lkml.org 
[lkml]   [2005]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectSymbios problems in recent -mm trees?
If you look on http://test.kernel.org/, you'll see in the rightmost
column there's a yellow box under elm3b70 for 2.6.13-rc4-mm1, but
current mainline kernels are all green (ie no problems). That means
one test failed, in this case making an fs on the spare partition.
Odd. I went digging ...

Looks like this got introduced between 2.6.12-mm1 and 2.6.12-mm2
Sorry, should've caught it earlier. I'll blame OLS or something.
This is an 8x power4 box running "bare metal" (ie not on top of
the hypervisor).

seems /dev/sdc1 doesn't exist.
07/31/05-02:44:32 processing command: (5) 'fs --partition=1 --mkext2fs --mount -l /mnt/tmp'
n format
PARTITION='/dev/sdc1'
mke2fs 1.35 (28-Feb-2004)
mkfs.ext2: No such device or address while trying to determine filesystem size
07/31/05-02:44:32 fs: creating filesystem ext2 Failed rc = 1

Looking back at the bootlog (http://test.kernel.org/9609/debug/console.log),
I see it really not looking very happy (snapshot below).

Good bootlog is here for comparsion:
(http://test.kernel.org/9445/debug/console.log)

sym0: <1010-66> rev 0x1 at pci 0001:01:01.0 irq 115
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.1
target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S25M
Type: Direct-Access ANSI SCSI revision: 03
target0:0:8: tagged command queuing enabled, command queue depth 16.
target0:0:8: Beginning Domain Validation
target0:0:8: asynchronous.
target0:0:8: wide asynchronous.
target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT IU QAS (12.5 ns, offset 31)
sym0: unexpected disconnect
target0:0:8: Write Buffer failure 700ff
target0:0:8: Domain Validation Disabing Information Units
target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
sym0: unexpected disconnect
target0:0:8: Write Buffer failure 700ff
target0:0:8: Domain Validation detected failure, dropping back
target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:8: Ending Domain Validation
target0:0:9: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S25M
Type: Direct-Access ANSI SCSI revision: 03
target0:0:9: tagged command queuing enabled, command queue depth 16.
target0:0:9: Beginning Domain Validation
target0:0:9: asynchronous.
target0:0:9: wide asynchronous.
target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT IU QAS (12.5 ns, offset 31)
sym0: unexpected disconnect
target0:0:9: Write Buffer failure 700ff
target0:0:9: Domain Validation Disabing Information Units
target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
sym0: unexpected disconnect
target0:0:9: Write Buffer failure 700ff
target0:0:9: Domain Validation detected failure, dropping back
target0:0:9: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:9: Ending Domain Validation
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
Vendor: IBM Model: IC35L036UCDY10-0 Rev: S25M
Type: Direct-Access ANSI SCSI revision: 03
target0:0:10: tagged command queuing enabled, command queue depth 16.
target0:0:10: Beginning Domain Validation
target0:0:10: asynchronous.
target0:0:10: wide asynchronous.
target0:0:10: Domain Validation skipping write tests
target0:0:10: FAST-80 WIDE SCSI 160.0 MB/s DT IU QAS (12.5 ns, offset 31)
sym0: unexpected disconnect
target0:0:10: Domain Validation Disabing Information Units
target0:0:10: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
sym0: unexpected disconnect
target0:0:10: Domain Validation detected failure, dropping back
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:10: Ending Domain Validation
Vendor: IBM Model: HSBPM2 PU2SCSI Rev: 0016
Type: Enclosure ANSI SCSI revision: 02
target0:0:14: Beginning Domain Validation
0:0:14:0: phase change 6-7 9@100503a8 resid=7.
0:0:14:0: phase change 6-7 9@100503a8 resid=7.
0:0:14:0: phase change 6-7 9@100503a8 resid=7.
0:0:14:0: phase change 6-7 9@100503a8 resid=7.
target0:0:14: Ending Domain Validation
Vendor: IBM Model: HSBPD4M PU3SCSI Rev: 0016
Type: Enclosure ANSI SCSI revision: 02
target0:0:15: Beginning Domain Validation
0:0:15:0: phase change 6-7 9@100503a8 resid=7.
0:0:15:0: phase change 6-7 9@100503a8 resid=7.
0:0:15:0: phase change 6-7 9@100503a8 resid=7.
0:0:15:0: phase change 6-7 9@100503a8 resid=7.
target0:0:15: Ending Domain Validation
sym1: <1010-66> rev 0x1 at pci 0001:01:01.1 irq 116
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.1
sym2: <1010-66> rev 0x1 at pci 0001:41:01.0 irq 119
sym2: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym2: SCSI BUS has been reset.
scsi2 : sym-2.2.1
sym3: <1010-66> rev 0x1 at pci 0001:41:01.1 irq 120
sym3: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym3: SCSI BUS has been reset.
scsi3 : sym-2.2.1
st: Version 20050501, fixed bufsize 32768, s/g segs 256
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Attached scsi disk sda at scsi0, channel 0, id 8, lun 0
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
sdc: Unit Not Ready, sense:
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
sdc : READ CAPACITY failed.
sdc : status=1, message=00, host=0, driver=08
sd: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
sdc: asking for cache data failed
sdc: assuming drive cache: write through
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
sdc: Unit Not Ready, sense:
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
sdc : READ CAPACITY failed.
sdc : status=1, message=00, host=0, driver=08
sd: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device not ready.
sdc: asking for cache data failed
sdc: assuming drive cache: write through
sdc:<6> target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device sdc not ready.
end_request: I/O error, dev sdc, sector 0
Buffer I/O error on device sdc, logical block 0
target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31)
Device sdc not ready.
end_request: I/O error, dev sdc, sector 0
Buffer I/O error on device sdc, logical block 0
unable to read partition table
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-05 08:19    [W:0.056 / U:1.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site