lkml.org 
[lkml]   [2006]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: Mouse stalls (again) with 2.6.15-mm2
Date
On Monday 09 January 2006 15:37, Jesper Juhl wrote:
> On 12/21/05, Jesper Juhl <jesper.juhl@gmail.com> wrote:
> > On 12/21/05, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> > > On 12/11/05, Jesper Juhl <jesper.juhl@gmail.com> wrote:
> > > > On 12/11/05, Dmitry Torokhov <dtor_core@ameritech.net> wrote:
> > > >
> > > > > To stop resync attempts do:
> > > > >
> > > > > echo -n 0 > /sys/bus/serio/devices/serioX/resync_time
> > > > >
> > > > > where serioX is serio port asociated with your mouse.
> > > > >
> > > > This cures the problem nicely with no obvious ill effects with the
> > > > mouse plugged into the KVM...
> > > >
> > >
> > > Jesper,
> > >
> > > Could you please try applying the attached patch to -mm and see if you
> > > still have "resync failed" messages when you don't "echo 0" into
> > > resync_time attribute?
> > >
> > I applied the patch to 2.6.15-rc5-mm3, took out the "echo 0 to
> > resync_time" workaround that I had in rc.local and I no longer see the
> > "resync failed" messages in dmesg.
> > With this patch applied everything seems to be working OK with the
> > mouse attached to the KVM.
> >
>
> Hi Dmitry,
>
> I'm sorry to report that this problem made a comeback :-(
> With 2.6.15-mm2 I again get the mouse stalls and these messages in dmesg :
>
> [ 64.351000] psmouse.c: resync failed, issuing reconnect request
> [ 94.210000] psmouse.c: resync failed, issuing reconnect request
> [ 132.850000] psmouse.c: resync failed, issuing reconnect request
> [ 148.498000] psmouse.c: resync failed, issuing reconnect request
> [ 185.414000] psmouse.c: resync failed, issuing reconnect request
> [ 220.509000] psmouse.c: resync failed, issuing reconnect request
> [ 375.436000] psmouse.c: resync failed, issuing reconnect request
> [ 406.410000] psmouse.c: resync failed, issuing reconnect request
> [ 419.382000] psmouse.c: resync failed, issuing reconnect request
> [ 432.016000] psmouse.c: resync failed, issuing reconnect request
> [ 448.275000] psmouse.c: resync failed, issuing reconnect request
> [ 462.244000] psmouse.c: resync failed, issuing reconnect request
> [ 477.461000] psmouse.c: resync failed, issuing reconnect request
> [ 490.851000] psmouse.c: resync failed, issuing reconnect request
> [ 533.566000] psmouse.c: resync failed, issuing reconnect request
> [ 563.348000] psmouse.c: resync failed, issuing reconnect request
> [ 580.606000] psmouse.c: resync failed, issuing reconnect request
> [ 620.961000] psmouse.c: resync failed, issuing reconnect request
> [ 639.404000] psmouse.c: resync failed, issuing reconnect request
> [ 690.256000] psmouse.c: resync failed, issuing reconnect request
> [ 698.772000] psmouse.c: resync failed, issuing reconnect request
> [ 716.679000] psmouse.c: resync failed, issuing reconnect request
>
> 2.6.15 is fine.
>

Hi,

Here is the latest version of psmouse resync patch, it should have all
the fixes and handle both Jesper's KVM and Frank's touchpad. I would
appreciate if you give it a spin.

The patch is against Linus, not -mm; for -mm you will have to revert
original resync patch.

Thanks!

--
Dmitry

Subject: input: psmouse resync

Input: attempt to re-synchronize mouse every 5 seconds

This should help driver to deal vith KVMs that reset mice when
switching between boxes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

drivers/input/mouse/alps.c | 38 ++++
drivers/input/mouse/logips2pp.c | 2
drivers/input/mouse/psmouse-base.c | 316 +++++++++++++++++++++++++++++--------
drivers/input/mouse/psmouse.h | 9 -
drivers/input/mouse/synaptics.c | 2
5 files changed, 301 insertions(+), 66 deletions(-)

Index: work/drivers/input/mouse/psmouse.h
===================================================================
--- work.orig/drivers/input/mouse/psmouse.h
+++ work/drivers/input/mouse/psmouse.h
@@ -7,7 +7,7 @@
#define PSMOUSE_CMD_GETINFO 0x03e9
#define PSMOUSE_CMD_SETSTREAM 0x00ea
#define PSMOUSE_CMD_SETPOLL 0x00f0
-#define PSMOUSE_CMD_POLL 0x03eb
+#define PSMOUSE_CMD_POLL 0x00eb /* caller sets number of bytes to receive */
#define PSMOUSE_CMD_GETID 0x02f2
#define PSMOUSE_CMD_SETRATE 0x10f3
#define PSMOUSE_CMD_ENABLE 0x00f4
@@ -23,6 +23,7 @@
enum psmouse_state {
PSMOUSE_IGNORE,
PSMOUSE_INITIALIZING,
+ PSMOUSE_RESYNCING,
PSMOUSE_CMD_MODE,
PSMOUSE_ACTIVATED,
};
@@ -38,15 +39,19 @@ struct psmouse {
void *private;
struct input_dev *dev;
struct ps2dev ps2dev;
+ struct work_struct resync_work;
char *vendor;
char *name;
unsigned char packet[8];
+ unsigned char badbyte;
unsigned char pktcnt;
unsigned char pktsize;
unsigned char type;
+ unsigned char acks_disable_command;
unsigned int model;
unsigned long last;
unsigned long out_of_sync;
+ unsigned long num_resyncs;
enum psmouse_state state;
char devname[64];
char phys[32];
@@ -54,6 +59,7 @@ struct psmouse {
unsigned int rate;
unsigned int resolution;
unsigned int resetafter;
+ unsigned int resync_time;
unsigned int smartscroll; /* Logitech only */

psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse, struct pt_regs *regs);
@@ -62,6 +68,7 @@ struct psmouse {

int (*reconnect)(struct psmouse *psmouse);
void (*disconnect)(struct psmouse *psmouse);
+ int (*poll)(struct psmouse *psmouse);

void (*pt_activate)(struct psmouse *psmouse);
void (*pt_deactivate)(struct psmouse *psmouse);
Index: work/drivers/input/mouse/psmouse-base.c
===================================================================
--- work.orig/drivers/input/mouse/psmouse-base.c
+++ work/drivers/input/mouse/psmouse-base.c
@@ -54,10 +54,14 @@ static unsigned int psmouse_smartscroll
module_param_named(smartscroll, psmouse_smartscroll, bool, 0644);
MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");

-static unsigned int psmouse_resetafter;
+static unsigned int psmouse_resetafter = 5;
module_param_named(resetafter, psmouse_resetafter, uint, 0644);
MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never).");

+static unsigned int psmouse_resync_time = 5;
+module_param_named(resync_time, psmouse_resync_time, uint, 0644);
+MODULE_PARM_DESC(resync_time, "How long can mouse stay idle before forcing resync (in seconds, 0 = never).");
+
PSMOUSE_DEFINE_ATTR(protocol, S_IWUSR | S_IRUGO,
NULL,
psmouse_attr_show_protocol, psmouse_attr_set_protocol);
@@ -70,12 +74,16 @@ PSMOUSE_DEFINE_ATTR(resolution, S_IWUSR
PSMOUSE_DEFINE_ATTR(resetafter, S_IWUSR | S_IRUGO,
(void *) offsetof(struct psmouse, resetafter),
psmouse_show_int_attr, psmouse_set_int_attr);
+PSMOUSE_DEFINE_ATTR(resync_time, S_IWUSR | S_IRUGO,
+ (void *) offsetof(struct psmouse, resync_time),
+ psmouse_show_int_attr, psmouse_set_int_attr);

static struct attribute *psmouse_attributes[] = {
&psmouse_attr_protocol.dattr.attr,
&psmouse_attr_rate.dattr.attr,
&psmouse_attr_resolution.dattr.attr,
&psmouse_attr_resetafter.dattr.attr,
+ &psmouse_attr_resync_time.dattr.attr,
NULL
};

@@ -98,6 +106,8 @@ __obsolete_setup("psmouse_rate=");
*/
static DECLARE_MUTEX(psmouse_sem);

+static struct workqueue_struct *kpsmoused_wq;
+
struct psmouse_protocol {
enum psmouse_type type;
char *name;
@@ -178,15 +188,79 @@ static psmouse_ret_t psmouse_process_byt
}

/*
- * psmouse_interrupt() handles incoming characters, either gathering them into
- * packets or passing them to the command routine as command output.
+ * __psmouse_set_state() sets new psmouse state and resets all flags.
+ */
+
+static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
+{
+ psmouse->state = new_state;
+ psmouse->pktcnt = psmouse->out_of_sync = 0;
+ psmouse->ps2dev.flags = 0;
+ psmouse->last = jiffies;
+}
+
+
+/*
+ * psmouse_set_state() sets new psmouse state and resets all flags and
+ * counters while holding serio lock so fighting with interrupt handler
+ * is not a concern.
+ */
+
+static void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
+{
+ serio_pause_rx(psmouse->ps2dev.serio);
+ __psmouse_set_state(psmouse, new_state);
+ serio_continue_rx(psmouse->ps2dev.serio);
+}
+
+/*
+ * psmouse_handle_byte() processes one byte of the input data stream
+ * by calling corresponding protocol handler.
+ */
+
+static int psmouse_handle_byte(struct psmouse *psmouse, struct pt_regs *regs)
+{
+ psmouse_ret_t rc = psmouse->protocol_handler(psmouse, regs);
+
+ switch (rc) {
+ case PSMOUSE_BAD_DATA:
+ if (psmouse->state == PSMOUSE_ACTIVATED) {
+ printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
+ psmouse->name, psmouse->phys, psmouse->pktcnt);
+ if (++psmouse->out_of_sync == psmouse->resetafter) {
+ __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
+ serio_reconnect(psmouse->ps2dev.serio);
+ return -1;
+ }
+ }
+ psmouse->pktcnt = 0;
+ break;
+
+ case PSMOUSE_FULL_PACKET:
+ psmouse->pktcnt = 0;
+ if (psmouse->out_of_sync) {
+ psmouse->out_of_sync = 0;
+ printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
+ psmouse->name, psmouse->phys);
+ }
+ break;
+
+ case PSMOUSE_GOOD_DATA:
+ break;
+ }
+ return 0;
+}
+
+/*
+ * psmouse_interrupt() handles incoming characters, either passing them
+ * for normal processing or gathering them as command response.
*/

static irqreturn_t psmouse_interrupt(struct serio *serio,
unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct psmouse *psmouse = serio_get_drvdata(serio);
- psmouse_ret_t rc;

if (psmouse->state == PSMOUSE_IGNORE)
goto out;
@@ -208,67 +282,58 @@ static irqreturn_t psmouse_interrupt(str
if (ps2_handle_response(&psmouse->ps2dev, data))
goto out;

- if (psmouse->state == PSMOUSE_INITIALIZING)
+ if (psmouse->state <= PSMOUSE_RESYNCING)
goto out;

if (psmouse->state == PSMOUSE_ACTIVATED &&
psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
- printk(KERN_WARNING "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
+ printk(KERN_INFO "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
psmouse->name, psmouse->phys, psmouse->pktcnt);
- psmouse->pktcnt = 0;
+ psmouse->badbyte = psmouse->packet[0];
+ __psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
+ queue_work(kpsmoused_wq, &psmouse->resync_work);
+ goto out;
}

- psmouse->last = jiffies;
psmouse->packet[psmouse->pktcnt++] = data;
-
- if (psmouse->packet[0] == PSMOUSE_RET_BAT) {
+/*
+ * Check if this is a new device announcement (0xAA 0x00)
+ */
+ if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
if (psmouse->pktcnt == 1)
goto out;

