Messages in this thread | | | Date | Fri, 13 Oct 2006 22:26:08 -0700 | From | Andrew Morton <> | Subject | Re: [PATCH] [PCI] Prevent user config space access during power state transitions |
| |
On Tue, 10 Oct 2006 07:38:17 -0600 Matthew Wilcox <matthew@wil.cx> wrote:
> Section 5.3 of PCI Bus Power Management 1.2 states: > > There is a minimum recovery time requirement of 200 µs between when > a function is programmed from D2 to D0 and when the function can be > next accessed as a target (including PCI configuration accesses). If > an access is attempted in violation of the specified minimum recovery > time, undefined system behavior may result. > > We have to prevent the user running lspci during this time, and > fortunately we already have the pci_block_user_cfg_access() API to > do this. > > Signed-off-by: Matthew Wilcox <matthew@wil.cx> > --- > drivers/pci/pci.c | 8 ++++++++ > 1 files changed, 8 insertions(+), 0 deletions(-) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index a544997..1bb059a 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -366,6 +366,11 @@ pci_set_power_state(struct pci_dev *dev, > break; > } > > + /* We have to prevent accesses to config space while transitioning > + * between power states > + */ > + pci_block_user_cfg_access(dev); > + > /* enter specified state */ > pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); > > @@ -383,6 +388,9 @@ pci_set_power_state(struct pci_dev *dev, > if (platform_pci_set_power_state) > platform_pci_set_power_state(dev, state); > > + /* Should be safe to allow userspace access to the device again now */ > + pci_unblock_user_cfg_access(dev); > + > dev->current_state = state; > > /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
This patch independently causes the same failure: the Vaio doesn't power off after suspend-to-disk and after a manual power cycle and resume, networking is dead.
The message `acpi_power_off called' never comes out, so something probably got stuck.
Or maybe something failed somewhere and the error code which would have helped us solve this bug was simply ignored.
Note that pci_block_user_cfg_access() calls pci_save_state(), which can fail. But pci_block_user_cfg_access() discards that information and returns void. If this happens, userspace config space reads will return... what?
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |