Messages in this thread Patch in this message | | | Date | Fri, 6 Jan 2006 17:33:06 +0100 | From | Adrian Bunk <> | Subject | [2.6 patch] spelling: s/usefull/useful/ |
| |
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
Documentation/networking/sk98lin.txt | 2 +- Documentation/power/swsusp.txt | 4 ++-- Makefile | 2 +- arch/xtensa/kernel/time.c | 2 +- drivers/media/radio/radio-sf16fmr2.c | 2 +- drivers/net/sk98lin/skdim.c | 2 +- drivers/net/sk98lin/skge.c | 2 +- drivers/net/sk98lin/skgepnmi.c | 8 ++++---- drivers/w1/Kconfig | 2 +- 9 files changed, 13 insertions(+), 13 deletions(-)
--- linux-2.6.15-mm1-full/arch/xtensa/kernel/time.c.old 2006-01-06 16:53:58.000000000 +0100 +++ linux-2.6.15-mm1-full/arch/xtensa/kernel/time.c 2006-01-06 16:54:10.000000000 +0100 @@ -201,7 +201,7 @@ if ((signed long)(get_ccount() - next) > 0) goto again; - /* Allow platform to do something usefull (Wdog). */ + /* Allow platform to do something useful (Wdog). */ platform_heartbeat(); --- linux-2.6.15-mm1-full/Documentation/networking/sk98lin.txt.old 2006-01-06 16:54:56.000000000 +0100 +++ linux-2.6.15-mm1-full/Documentation/networking/sk98lin.txt 2006-01-06 16:54:59.000000000 +0100 @@ -245,7 +245,7 @@ This parameters is only relevant if auto-negotiation for this port is not set to "Sense". If auto-negotiation is set to "On", all three values are possible. If it is set to "Off", only "Full" and "Half" are allowed. -This parameter is usefull if your link partner does not support all +This parameter is useful if your link partner does not support all possible combinations. Flow Control --- linux-2.6.15-mm1-full/Documentation/power/swsusp.txt.old 2006-01-06 16:55:10.000000000 +0100 +++ linux-2.6.15-mm1-full/Documentation/power/swsusp.txt 2006-01-06 16:55:17.000000000 +0100 @@ -212,7 +212,7 @@ cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null -after resume. swapoff -a; swapon -a may also be usefull. +after resume. swapoff -a; swapon -a may also be useful. Q: What happens to devices during swsusp? They seem to be resumed during system suspend? @@ -323,7 +323,7 @@ A: No, it should work okay, as long as your app does not mlock() it. Just prepare big enough swap partition. -Q: What information is usefull for debugging suspend-to-disk problems? +Q: What information is useful for debugging suspend-to-disk problems? A: Well, last messages on the screen are always useful. If something is broken, it is usually some kernel driver, therefore trying with as --- linux-2.6.15-mm1-full/drivers/media/radio/radio-sf16fmr2.c.old 2006-01-06 16:55:28.000000000 +0100 +++ linux-2.6.15-mm1-full/drivers/media/radio/radio-sf16fmr2.c 2006-01-06 16:55:33.000000000 +0100 @@ -48,7 +48,7 @@ static int radio_nr = -1; /* hw precision is 12.5 kHz - * It is only usefull to give freq in intervall of 200 (=0.0125Mhz), + * It is only useful to give freq in intervall of 200 (=0.0125Mhz), * other bits will be truncated */ #define RSF16_ENCODE(x) ((x)/200+856) --- linux-2.6.15-mm1-full/drivers/net/sk98lin/skdim.c.old 2006-01-06 16:55:41.000000000 +0100 +++ linux-2.6.15-mm1-full/drivers/net/sk98lin/skdim.c 2006-01-06 16:55:45.000000000 +0100 @@ -180,7 +180,7 @@ /* ** The number of interrupts per sec is the same as expected. ** Evalulate the descriptor-ratio. If it has changed, a resize - ** in the moderation timer might be usefull + ** in the moderation timer might be useful */ if (M_DIMINFO.AutoSizing) { ResizeDimTimerDuration(pAC); --- linux-2.6.15-mm1-full/drivers/net/sk98lin/skge.c.old 2006-01-06 16:55:53.000000000 +0100 +++ linux-2.6.15-mm1-full/drivers/net/sk98lin/skge.c 2006-01-06 16:55:57.000000000 +0100 @@ -2859,7 +2859,7 @@ * Description: * This function is called if an ioctl is issued on the device. * There are three subfunction for reading, writing and test-writing - * the private MIB data structure (usefull for SysKonnect-internal tools). + * the private MIB data structure (useful for SysKonnect-internal tools). * * Returns: * 0, if everything is ok --- linux-2.6.15-mm1-full/drivers/net/sk98lin/skgepnmi.c.old 2006-01-06 16:56:08.000000000 +0100 +++ linux-2.6.15-mm1-full/drivers/net/sk98lin/skgepnmi.c 2006-01-06 16:56:18.000000000 +0100 @@ -607,7 +607,7 @@ * Description: * Calls a general sub-function for all this stuff. The preset does * the same as a set, but returns just before finally setting the - * new value. This is usefull to check if a set might be successfull. + * new value. This is useful to check if a set might be successfull. * If the instance -1 is passed, an array of values is supposed and * all instances of the OID will be set. * @@ -650,7 +650,7 @@ * Description: * Calls a general sub-function for all this stuff. The preset does * the same as a set, but returns just before finally setting the - * new value. This is usefull to check if a set might be successfull. + * new value. This is useful to check if a set might be successfull. * If the instance -1 is passed, an array of values is supposed and * all instances of the OID will be set. * @@ -866,7 +866,7 @@ * Description: * Calls a general sub-function for all this set stuff. The preset does * the same as a set, but returns just before finally setting the - * new value. This is usefull to check if a set might be successfull. + * new value. This is useful to check if a set might be successfull. * The sub-function runs through the IdTable, checks which OIDs are able * to set, and calls the handler function of the OID to perform the * preset. The return value of the function will also be stored in @@ -6324,7 +6324,7 @@ * * Description: * The COMMON module only tells us if the mode is half or full duplex. - * But in the decade of auto sensing it is usefull for the user to + * But in the decade of auto sensing it is useful for the user to * know if the mode was negotiated or forced. Therefore we have a * look to the mode, which was last used by the negotiation process. * --- linux-2.6.15-mm1-full/drivers/w1/Kconfig.old 2006-01-06 16:56:27.000000000 +0100 +++ linux-2.6.15-mm1-full/drivers/w1/Kconfig 2006-01-06 16:56:30.000000000 +0100 @@ -3,7 +3,7 @@ config W1 tristate "Dallas's 1-wire support" ---help--- - Dallas's 1-wire bus is usefull to connect slow 1-pin devices + Dallas's 1-wire bus is useful to connect slow 1-pin devices such as iButtons and thermal sensors. If you want W1 support, you should say Y here. --- linux-2.6.15-mm1-full/Makefile.old 2006-01-06 16:56:45.000000000 +0100 +++ linux-2.6.15-mm1-full/Makefile 2006-01-06 16:56:49.000000000 +0100 @@ -251,7 +251,7 @@ # If it is set to "silent_", nothing wil be printed at all, since # the variable $(silent_cmd_cc_o_c) doesn't exist. # -# A simple variant is to prefix commands with $(Q) - that's usefull +# A simple variant is to prefix commands with $(Q) - that's useful # for commands that shall be hidden in non-verbose mode. # # $(Q)ln $@ :< - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |