lkml.org 
[lkml]   [2005]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2.6.14-rc1 3/3] Add disk hotswap support to libata RESEND #3
RESEND #2!  Nobody should trust me with anything ever.  This ACTUALLY
fixes the patch so it... errrm... compiles. I really should never
have added comments. Or should have patched after adding comments.

Luke Kosewski

On 9/15/05, Lukasz Kosewski <lkosewsk@gmail.com> wrote:
> On 9/15/05, Lukasz Kosewski <lkosewsk@gmail.com> wrote:
> > Patch 3/3 for libata hotswapping. The sata_promise driver caught red
> > handed using the new hotswapping API. Depends on patches 1 and 2.
> > More comments in patch header.
> >
> > Luke Kosewski
>
> RESEND! Pulled out the broken comment. Thanks to Robin Johnson for
> pointing this out.
>
> Luke Kosewski
>
>
>
15.09.05 Luke Kosewski <lkosewsk@nit.ca>

* A patch to sata_promise.c (dependent on patches 1 and 2 in this
series) which makes it use the hotswap API in patch 2. The Promise
controllers are fairly simple in terms of their hotplug mechanism,
so none of the funky 'janitor' functions are used here.
ata_hotplug_plug is called on a plug event, and ata_hotplug_unplug on
an unplug. Simple, simple.
* Pending some confirmation and suggestions from Jim Ramsay
(jim.ramsay@gmail.com) the interrupt handler might change to check for
DMA commands completing as WELL as hotplug events in the same pass.

diff -rpuN linux-2.6.14-rc1/drivers/scsi/sata_promise.c linux-2.6.14-rc1-new/drivers/scsi/sata_promise.c
--- linux-2.6.14-rc1/drivers/scsi/sata_promise.c 2005-09-14 19:57:54.000000000 -0400
+++ linux-2.6.14-rc1-new/drivers/scsi/sata_promise.c 2005-09-14 20:16:09.000000000 -0400
@@ -332,10 +332,43 @@ static void pdc_reset_port(struct ata_po
readl(mmio); /* flush */
}

+/* Mask hotplug interrupts for one channel (ap) */
+static inline void pdc_disable_channel_hotplug_interrupts(struct ata_port *ap)
+{
+ struct pdc_host_priv *hp = ap->host_set->private_data;
+ void *mmio = ap->host_set->mmio_base + hp->hotplug_offset + 2;
+
+ u8 maskflags = readb(mmio);
+ maskflags |= (0x11 << (u8)ap->hard_port_no);
+ writeb(maskflags, mmio);
+}
+
+/* Clear and unmask hotplug interrupts for one channel (ap) */
+static inline void pdc_enable_channel_hotplug_interrupts(struct ata_port *ap)
+{
+ struct pdc_host_priv *hp = ap->host_set->private_data;
+ void *mmio = ap->host_set->mmio_base + hp->hotplug_offset;
+
+ //Clear channel hotplug interrupts
+ u8 maskflags = readb(mmio);
+ maskflags |= (0x11 << (u8)ap->hard_port_no);
+ writeb(maskflags, mmio);
+
+ //Unmask channel hotplug interrupts
+ maskflags = readb(mmio + 2);
+ maskflags &= ~(0x11 << (u8)ap->hard_port_no);
+ writeb(maskflags, mmio + 2);
+}
+
static void pdc_sata_phy_reset(struct ata_port *ap)
{
pdc_reset_port(ap);
- sata_phy_reset(ap);
+ if (ap->flags & ATA_FLAG_SATA_RESET) {
+ pdc_disable_channel_hotplug_interrupts(ap);
+ sata_phy_reset(ap);
+ pdc_enable_channel_hotplug_interrupts(ap);
+ } else
+ sata_phy_reset(ap);
}

static void pdc_pata_phy_reset(struct ata_port *ap)
@@ -485,11 +518,13 @@ static void pdc_irq_clear(struct ata_por
static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
+ struct pdc_host_priv *hp = host_set->private_data;
struct ata_port *ap;
u32 mask = 0;
unsigned int i, tmp;
- unsigned int handled = 0;
+ unsigned int handled = 0, hotplug_offset = hp->hotplug_offset;
void __iomem *mmio_base;
+ u8 plugdata, maskflags;

VPRINTK("ENTER\n");

@@ -513,7 +548,7 @@ static irqreturn_t pdc_interrupt (int ir
mask &= 0xffff; /* only 16 tags possible */
if (!mask) {
VPRINTK("QUICK EXIT 3\n");
- goto done_irq;
+ goto try_hotplug;
}

writel(mask, mmio_base + PDC_INT_SEQMASK);
@@ -532,7 +567,36 @@ static irqreturn_t pdc_interrupt (int ir
}
}

- VPRINTK("EXIT\n");
+ if (handled) {
+ VPRINTK("EXIT 4\n");
+ goto done_irq;
+ }
+
+try_hotplug:
+ plugdata = readb(mmio_base + hotplug_offset);
+ maskflags = readb(mmio_base + hotplug_offset + 2);
+ plugdata &= ~maskflags;
+ if (plugdata) {
+ writeb(plugdata, mmio_base + hotplug_offset);
+ for (i = 0; i < host_set->n_ports; ++i) {
+ ap = host_set->ports[i];
+ if (!(ap->flags & ATA_FLAG_SATA))
+ continue; //No PATA support here... yet
+ // Check unplug flag
+ if (plugdata & 0x1) {
+ /* Do stuff related to unplugging a device */
+ ata_hotplug_unplug(ap);
+ handled = 1;
+ } else if ((plugdata >> 4) & 0x1) { //Check plug flag
+ /* Do stuff related to plugging in a device */
+ ata_hotplug_plug(ap);
+ handled = 1;
+ }
+ plugdata >>= 1;
+ }
+ }
+
+ VPRINTK("EXIT 5\n");

done_irq:
spin_unlock(&host_set->lock);
@@ -632,9 +696,9 @@ static void pdc_host_init(unsigned int c
tmp = readl(mmio + hotplug_offset);
writel(tmp | 0xff, mmio + hotplug_offset);

- /* mask plug/unplug ints */
+ /* unmask plug/unplug ints */
tmp = readl(mmio + hotplug_offset);
- writel(tmp | 0xff0000, mmio + hotplug_offset);
+ writel(tmp & ~0xff0000, mmio + hotplug_offset);

/* reduce TBG clock to 133 Mhz. */
tmp = readl(mmio + PDC_TBG_MODE);
\
 
 \ /
  Last update: 2005-09-15 17:03    [W:0.161 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site