lkml.org 
[lkml]   [2005]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: libata sata_sil broken on 2.6.13.1
From
Date
On Iau, 2005-09-15 at 01:37 -0400, Jeff Garzik wrote:
> Silicon Image 311x throws interrupts after we told the hardware to
> disable interrupts, but only for a few certain devices and/or PATA
> bridges. I only have theories as to the solution.

Firstly some devices do not honour nIEN.
Secondly IRQ delivery is asynchronous to all other busses (especially on
older SMP boxes)

ata_interrupt checks qc->tf.ctl & ATA_NIEN

Other functions set/reset nIEN in the tf they issue then directly call
ata_tf_load/ata_exec_* so I don't believe qc->tf.ctl is the correct
thing to check for non-interrupt status on older type controllers at
least.

Instead you need to look at ap->last_ctl. But that too looks suspect if
any kind of reset sets it back to an undefined state.

Finally I don't see what locks viewing ->tf.ctl/->last_ctl against
whether it has yet been loaded into the hardware.

Alan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-15 15:04    [W:0.090 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site