lkml.org 
[lkml]   [2006]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 5/10] NTP: convert time_offset to nsec
From
Date
On Thu, 2005-12-22 at 00:24 +0100, Roman Zippel wrote:
> This converts time_offset into a scaled time_offset value. By scaling
> the value it avoids completely the compensation in second_overflow().
> Some calculations for the time_freq adjustments are now done using 64bit
> values, which allows a better resolution and makes the NTP4 conversion
> easier (the nsec resolution and increased time_constant range makes it
> hard to keep it 32bit values).
>
>
> Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
>
> ---
>
> arch/powerpc/kernel/time.c | 6 ++-
> include/linux/timex.h | 6 +--
> kernel/time.c | 34 +++++++++++++---------
> kernel/timer.c | 68 +++++++++++++++++++--------------------------
> 4 files changed, 58 insertions(+), 56 deletions(-)
>
> Index: linux-2.6-mm/arch/powerpc/kernel/time.c
> ===================================================================
> --- linux-2.6-mm.orig/arch/powerpc/kernel/time.c 2005-12-21 12:09:49.000000000 +0100
> +++ linux-2.6-mm/arch/powerpc/kernel/time.c 2005-12-21 12:12:08.000000000 +0100
> @@ -794,12 +794,14 @@ void ppc_adjtimex(void)
> */
> if ( time_offset < 0 ) {
> ltemp = -time_offset;
> - ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
> + ltemp <<= SHIFT_USEC - SHIFT_HZ;
> + ltemp = ltemp * HZ / 1000;
> ltemp >>= SHIFT_KG + time_constant;
> ltemp = -ltemp;
> } else {
> ltemp = time_offset;
> - ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
> + ltemp <<= SHIFT_USEC - SHIFT_HZ;
> + ltemp = ltemp * HZ / 1000;
> ltemp >>= SHIFT_KG + time_constant;
> }
>
> Index: linux-2.6-mm/include/linux/timex.h
> ===================================================================
> --- linux-2.6-mm.orig/include/linux/timex.h 2005-12-21 12:12:00.000000000 +0100
> +++ linux-2.6-mm/include/linux/timex.h 2005-12-21 12:12:08.000000000 +0100
> @@ -95,11 +95,11 @@
> #define SHIFT_USEC 16 /* frequency offset scale (shift) */
> #define FINENSEC (1L << SHIFT_SCALE) /* ~1 ns in phase units */
>
> -#define MAXPHASE 512000L /* max phase error (us) */
> +#define MAXPHASE 500000000L /* max phase error (ns) */
> #define MAXFREQ (512L << SHIFT_USEC) /* max frequency error (ppm) */
> #define MINSEC 16L /* min interval between updates (s) */
> #define MAXSEC 1200L /* max interval between updates (s) */
> -#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */
> +#define NTP_PHASE_LIMIT ((MAXPHASE / 1000) << 5) /* beyond max. dispersion */
>
> /*
> * syscall interface - used (mainly by NTP daemon)
> @@ -206,7 +206,7 @@ extern int tickadj; /* amount of adjus
> */
> extern int time_state; /* clock status */
> extern int time_status; /* clock synchronization status bits */
> -extern long time_offset; /* time adjustment (us) */
> +extern long time_offset; /* time adjustment (ns) */
> extern long time_constant; /* pll time constant */
> extern long time_tolerance; /* frequency tolerance (ppm) */
> extern long time_precision; /* clock precision (us) */
> Index: linux-2.6-mm/kernel/time.c
> ===================================================================
> --- linux-2.6-mm.orig/kernel/time.c 2005-12-21 12:12:04.000000000 +0100
> +++ linux-2.6-mm/kernel/time.c 2005-12-21 12:12:08.000000000 +0100
> @@ -212,6 +212,7 @@ void __attribute__ ((weak)) notify_arch_
> int do_adjtimex(struct timex *txc)
> {
> long ltemp, mtemp, save_adjust;
> + s64 freq_adj;
> int result;
>
> /* In order to modify anything, you gotta be super-user! */
> @@ -227,7 +228,8 @@ int do_adjtimex(struct timex *txc)
>
> if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
> /* adjustment Offset limited to +- .512 seconds */
> - if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
> + if (txc->offset <= -MAXPHASE / 1000 ||
> + txc->offset >= MAXPHASE / 1000)
> return -EINVAL;
>
> /* if the quartz is off by more than 10% something is VERY wrong ! */
> @@ -291,18 +293,18 @@ int do_adjtimex(struct timex *txc)
> time_adjust = 0;
> }
> else if (time_status & STA_PLL) {
> - ltemp = txc->offset;
> + ltemp = txc->offset * 1000;
>
> /*
> * Scale the phase adjustment and
> * clamp to the operating range.
> */
> if (ltemp > MAXPHASE)
> - time_offset = MAXPHASE << SHIFT_UPDATE;
> + time_offset = MAXPHASE;
> else if (ltemp < -MAXPHASE)
> - time_offset = -(MAXPHASE << SHIFT_UPDATE);
> + time_offset = -MAXPHASE;
> else
> - time_offset = ltemp << SHIFT_UPDATE;
> + time_offset = ltemp;