- if (psmouse->pktcnt == 2) {
- if (psmouse->packet[1] == PSMOUSE_RET_ID) {
- psmouse->state = PSMOUSE_IGNORE;
- serio_reconnect(serio);
- goto out;
- }
- if (psmouse->type == PSMOUSE_SYNAPTICS) {
- /* neither 0xAA nor 0x00 are valid first bytes
- * for a packet in absolute mode
- */
- psmouse->pktcnt = 0;
- goto out;
- }
+ if (psmouse->packet[1] == PSMOUSE_RET_ID) {
+ __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ serio_reconnect(serio);
+ goto out;
}
- }
-
- rc = psmouse->protocol_handler(psmouse, regs);
+/*
+ * Not a new device, try processing first byte normally
+ */
+ psmouse->pktcnt = 1;
+ if (psmouse_handle_byte(psmouse, regs))
+ goto out;

- switch (rc) {
- case PSMOUSE_BAD_DATA:
- printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
- psmouse->name, psmouse->phys, psmouse->pktcnt);
- psmouse->pktcnt = 0;
+ psmouse->packet[psmouse->pktcnt++] = data;
+ }

- if (++psmouse->out_of_sync == psmouse->resetafter) {
- psmouse->state = PSMOUSE_IGNORE;
- printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
- serio_reconnect(psmouse->ps2dev.serio);
- }
- break;
+/*
+ * See if we need to force resync because mouse was idle for too long
+ */
+ if (psmouse->state == PSMOUSE_ACTIVATED &&
+ psmouse->pktcnt == 1 && psmouse->resync_time &&
+ time_after(jiffies, psmouse->last + psmouse->resync_time * HZ)) {
+ psmouse->badbyte = psmouse->packet[0];
+ __psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
+ queue_work(kpsmoused_wq, &psmouse->resync_work);
+ goto out;
+ }

- case PSMOUSE_FULL_PACKET:
- psmouse->pktcnt = 0;
- if (psmouse->out_of_sync) {
- psmouse->out_of_sync = 0;
- printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
- psmouse->name, psmouse->phys);
- }
- break;
+ psmouse->last = jiffies;
+ psmouse_handle_byte(psmouse, regs);

- case PSMOUSE_GOOD_DATA:
- break;
- }
-out:
+ out:
return IRQ_HANDLED;
}

@@ -752,21 +817,6 @@ static void psmouse_initialize(struct ps
}

/*
- * psmouse_set_state() sets new psmouse state and resets all flags and
- * counters while holding serio lock so fighting with interrupt handler
- * is not a concern.
- */
-
-static void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
-{
- serio_pause_rx(psmouse->ps2dev.serio);
- psmouse->state = new_state;
- psmouse->pktcnt = psmouse->out_of_sync = 0;
- psmouse->ps2dev.flags = 0;
- serio_continue_rx(psmouse->ps2dev.serio);
-}
-
-/*
* psmouse_activate() enables the mouse so that we get motion reports from it.
*/

@@ -794,6 +844,111 @@ static void psmouse_deactivate(struct ps
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
}

+/*
+ * psmouse_poll() - default poll hanlder. Everyone except for ALPS uses it.
+ */
+
+static int psmouse_poll(struct psmouse *psmouse)
+{
+ return ps2_command(&psmouse->ps2dev, psmouse->packet,
+ PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
+}
+
+
+/*
+ * psmouse_resync() attempts to re-validate current protocol.
+ */
+
+static void psmouse_resync(void *p)
+{
+ struct psmouse *psmouse = p, *parent = NULL;
+ struct serio *serio = psmouse->ps2dev.serio;
+ psmouse_ret_t rc = PSMOUSE_GOOD_DATA;
+ int failed = 0, enabled = 0;
+ int i;
+
+ down(&psmouse_sem);
+
+ if (psmouse->state != PSMOUSE_RESYNCING)
+ goto out;
+
+ if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
+ parent = serio_get_drvdata(serio->parent);
+ psmouse_deactivate(parent);
+ }
+
+/*
+ * Some mice don't ACK commands sent while they are in the middle of
+ * transmitting motion packet. To avoid delay we use ps2_sendbyte()
+ * instead of ps2_command() which would wait for 200ms for an ACK
+ * that may never come.
+ * As an additional quirk ALPS touchpads may not only forget to ACK
+ * disable command but will stop reporting taps, so if we see that
+ * mouse at least once ACKs disable we will do full reconnect if ACK
+ * is missing.
+ */
+ psmouse->num_resyncs++;
+
+ if (ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) {
+ if (psmouse->num_resyncs < 3 || psmouse->acks_disable_command)
+ failed = 1;
+ } else
+ psmouse->acks_disable_command = 1;
+
+/*
+ * Poll the mouse. If it was reset the packet will be shorter than
+ * psmouse->pktsize and ps2_command will fail. We do not expect and
+ * do not handle scenario when mouse "upgrades" its protocol while
+ * disconnected since it would require additional delay. If we ever
+ * see a mouse that does it we'll adjust the code.
+ */
+ if (!failed) {
+ if (psmouse->poll(psmouse))
+ failed = 1;
+ else {
+ psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
+ for (i = 0; i < psmouse->pktsize; i++) {
+ psmouse->pktcnt++;
+ rc = psmouse->protocol_handler(psmouse, NULL);
+ if (rc != PSMOUSE_GOOD_DATA)
+ break;
+ }
+ if (rc != PSMOUSE_FULL_PACKET)
+ failed = 1;
+ psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
+ }
+ }
+/*
+ * Now try to enable mouse. We try to do that even if poll failed and also
+ * repeat our attempts 5 times, otherwise we may be left out with disabled
+ * mouse.
+ */
+ for (i = 0; i < 5; i++) {
+ if (!ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
+ enabled = 1;
+ break;
+ }
+ msleep(200);
+ }
+
+ if (!enabled) {
+ printk(KERN_WARNING "psmouse.c: failed to re-enable mouse on %s\n",
+ psmouse->ps2dev.serio->phys);
+ failed = 1;
+ }
+
+ if (failed) {
+ psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ printk(KERN_INFO "psmouse.c: resync failed, issuing reconnect request\n");
+ serio_reconnect(serio);
+ } else
+ psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
+
+ if (parent)
+ psmouse_activate(parent);
+ out:
+ up(&psmouse_sem);
+}

/*
* psmouse_cleanup() resets the mouse into power-on state.
@@ -822,6 +977,11 @@ static void psmouse_disconnect(struct se

psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);

+ /* make sure we don't have a resync in progress */
+ up(&psmouse_sem);
+ flush_workqueue(kpsmoused_wq);
+ down(&psmouse_sem);
+
if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
parent = serio_get_drvdata(serio->parent);
psmouse_deactivate(parent);
@@ -859,6 +1019,7 @@ static int psmouse_switch_protocol(struc

psmouse->set_rate = psmouse_set_rate;
psmouse->set_resolution = psmouse_set_resolution;
+ psmouse->poll = psmouse_poll;
psmouse->protocol_handler = psmouse_process_byte;
psmouse->pktsize = 3;

@@ -874,6 +1035,23 @@ static int psmouse_switch_protocol(struc
else
psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, 1);

+ /*
+ * If mouse's packet size is 3 there is no point in polling the
+ * device in hopes to detect protocol reset - we won't get less
+ * than 3 bytes response anyhow.
+ */
+ if (psmouse->pktsize == 3)
+ psmouse->resync_time = 0;
+
+ /*
+ * Some smart KVMs fake response to POLL command returning just
+ * 3 bytes and messing up our resync logic, so if initial poll
+ * fails we won't try polling the device anymore. Hopefully
+ * such KVM will maintain initially selected protocol.
+ */
+ if (psmouse->resync_time && psmouse->poll(psmouse))
+ psmouse->resync_time = 0;
+
sprintf(psmouse->devname, "%s %s %s",
psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);

@@ -914,6 +1092,7 @@ static int psmouse_connect(struct serio
goto out;

ps2_init(&psmouse->ps2dev, serio);
+ INIT_WORK(&psmouse->resync_work, psmouse_resync, psmouse);
psmouse->dev = input_dev;
sprintf(psmouse->phys, "%s/input0", serio->phys);

@@ -934,6 +1113,7 @@ static int psmouse_connect(struct serio
psmouse->rate = psmouse_rate;
psmouse->resolution = psmouse_resolution;
psmouse->resetafter = psmouse_resetafter;
+ psmouse->resync_time = parent ? 0 : psmouse_resync_time;
psmouse->smartscroll = psmouse_smartscroll;

psmouse_switch_protocol(psmouse, NULL);
@@ -1278,13 +1458,21 @@ static int psmouse_get_maxproto(char *bu

static int __init psmouse_init(void)
{
+ kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
+ if (!kpsmoused_wq) {
+ printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n");
+ return -ENOMEM;
+ }
+
serio_register_driver(&psmouse_drv);
+
return 0;
}

static void __exit psmouse_exit(void)
{
serio_unregister_driver(&psmouse_drv);
+ destroy_workqueue(kpsmoused_wq);
}

module_init(psmouse_init);
Index: work/drivers/input/mouse/logips2pp.c
===================================================================
--- work.orig/drivers/input/mouse/logips2pp.c
+++ work/drivers/input/mouse/logips2pp.c
@@ -117,7 +117,7 @@ static int ps2pp_cmd(struct psmouse *psm
if (psmouse_sliced_command(psmouse, command))
return -1;

- if (ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_POLL))
+ if (ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_POLL | 0x0300))
return -1;

return 0;
Index: work/drivers/input/mouse/alps.c
===================================================================
--- work.orig/drivers/input/mouse/alps.c
+++ work/drivers/input/mouse/alps.c
@@ -348,6 +348,40 @@ static int alps_tap_mode(struct psmouse
return 0;
}

+/*
+ * alps_poll() - poll the touchpad for current motion packet.
+ * Used in resync.
+ */
+static int alps_poll(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ unsigned char buf[6];
+ int poll_failed;
+
+ if (priv->i->flags & ALPS_PASS)
+ alps_passthrough_mode(psmouse, 1);
+
+ poll_failed = ps2_command(&psmouse->ps2dev, buf,
+ PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
+
+ if (priv->i->flags & ALPS_PASS)
+ alps_passthrough_mode(psmouse, 0);
+
+ if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
+ return -1;
+
+ if ((psmouse->badbyte & 0xc8) == 0x08) {
+/*
+ * Poll the track stick ...
+ */
+ if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8)))
+ return -1;
+ }
+
+ memcpy(psmouse->packet, buf, sizeof(buf));
+ return 0;
+}
+
static int alps_reconnect(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -451,10 +485,14 @@ int alps_init(struct psmouse *psmouse)
input_register_device(priv->dev2);

psmouse->protocol_handler = alps_process_byte;
+ psmouse->poll = alps_poll;
psmouse->disconnect = alps_disconnect;
psmouse->reconnect = alps_reconnect;
psmouse->pktsize = 6;

+ /* We are having trouble resyncing ALPS touchpads so disable it for now */
+ psmouse->resync_time = 0;
+
return 0;

init_fail:
Index: work/drivers/input/mouse/synaptics.c
===================================================================
--- work.orig/drivers/input/mouse/synaptics.c
+++ work/drivers/input/mouse/synaptics.c
@@ -652,6 +652,8 @@ int synaptics_init(struct psmouse *psmou
psmouse->disconnect = synaptics_disconnect;
psmouse->reconnect = synaptics_reconnect;
psmouse->pktsize = 6;
+ /* Synaptics can usually stay in sync without extra help */
+ psmouse->resync_time = 0;

if (SYN_CAP_PASS_THROUGH(priv->capabilities))
synaptics_pt_create(psmouse);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2006-01-13 07:57    [W:0.079 / U:0.824 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site