed| |failed|
    --------------------------------------------------------------------------
    hard-irqs-on + irq-safe-A/12:failed|failed| ok |
    soft-irqs-on + irq-safe-A/12:failed|failed| ok |
    hard-irqs-on + irq-safe-A/21:failed|failed| ok |
    soft-irqs-on + irq-safe-A/21:failed|failed| ok |
    sirq-safe-A => hirqs-on/12:failed|failed| ok |
    sirq-safe-A => hirqs-on/21:failed|failed| ok |
    hard-safe-A + irqs-on/12:failed|failed| ok |
    soft-safe-A + irqs-on/12:failed|failed| ok |
    hard-safe-A + irqs-on/21:failed|failed| ok |
    soft-safe-A + irqs-on/21:failed|failed| ok |
    hard-safe-A + unsafe-B #1/123:failed|failed| ok |
    soft-safe-A + unsafe-B #1/123:failed|failed| ok |
    hard-safe-A + unsafe-B #1/132:failed|failed| ok |
    soft-safe-A + unsafe-B #1/132:failed|failed| ok |
    hard-safe-A + unsafe-B #1/213:failed|failed| ok |
    soft-safe-A + unsafe-B #1/213:failed|failed| ok |
    hard-safe-A + unsafe-B #1/231:failed|failed| ok |
    soft-safe-A + unsafe-B #1/231:failed|failed| ok |
    hard-safe-A + unsafe-B #1/312:failed|failed| ok |
    soft-safe-A + unsafe-B #1/312:failed|failed| ok |
    hard-safe-A + unsafe-B #1/321:failed|failed| ok |
    soft-safe-A + unsafe-B #1/321:failed|failed| ok |
    hard-safe-A + unsafe-B #2/123:failed|failed| ok |
    soft-safe-A + unsafe-B #2/123:failed|failed| ok |
    hard-safe-A + unsafe-B #2/132:failed|failed| ok |
    soft-safe-A + unsafe-B #2/132:failed|failed| ok |
    hard-safe-A + unsafe-B #2/213:failed|failed| ok |
    soft-safe-A + unsafe-B #2/213:failed|failed| ok |
    hard-safe-A + unsafe-B #2/231:failed|failed| ok |
    soft-safe-A + unsafe-B #2/231:failed|failed| ok |
    hard-safe-A + unsafe-B #2/312:failed|failed| ok |
    soft-safe-A + unsafe-B #2/312:failed|failed| ok |
    hard-safe-A + unsafe-B #2/321:failed|failed| ok |
    soft-safe-A + unsafe-B #2/321:failed|failed| ok |
    hard-irq lock-inversion/123:failed|failed| ok |
    soft-irq lock-inversion/123:failed|failed| ok |
    hard-irq lock-inversion/132:failed|failed| ok |
    soft-irq lock-inversion/132:failed|failed| ok |
    hard-irq lock-inversion/213:failed|failed| ok |
    soft-irq lock-inversion/213:failed|failed| ok |
    hard-irq lock-inversion/231:failed|failed| ok |
    soft-irq lock-inversion/231:failed|failed| ok |
    hard-irq lock-inversion/312:failed|failed| ok |
    soft-irq lock-inversion/312:failed|failed| ok |
    hard-irq lock-inversion/321:failed|failed| ok |
    soft-irq lock-inversion/321:failed|failed| ok |
    hard-irq read-recursion/123: ok |
    soft-irq read-recursion/123: ok |
    hard-irq read-recursion/132: ok |
    soft-irq read-recursion/132: ok |
    hard-irq read-recursion/213: ok |
    soft-irq read-recursion/213: ok |
    hard-irq read-recursion/231: ok |
    soft-irq read-recursion/231: ok |
    hard-irq read-recursion/312: ok |
    soft-irq read-recursion/312: ok |
    hard-irq read-recursion/321: ok |
    soft-irq read-recursion/321: ok |
    --------------------------------------------------------
    142 out of 218 testcases failed, as expected. |
    ----------------------------------------------------
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 481312k/490944k available (2923k kernel code, 9088k reserved, 964k data, 184k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffff8000 - 0xfffff000 ( 28 kB)
    vmalloc : 0xde800000 - 0xffff6000 ( 535 MB)
    lowmem : 0xc0000000 - 0xddf70000 ( 479 MB)
    .init : 0xc0536000 - 0xc0564000 ( 184 kB)
    .data : 0xc03dadba - 0xc04cc00c ( 964 kB)
    .text : 0xc0100000 - 0xc03dadba (2923 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4786.48 BogoMIPS (lpj=2393240)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00004400 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    Compat vDSO mapped to ffffe000.
    CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20060707
    ACPI: setting ELCR to 0200 (from 0c00)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 8000-803f claimed by ali7101 ACPI
    PCI quirk: region 8040-805f claimed by ali7101 SMB
    Boot video device is 0000:01:05.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11)
    ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11
    ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) *0, disabled.
    ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    pnp: 00:05: ioport range 0x40b-0x40b has been reserved
    pnp: 00:05: ioport range 0x480-0x48f has been reserved
    pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:05: ioport range 0x4d6-0x4d6 has been reserved
    pnp: 00:05: ioport range 0x8000-0x807f could not be reserved
    ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[f0404000-f04047ff] Max Packet=[2048] IR/IT contexts=[4/4]
    PCI: Bridge: 0000:00:01.0
    IO window: a000-afff
    MEM window: f0500000-f05fffff
    PREFETCH window: f8000000-fbffffff
    PCI: Bus 2, cardbus bridge: 0000:00:0a.0
    IO window: 00001000-000010ff
    IO window: 00001400-000014ff
    PREFETCH window: 30000000-31ffffff
    MEM window: 32000000-33ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:0a.1
    IO window: 00001800-000018ff
    IO window: 00001c00-00001cff
    PREFETCH window: 34000000-35ffffff
    MEM window: 36000000-37ffffff
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
    TCP: Hash tables configured (established 16384 bind 8192)
    TCP reno registered
    Simple Boot Flag at 0x35 set to 0x1
    Machine check exception polling timer started.
    Initializing RT-Tester: OK
    audit: initializing netlink socket (disabled)
    audit(1161275627.516:1): initialized
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.27 [Flags: R/W].
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Activating ISA DMA hang workarounds.
    vesafb: framebuffer at 0xf8000000, mapped to 0xde880000, using 4608k, total 32704k
    vesafb: mode is 1024x768x24, linelength=3072, pages=13
    vesafb: protected mode interface info at c000:51eb
    vesafb: pmi: set display start = c00c527f, set palette = c00c52cb
    vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2 a0b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    ACPI: AC Adapter [ACAD] (on-line)
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PBTN]
    ACPI: Lid Switch [LID]
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    Using specific hotkey driver
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [TZ01] (50 C)
    lp: driver loaded but no devices found
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected Ati IGP345M chipset
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.0.1 20051102
    ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized radeon 1.25.0 20060524 on minor 0
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
    lp0: using parport0 (interrupt-driven).
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ALI15X3: IDE controller at PCI slot 0000:00:0f.0
    ACPI: Unable to derive IRQ for device 0000:00:0f.0
    ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
    ALI15X3: chipset revision 196
    ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x80c0-0x80c7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x80c8-0x80cf, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: HITACHI_DK23EA-30, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301683fec]
    hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(100)
    hda: cache flushes supported
    hda: hda1 hda2 hda3 hda4
    hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    ieee1394: raw1394: /dev/raw1394 device initialized
    ACPI: PCI Interrupt 0000:00:0c.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
    PCI: VIA IRQ fixup for 0000:00:0c.2, from 11 to 10
    ehci_hcd 0000:00:0c.2: EHCI Host Controller
    ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:0c.2: irq 10, io mem 0xf0404800
    ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:0c.0: UHCI Host Controller
    uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:0c.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:0c.1: UHCI Host Controller
    uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0c.0-2
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    EDAC MC: Ver: 2.0.1 Oct 19 2006
    Advanced Linux Sound Architecture Driver Version 1.0.13 (Fri Oct 06 18:28:19 2006 UTC).
    ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
    input: AT Translated Set 2 keyboard as /class/input/input1
    input: PS/2 Mouse as /class/input/input2
    input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
    AC'97 1 does not respond - RESET
    AC'97 1 access is not valid [0xffffffff], removing mixer.
    ali mixer 1 creating error.
    ALSA device list:
    #0: ALI 5451 at 0x8800, irq 11
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI Shortcut mode
    Time: tsc clocksource has been installed.
    Time: acpi_pm clocksource has been installed.
    ACPI: (supports S0 S3 S4 S5)
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 184k freed
    warning: process `touch' used the removed sysctl system call
    warning: process `touch' used the removed sysctl system call
    warning: process `touch' used the removed sysctl system call
    EXT3 FS on hda3, internal journal
    warning: process `touch' used the removed sysctl system call
    Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k
    warning: process `touch' used the removed sysctl system call
    Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158]
    Yenta: ISA IRQ mask 0x0028, PCI irq 11
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158]
    Yenta: ISA IRQ mask 0x0028, PCI irq 10
    Socket status: 30000410
    pccard: PCMCIA card inserted into slot 1
    pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
    pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
    pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
    cs: IO port probe 0xc00-0xcff: clean.
    cs: IO port probe 0xc00-0xcff: clean.
    cs: IO port probe 0x800-0x8ff: clean.
    cs: IO port probe 0x800-0x8ff: clean.
    cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x3f8-0x3ff
    cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x3f8-0x3ff
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: memory probe 0xa0000000-0xa0ffffff: clean.
    orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    pcmcia: registering new device pcmcia1.0
    eth0: Hardware identity 0001:0001:0004:0000
    eth0: Station identity 001f:0001:0008:0048
    eth0: Firmware determined as Lucent/Agere 8.72
    eth0: Ad-hoc demo mode supported
    eth0: IEEE standard IBSS ad-hoc mode supported
    eth0: WEP supported, 104-bit key
    eth0: MAC address 00:E0:63:82:2D:3F
    eth0: Station name "HERMES I"
    eth0: ready
    eth0: orinoco_cs at 1.0, irq 3, io 0x0100-0x013f
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f4e410>] 0xb7f4e410
    =======================
    dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f4e410>] 0xb7f4e410
    =======================
    dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f96410>] 0xb7f96410
    =======================
    dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f96410>] 0xb7f96410
    =======================
    dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f8a410>] 0xb7f8a410
    =======================
    dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f8a410>] 0xb7f8a410
    =======================
    dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    eth0: New link status: Connected (0001)
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7fa2410>] 0xb7fa2410
    =======================
    dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f2c410>] 0xb7f2c410
    =======================
    dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f2c410>] 0xb7f2c410
    =======================
    dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7eef410>] 0xb7eef410
    =======================
    dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7eef410>] 0xb7eef410
    =======================
    dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    slab error in verify_redzone_free(): cache `size-32': memory outside object was overwritten
    [<c0103765>] dump_trace+0x1c1/0x1f1
    [<c01037af>] show_trace_log_lvl+0x1a/0x30
    [<c0103ed8>] show_trace+0x12/0x14
    [<c0103f7b>] dump_stack+0x19/0x1b
    [<c0158357>] __slab_error+0x26/0x28
    [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
    [<c0158bb0>] kfree+0x54/0xa5
    [<c037fba4>] ioctl_standard_call+0x187/0x2a1
    [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
    [<c03763d4>] dev_ioctl+0x1fd/0x372
    [<c036b080>] sock_ioctl+0x34/0x1e8
    [<c0167a92>] do_ioctl+0x22/0x71
    [<c0167b36>] vfs_ioctl+0x55/0x29b
    [<c0167daf>] sys_ioctl+0x33/0x50
    [<c0102ff5>] sysenter_past_esp+0x56/0x79
    [<b7f59410>] 0xb7f59410
    =======================
    dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
    mtrr: 0xf8000000,0x4000000 overlaps existing 0xf8000000,0x2000000
    mtrr: 0xf8000000,0x4000000 overlaps existing 0xf8000000,0x2000000
    mtrr: 0xf8000000,0x4000000 overlaps existing 0xf8000000,0x2000000
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
    [drm] Setting GART location based on old memory map
    [drm] writeback test succeeded in 1 usecs
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode
    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.19-rc2
    # Thu Oct 19 15:48:47 2006
    #
    CONFIG_X86_32=y
    CONFIG_GENERIC_TIME=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_DMI=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32

    #
    # General setup
    #
    CONFIG_LOCALVERSION=""
    # CONFIG_LOCALVERSION_AUTO is not set
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    # CONFIG_IPC_NS is not set
    CONFIG_POSIX_MQUEUE=y
    CONFIG_BSD_PROCESS_ACCT=y
    # CONFIG_BSD_PROCESS_ACCT_V3 is not set
    # CONFIG_TASKSTATS is not set
    # CONFIG_UTS_NS is not set
    CONFIG_AUDIT=y
    CONFIG_AUDITSYSCALL=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_RELAY is not set
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    # CONFIG_SYSCTL_SYSCALL is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SHMEM=y
    CONFIG_SLAB=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    # CONFIG_SLOB is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y

    #
    # Block layer
    #
    CONFIG_BLOCK=y
    # CONFIG_LBD is not set
    # CONFIG_BLK_DEV_IO_TRACE is not set
    # CONFIG_LSF is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_AS is not set
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"

    #
    # Processor type and features
    #
    # CONFIG_SMP is not set
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MGEODE_LX is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_TSC=y
    # CONFIG_HPET_TIMER is not set
    # CONFIG_PREEMPT_NONE is not set
    # CONFIG_PREEMPT_VOLUNTARY is not set
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_BKL=y
    # CONFIG_X86_UP_APIC is not set
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=y
    CONFIG_VM86=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_X86_REBOOTFIXUPS is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    # CONFIG_DELL_RBU is not set
    # CONFIG_DCDBAS is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    CONFIG_PAGE_OFFSET=0xC0000000
    CONFIG_ARCH_FLATMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_SPARSEMEM_STATIC=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    # CONFIG_RESOURCES_64BIT is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_REGPARM=y
    CONFIG_SECCOMP=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    CONFIG_HZ_1000=y
    CONFIG_HZ=1000
    # CONFIG_KEXEC is not set
    CONFIG_PHYSICAL_START=0x100000
    CONFIG_COMPAT_VDSO=y

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    CONFIG_PM_LEGACY=y
    # CONFIG_PM_DEBUG is not set
    # CONFIG_PM_SYSFS_DEPRECATED is not set
    CONFIG_SOFTWARE_SUSPEND=y
    CONFIG_PM_STD_PARTITION="/dev/hda2"

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
    CONFIG_ACPI_AC=y
    CONFIG_ACPI_BATTERY=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=y
    CONFIG_ACPI_HOTKEY=y
    CONFIG_ACPI_FAN=y
    # CONFIG_ACPI_DOCK is not set
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_IBM is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    # CONFIG_ACPI_CONTAINER is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCIEPORTBUS is not set
    # CONFIG_PCI_MULTITHREAD_PROBE is not set
    # CONFIG_PCI_DEBUG is not set
    CONFIG_ISA_DMA_API=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set

    #
    # PCCARD (PCMCIA/CardBus) support
    #
    CONFIG_PCCARD=m
    # CONFIG_PCMCIA_DEBUG is not set
    CONFIG_PCMCIA=m
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_PCMCIA_IOCTL=y
    CONFIG_CARDBUS=y

    #
    # PC-card bridges
    #
    CONFIG_YENTA=m
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    CONFIG_PD6729=m
    CONFIG_I82092=m
    CONFIG_I82365=m
    CONFIG_TCIC=m
    CONFIG_PCMCIA_PROBE=y
    CONFIG_PCCARD_NONSTATIC=m

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y

    #
    # Networking
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    # CONFIG_NETDEBUG is not set
    CONFIG_PACKET=y
    # CONFIG_PACKET_MMAP is not set
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    # CONFIG_IP_ADVANCED_ROUTER is not set
    CONFIG_IP_FIB_HASH=y
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_XFRM_TUNNEL is not set
    # CONFIG_INET_TUNNEL is not set
    CONFIG_INET_XFRM_MODE_TRANSPORT=y
    CONFIG_INET_XFRM_MODE_TUNNEL=y
    CONFIG_INET_XFRM_MODE_BEET=y
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_DEFAULT_TCP_CONG="cubic"

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    # CONFIG_IPV6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    # CONFIG_NETWORK_SECMARK is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set

    #
    # Core Netfilter Configuration
    #
    # CONFIG_NETFILTER_NETLINK is not set
    # CONFIG_NF_CONNTRACK is not set
    # CONFIG_NETFILTER_XTABLES is not set

    #
    # IP: Netfilter Configuration
    #
    # CONFIG_IP_NF_CONNTRACK is not set
    # CONFIG_IP_NF_QUEUE is not set

    #
    # DCCP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_DCCP is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set

    #
    # TIPC Configuration (EXPERIMENTAL)
    #
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set

    #
    # Network testing
    #
    CONFIG_NET_PKTGEN=m
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    # CONFIG_IEEE80211 is not set
    CONFIG_WIRELESS_EXT=y

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=m
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_SYS_HYPERVISOR is not set

    #
    # Connector - unified userspace <-> kernelspace linker
    #
    # CONFIG_CONNECTOR is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_PC_PCMCIA is not set
    # CONFIG_PARPORT_GSC is not set
    # CONFIG_PARPORT_AX88796 is not set
    # CONFIG_PARPORT_1284 is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    # CONFIG_ISAPNP is not set
    # CONFIG_PNPBIOS is not set
    CONFIG_PNPACPI=y

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=y
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    # CONFIG_BLK_DEV_LOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    # CONFIG_BLK_DEV_RAM is not set
    CONFIG_BLK_DEV_INITRD=y
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    # CONFIG_BLK_DEV_IDECS is not set
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    CONFIG_BLK_DEV_IDESCSI=m
    # CONFIG_IDE_TASK_IOCTL is not set

    #
    # IDE chipset support/bugfixes
    #
    # CONFIG_IDE_GENERIC is not set
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    # CONFIG_BLK_DEV_GENERIC is not set
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    CONFIG_BLK_DEV_ALI15X3=y
    # CONFIG_WDC_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_CS5535 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_JMICRON is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_IT821X is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_ARM is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    # CONFIG_BLK_DEV_SR is not set
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI Transports
    #
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_ISCSI_TCP is not set
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_AIC94XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_SCSI_ARCMSR is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_MEGARAID_SAS is not set
    # CONFIG_SCSI_HPTIOP is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_STEX is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    # CONFIG_SCSI_QLA_FC is not set
    # CONFIG_SCSI_QLA_ISCSI is not set
    # CONFIG_SCSI_LPFC is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # PCMCIA SCSI adapter support
    #
    # CONFIG_PCMCIA_AHA152X is not set
    # CONFIG_PCMCIA_FDOMAIN is not set
    # CONFIG_PCMCIA_NINJA_SCSI is not set
    # CONFIG_PCMCIA_QLOGIC is not set
    # CONFIG_PCMCIA_SYM53C500 is not set

    #
    # Serial ATA (prod) and Parallel ATA (experimental) drivers
    #
    # CONFIG_ATA is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set
    # CONFIG_FUSION_SPI is not set
    # CONFIG_FUSION_FC is not set
    # CONFIG_FUSION_SAS is not set

    #
    # IEEE 1394 (FireWire) support
    #
    CONFIG_IEEE1394=y

    #
    # Subsystem Options
    #
    # CONFIG_IEEE1394_VERBOSEDEBUG is not set
    # CONFIG_IEEE1394_OUI_DB is not set
    # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
    # CONFIG_IEEE1394_EXPORT_FULL_API is not set

    #
    # Device Drivers
    #

    #
    # Texas Instruments PCILynx requires I2C
    #
    CONFIG_IEEE1394_OHCI1394=y

    #
    # Protocol Drivers
    #
    # CONFIG_IEEE1394_VIDEO1394 is not set
    # CONFIG_IEEE1394_SBP2 is not set
    # CONFIG_IEEE1394_ETH1394 is not set
    # CONFIG_IEEE1394_DV1394 is not set
    CONFIG_IEEE1394_RAWIO=y

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # PHY device support
    #
    # CONFIG_PHYLIB is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_CASSINI is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_AC3200 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    # CONFIG_E100 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    CONFIG_8139TOO=m
    CONFIG_8139TOO_PIO=y
    # CONFIG_8139TOO_TUNE_TWISTER is not set
    # CONFIG_8139TOO_8129 is not set
    # CONFIG_8139_OLD_RX_RESET is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_NET_POCKET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SKGE is not set
    # CONFIG_SKY2 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set
    # CONFIG_BNX2 is not set
    # CONFIG_QLA3XXX is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_CHELSIO_T1 is not set
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set
    # CONFIG_MYRI10GE is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    CONFIG_NET_RADIO=y
    # CONFIG_NET_WIRELESS_RTNETLINK is not set

    #
    # Obsolete Wireless cards support (pre-802.11)
    #
    # CONFIG_STRIP is not set
    # CONFIG_ARLAN is not set
    # CONFIG_WAVELAN is not set
    # CONFIG_PCMCIA_WAVELAN is not set
    # CONFIG_PCMCIA_NETWAVE is not set

    #
    # Wireless 802.11 Frequency Hopping cards support
    #
    # CONFIG_PCMCIA_RAYCS is not set

    #
    # Wireless 802.11b ISA/PCI cards support
    #
    # CONFIG_IPW2100 is not set
    # CONFIG_IPW2200 is not set
    # CONFIG_AIRO is not set
    CONFIG_HERMES=m
    # CONFIG_PLX_HERMES is not set
    # CONFIG_TMD_HERMES is not set
    # CONFIG_NORTEL_HERMES is not set
    # CONFIG_PCI_HERMES is not set
    # CONFIG_ATMEL is not set

    #
    # Wireless 802.11b Pcmcia/Cardbus cards support
    #
    CONFIG_PCMCIA_HERMES=m
    # CONFIG_PCMCIA_SPECTRUM is not set
    # CONFIG_AIRO_CS is not set
    # CONFIG_PCMCIA_WL3501 is not set

    #
    # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
    #
    # CONFIG_PRISM54 is not set
    # CONFIG_USB_ZD1201 is not set
    # CONFIG_HOSTAP is not set
    CONFIG_NET_WIRELESS=y

    #
    # PCMCIA network device support
    #
    # CONFIG_NET_PCMCIA is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y
    # CONFIG_INPUT_FF_MEMLESS is not set

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_GAMEPORT is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    # CONFIG_SERIAL_8250 is not set

    #
    # Non-8250 serial port support
    #
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=y
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    # CONFIG_TIPAR is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_HW_RANDOM is not set
    # CONFIG_NVRAM is not set
    # CONFIG_RTC is not set
    # CONFIG_GEN_RTC is not set
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    CONFIG_SONYPI=m

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    CONFIG_AGP_ATI=y
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_R128 is not set
    CONFIG_DRM_RADEON=y
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set
    # CONFIG_DRM_VIA is not set
    # CONFIG_DRM_SAVAGE is not set

    #
    # PCMCIA character devices
    #
    # CONFIG_SYNCLINK_CS is not set
    # CONFIG_CARDMAN_4000 is not set
    # CONFIG_CARDMAN_4040 is not set
    # CONFIG_MWAVE is not set
    # CONFIG_PC8736x_GPIO is not set
    # CONFIG_NSC_GPIO is not set
    # CONFIG_CS5535_GPIO is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # TPM devices
    #
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set

    #
    # I2C support
    #
    # CONFIG_I2C is not set

    #
    # SPI support
    #
    CONFIG_SPI=y
    # CONFIG_SPI_DEBUG is not set
    CONFIG_SPI_MASTER=y

    #
    # SPI Master Controller Drivers
    #
    # CONFIG_SPI_BITBANG is not set
    # CONFIG_SPI_BUTTERFLY is not set

    #
    # SPI Protocol Masters
    #

    #
    # Dallas's 1-wire bus
    #

    #
    # Hardware Monitoring support
    #
    CONFIG_HWMON=y
    # CONFIG_HWMON_VID is not set
    # CONFIG_SENSORS_ABITUGURU is not set
    # CONFIG_SENSORS_K8TEMP is not set
    # CONFIG_SENSORS_F71805F is not set
    # CONFIG_SENSORS_LM70 is not set
    # CONFIG_SENSORS_VT1211 is not set
    # CONFIG_SENSORS_HDAPS is not set
    # CONFIG_HWMON_DEBUG_CHIP is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set
    # CONFIG_TIFM_CORE is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set
    # CONFIG_USB_DABUSB is not set

    #
    # Graphics support
    #
    CONFIG_FIRMWARE_EDID=y
    CONFIG_FB=y
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_MACMODES is not set
    # CONFIG_FB_BACKLIGHT is not set
    # CONFIG_FB_MODE_HELPERS is not set
    # CONFIG_FB_TILEBLITTING is not set
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ARC is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    CONFIG_FB_VESA=y
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_I810 is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_CYBLA is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    CONFIG_VGACON_SOFT_SCROLLBACK=y
    CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
    CONFIG_VIDEO_SELECT=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y

    #
    # Logo configuration
    #
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y
    # CONFIG_BACKLIGHT_LCD_SUPPORT is not set

    #
    # Sound
    #
    CONFIG_SOUND=y

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_RAWMIDI=y
    CONFIG_SND_SEQUENCER=y
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=y
    CONFIG_SND_PCM_OSS=y
    CONFIG_SND_PCM_OSS_PLUGINS=y
    CONFIG_SND_SEQUENCER_OSS=y
    # CONFIG_SND_DYNAMIC_MINORS is not set
    CONFIG_SND_SUPPORT_OLD_API=y
    CONFIG_SND_VERBOSE_PROCFS=y
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    CONFIG_SND_MPU401_UART=y
    CONFIG_SND_AC97_CODEC=y
    CONFIG_SND_AC97_BUS=y
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_MTS64 is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # ISA devices
    #
    # CONFIG_SND_ADLIB is not set
    # CONFIG_SND_AD1816A is not set
    # CONFIG_SND_AD1848 is not set
    # CONFIG_SND_ALS100 is not set
    # CONFIG_SND_AZT2320 is not set
    # CONFIG_SND_CMI8330 is not set
    # CONFIG_SND_CS4231 is not set
    # CONFIG_SND_CS4232 is not set
    # CONFIG_SND_CS4236 is not set
    # CONFIG_SND_DT019X is not set
    # CONFIG_SND_ES968 is not set
    # CONFIG_SND_ES1688 is not set
    # CONFIG_SND_ES18XX is not set
    # CONFIG_SND_GUSCLASSIC is not set
    # CONFIG_SND_GUSEXTREME is not set
    # CONFIG_SND_GUSMAX is not set
    # CONFIG_SND_INTERWAVE is not set
    # CONFIG_SND_INTERWAVE_STB is not set
    # CONFIG_SND_OPL3SA2 is not set
    # CONFIG_SND_OPTI92X_AD1848 is not set
    # CONFIG_SND_OPTI92X_CS4231 is not set
    # CONFIG_SND_OPTI93X is not set
    # CONFIG_SND_MIRO is not set
    # CONFIG_SND_SB8 is not set
    # CONFIG_SND_SB16 is not set
    # CONFIG_SND_SBAWE is not set
    # CONFIG_SND_SGALAXY is not set
    # CONFIG_SND_SSCAPE is not set
    # CONFIG_SND_WAVEFRONT is not set

    #
    # PCI devices
    #
    # CONFIG_SND_AD1889 is not set
    # CONFIG_SND_ALS300 is not set
    # CONFIG_SND_ALS4000 is not set
    CONFIG_SND_ALI5451=y
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS5535AUDIO is not set
    # CONFIG_SND_DARLA20 is not set
    # CONFIG_SND_GINA20 is not set
    # CONFIG_SND_LAYLA20 is not set
    # CONFIG_SND_DARLA24 is not set
    # CONFIG_SND_GINA24 is not set
    # CONFIG_SND_LAYLA24 is not set
    # CONFIG_SND_MONA is not set
    # CONFIG_SND_MIA is not set
    # CONFIG_SND_ECHO3G is not set
    # CONFIG_SND_INDIGO is not set
    # CONFIG_SND_INDIGOIO is not set
    # CONFIG_SND_INDIGODJ is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_HDA_INTEL is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_HDSPM is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    CONFIG_SND_INTEL8X0=y
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_PCXHR is not set
    # CONFIG_SND_RIPTIDE is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_AC97_POWER_SAVE is not set

    #
    # USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set

    #
    # PCMCIA devices
    #
    # CONFIG_SND_VXPOCKET is not set
    # CONFIG_SND_PDAUDIOCF is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # USB support
    #
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_BANDWIDTH is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    # CONFIG_USB_EHCI_TT_NEWSCHED is not set
    # CONFIG_USB_ISP116X_HCD is not set
    # CONFIG_USB_OHCI_HCD is not set
    CONFIG_USB_UHCI_HCD=y
    # CONFIG_USB_SL811_HCD is not set

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=y

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #

    #
    # may also be needed; see USB_STORAGE Help for more information
    #
    CONFIG_USB_STORAGE=y
    CONFIG_USB_STORAGE_DEBUG=y
    CONFIG_USB_STORAGE_DATAFAB=y
    CONFIG_USB_STORAGE_FREECOM=y
    CONFIG_USB_STORAGE_ISD200=y
    CONFIG_USB_STORAGE_DPCM=y
    CONFIG_USB_STORAGE_USBAT=y
    CONFIG_USB_STORAGE_SDDR09=y
    CONFIG_USB_STORAGE_SDDR55=y
    CONFIG_USB_STORAGE_JUMPSHOT=y
    # CONFIG_USB_STORAGE_ALAUDA is not set
    # CONFIG_USB_STORAGE_KARMA is not set
    # CONFIG_USB_LIBUSUAL is not set

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=y
    CONFIG_USB_HIDINPUT=y
    # CONFIG_USB_HIDINPUT_POWERBOOK is not set
    # CONFIG_HID_FF is not set
    # CONFIG_USB_HIDDEV is not set
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_ACECAD is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_TOUCHSCREEN is not set
    # CONFIG_USB_YEALINK is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set
    # CONFIG_USB_ATI_REMOTE2 is not set
    # CONFIG_USB_KEYSPAN_REMOTE is not set
    # CONFIG_USB_APPLETOUCH is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set

    #
    # USB Network Adapters
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set
    CONFIG_USB_MON=y

    #
    # USB port drivers
    #
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_ADUTUX is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYPRESS_CY7C63 is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGET is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    # CONFIG_USB_SISUSBVGA is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TEST is not set

    #
    # USB DSL modem support
    #

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # MMC/SD Card support
    #
    CONFIG_MMC=m
    # CONFIG_MMC_DEBUG is not set
    CONFIG_MMC_BLOCK=m
    CONFIG_MMC_SDHCI=m
    CONFIG_MMC_WBSD=m
    # CONFIG_MMC_TIFM_SD is not set

    #
    # LED devices
    #
    # CONFIG_NEW_LEDS is not set

    #
    # LED drivers
    #

    #
    # LED Triggers
    #

    #
    # InfiniBand support
    #
    # CONFIG_INFINIBAND is not set

    #
    # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
    #
    CONFIG_EDAC=y

    #
    # Reporting subsystems
    #
    # CONFIG_EDAC_DEBUG is not set
    CONFIG_EDAC_MM_EDAC=y
    # CONFIG_EDAC_AMD76X is not set
    # CONFIG_EDAC_E7XXX is not set
    # CONFIG_EDAC_E752X is not set
    # CONFIG_EDAC_I82875P is not set
    # CONFIG_EDAC_I82860 is not set
    # CONFIG_EDAC_R82600 is not set
    CONFIG_EDAC_POLL=y

    #
    # Real Time Clock
    #
    # CONFIG_RTC_CLASS is not set

    #
    # DMA Engine support
    #
    # CONFIG_DMA_ENGINE is not set

    #
    # DMA Clients
    #

    #
    # DMA Devices
    #

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    # CONFIG_EXT2_FS_XATTR is not set
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    # CONFIG_EXT3_FS_POSIX_ACL is not set
    # CONFIG_EXT3_FS_SECURITY is not set
    # CONFIG_EXT4DEV_FS is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_FS_POSIX_ACL is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_GFS2_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    CONFIG_AUTOFS4_FS=y
    # CONFIG_FUSE_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    # CONFIG_ZISOFS is not set
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=1250
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
    CONFIG_NTFS_FS=y
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_POSIX_ACL is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    # CONFIG_CONFIGFS_FS is not set

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=y
    # CONFIG_NFS_V3 is not set
    # CONFIG_NFS_V4 is not set
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    # CONFIG_NFSD_V3 is not set
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=y
    CONFIG_EXPORTFS=y
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=y
    # CONFIG_RPCSEC_GSS_KRB5 is not set
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    CONFIG_SMB_FS=y
    CONFIG_SMB_NLS_DEFAULT=y
    CONFIG_SMB_NLS_REMOTE="cp1250"
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # CONFIG_9P_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-2"
    # CONFIG_NLS_CODEPAGE_437 is not set
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    CONFIG_NLS_CODEPAGE_852=y
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    # CONFIG_NLS_ASCII is not set
    # CONFIG_NLS_ISO8859_1 is not set
    CONFIG_NLS_ISO8859_2=y
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set

    #
    # Instrumentation Support
    #
    # CONFIG_PROFILING is not set
    # CONFIG_KPROBES is not set

    #
    # Kernel hacking
    #
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    CONFIG_ENABLE_MUST_CHECK=y
    CONFIG_MAGIC_SYSRQ=y
    # CONFIG_UNUSED_SYMBOLS is not set
    CONFIG_DEBUG_KERNEL=y
    CONFIG_LOG_BUF_SHIFT=17
    CONFIG_DETECT_SOFTLOCKUP=y
    # CONFIG_SCHEDSTATS is not set
    CONFIG_DEBUG_SLAB=y
    CONFIG_DEBUG_SLAB_LEAK=y
    CONFIG_DEBUG_PREEMPT=y
    CONFIG_DEBUG_RT_MUTEXES=y
    CONFIG_DEBUG_PI_LIST=y
    CONFIG_RT_MUTEX_TESTER=y
    CONFIG_DEBUG_SPINLOCK=y
    CONFIG_DEBUG_MUTEXES=y
    CONFIG_DEBUG_RWSEMS=y
    # CONFIG_DEBUG_LOCK_ALLOC is not set
    # CONFIG_PROVE_LOCKING is not set
    CONFIG_DEBUG_SPINLOCK_SLEEP=y
    CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
    # CONFIG_DEBUG_KOBJECT is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    CONFIG_DEBUG_INFO=y
    CONFIG_DEBUG_FS=y
    CONFIG_DEBUG_VM=y
    CONFIG_DEBUG_LIST=y
    CONFIG_FRAME_POINTER=y
    CONFIG_UNWIND_INFO=y
    CONFIG_STACK_UNWIND=y
    CONFIG_FORCED_INLINING=y
    # CONFIG_HEADERS_CHECK is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    CONFIG_EARLY_PRINTK=y
    CONFIG_DEBUG_STACKOVERFLOW=y
    # CONFIG_DEBUG_STACK_USAGE is not set

    #
    # Page alloc debug is incompatible with Software Suspend on i386
    #
    # CONFIG_DEBUG_RODATA is not set
    # CONFIG_4KSTACKS is not set
    CONFIG_DOUBLEFAULT=y

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    # CONFIG_CRYPTO is not set

    #
    # Library routines
    #
    CONFIG_CRC_CCITT=m
    # CONFIG_CRC16 is not set
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=m
    CONFIG_AUDIT_GENERIC=y
    CONFIG_PLIST=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_KTIME_SCALAR=y
    \
     
     \ /
      Last update: 2006-10-19 16:47    [W:0.147 / U:0.776 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site