The above looks good to me.


> /*
> * Select whether the frequency is to be controlled
> @@ -316,15 +318,21 @@ int do_adjtimex(struct timex *txc)
> time_reftime = xtime.tv_sec;
> if (time_status & STA_FLL) {
> if (mtemp >= MINSEC) {
> - ltemp = (time_offset / mtemp) << (SHIFT_USEC -
> - SHIFT_UPDATE);
> - time_freq += shift_right(ltemp, SHIFT_KH);
> + if (time_offset < 0) {
> + freq_adj = (s64)-time_offset << SHIFT_USEC;
> + do_div(freq_adj, mtemp);
> + time_freq -= freq_adj >> SHIFT_KH;
> + } else {
> + freq_adj = (s64)time_offset << SHIFT_USEC;
> + do_div(freq_adj, mtemp);
> + time_freq += freq_adj >> SHIFT_KH;
> + }
> } else /* calibration interval too short (p. 12) */
> result = TIME_ERROR;
> } else { /* PLL mode */
> if (mtemp < MAXSEC) {
> - ltemp *= mtemp;
> - time_freq += shift_right(ltemp,(time_constant +
> + freq_adj = (s64)ltemp * mtemp;
> + time_freq += shift_right(freq_adj,(time_constant +
> time_constant +
> SHIFT_KF - SHIFT_USEC));
> } else /* calibration interval too long (p. 12) */

While you're there, mind changing mtemp to adjtime_interval or something
more clear? Probably something similar to ltemp as well.


> @@ -332,6 +340,7 @@ int do_adjtimex(struct timex *txc)
> }
> time_freq = min(time_freq, time_tolerance);
> time_freq = max(time_freq, -time_tolerance);
> + time_offset = (time_offset / HZ) << SHIFT_HZ;

time_offset has already been bounded and set. Mind commenting on what
this is doing?

> } /* STA_PLL */
> } /* txc->modes & ADJ_OFFSET */
> if (txc->modes & ADJ_TICK)
> @@ -345,9 +354,8 @@ leave: if ((time_status & (STA_UNSYNC|ST
>
> if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
> txc->offset = save_adjust;
> - else {
> - txc->offset = shift_right(time_offset, SHIFT_UPDATE);
> - }
> + else
> + txc->offset = shift_right(time_offset, SHIFT_HZ) * HZ / 1000;

I realize this is related to the last chunk, but do you mind clarifying
w/ a comment?


> txc->freq = time_freq;
> txc->maxerror = time_maxerror;
> txc->esterror = time_esterror;
> Index: linux-2.6-mm/kernel/timer.c
> ===================================================================
> --- linux-2.6-mm.orig/kernel/timer.c 2005-12-21 12:12:04.000000000 +0100
> +++ linux-2.6-mm/kernel/timer.c 2005-12-21 12:12:08.000000000 +0100
> @@ -577,7 +577,7 @@ int tickadj = 500/HZ ? : 1; /* microsec
> /* TIME_ERROR prevents overwriting the CMOS clock */
> int time_state = TIME_OK; /* clock synchronization status */
> int time_status = STA_UNSYNC; /* clock status bits */
> -long time_offset; /* time adjustment (us) */
> +long time_offset; /* time adjustment (ns) */
> long time_constant = 2; /* pll time constant */
> long time_tolerance = MAXFREQ; /* frequency tolerance (ppm) */
> long time_precision = 1; /* clock precision (us) */
> @@ -606,6 +606,7 @@ void ntp_clear(void)
>
> tick_nsec_curr = tick_nsec;
> time_adj_curr = time_adj;
> + time_offset = 0;
> }
>
> void ntp_update_frequency(void)
> @@ -646,7 +647,7 @@ void ntp_update_frequency(void)
> */
> static void second_overflow(void)
> {
> - long ltemp, adj;
> + long ltemp;


Again, might you choose something better then ltemp?


> /* Bump the maxerror field */
> time_maxerror += time_tolerance >> SHIFT_USEC;
> @@ -716,42 +717,33 @@ static void second_overflow(void)
> * adjustment for each second is clamped so as to spread the adjustment
> * over not more than the number of seconds between updates.
> */
> - ltemp = time_offset;
> - if (!(time_status & STA_FLL))
> - ltemp = shift_right(ltemp, SHIFT_KG + time_constant);
> - ltemp = min(ltemp, (MAXPHASE / MINSEC) << SHIFT_UPDATE);
> - ltemp = max(ltemp, -(MAXPHASE / MINSEC) << SHIFT_UPDATE);
> - time_offset -= ltemp;
> - adj = ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
> -
> - /*
> - * Compute the frequency estimate and additional phase adjustment due
> - * to frequency error for the next second.
> - */
> -
> -#if HZ == 100
> - /*
> - * Compensate for (HZ==100) != (1 << SHIFT_HZ). Add 25% and 3.125% to
> - * get 128.125; => only 0.125% error (p. 14)
> - */
> - adj += shift_right(adj, 2) + shift_right(adj, 5);
> -#endif
> -#if HZ == 250
> - /*
> - * Compensate for (HZ==250) != (1 << SHIFT_HZ). Add 1.5625% and
> - * 0.78125% to get 255.85938; => only 0.05% error (p. 14)
> - */
> - adj += shift_right(adj, 6) + shift_right(adj, 7);
> -#endif
> -#if HZ == 1000
> - /*
> - * Compensate for (HZ==1000) != (1 << SHIFT_HZ). Add 1.5625% and
> - * 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
> - */
> - adj += shift_right(adj, 6) + shift_right(adj, 7);
> -#endif
> - tick_nsec_curr += adj >> (SHIFT_SCALE - 10);
> - time_adj_curr += (adj << 10) & (FINENSEC - 1);
> + if (time_offset < 0) {
> + ltemp = -time_offset;
> + if (!(time_status & STA_FLL))
> + ltemp >>= SHIFT_KG + time_constant;
> + if (ltemp > (((MAXPHASE / HZ) << SHIFT_HZ) / MINSEC))
> + ltemp = ((MAXPHASE / HZ) << SHIFT_HZ) / MINSEC;
> + time_offset += ltemp;
> + tick_nsec_curr -= ltemp >> SHIFT_HZ;
> + time_adj_curr -= (ltemp << (SHIFT_SCALE - SHIFT_HZ)) & (FINENSEC - 1);
> + if (time_adj_curr < 0) {
> + tick_nsec_curr--;
> + time_adj_curr += FINENSEC;
> + }
> + } else {
> + ltemp = time_offset;
> + if (!(time_status & STA_FLL))
> + ltemp >>= SHIFT_KG + time_constant;
> + if (ltemp > (((MAXPHASE / HZ) << SHIFT_HZ) / MINSEC))
> + ltemp = ((MAXPHASE / HZ) << SHIFT_HZ) / MINSEC;
> + time_offset -= ltemp;
> + tick_nsec_curr += ltemp >> SHIFT_HZ;
> + time_adj_curr += (ltemp << (SHIFT_SCALE - SHIFT_HZ)) & (FINENSEC - 1);
> + if (time_adj_curr >= FINENSEC) {
> + tick_nsec_curr++;
> + time_adj_curr -= FINENSEC;
> + }
> + }

Again, more comments would help.

Also, these big "if negative, lot of coding adding else lots of code
subtracting" switches strike me as code duplication. It may not be as
efficient, but would you consider re-working this to save off the sign,
doing the math once and then applying the sign back? Parts of the above
already do this. See also the shift_right() macro.


thanks
-john


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-01-12 00:31    [W:0.383 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site