lkml.org 
[lkml]   [2005]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectFW: [Fwd: Re: [PATCH scsi-misc 2/2] megaraid_sas: LSI Logic MegaR AID SAS RA ID D river]
Date
> Looks pretty good to me.  Small issues I've identified:
>
> - what do you need the hba_count attribute for? This should be
> implementable in userspace pretty easily by iterating of all
> devices of the scsi_host class that are attached to the driver
> - the ->queuecommand cleanup patch I sent you a awhile ago doesn't
> seem to be applied
> - there's quite a lot of slightly odd formating, it would be nice
> if you could run the code through scripts/Lindent.
>
> If you could sent out an unmangled patch (even as attachment or on
> LSI's ftp side) I'd like to take another, closer look.

Contd. from prev mail

Patch 2 of 2
Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
-----------------------

diff -Naur scsi_misc-b/drivers/scsi/megaraid/megaraid_sas.c
scsi_misc-c/drivers/scsi/megaraid/megaraid_sas.c
--- scsi_misc-b/drivers/scsi/megaraid/megaraid_sas.c 1969-12-31
19:00:00.000000000 -0500
+++ scsi_misc-c/drivers/scsi/megaraid/megaraid_sas.c 2005-08-31
19:39:55.001126424 -0400
@@ -0,0 +1,2800 @@
+/*
+ *
+ * Linux MegaRAID driver for SAS based RAID controllers
+ *
+ * Copyright (c) 2003-2005 LSI Logic Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * FILE : megaraid_sas.c
+ * Version : v00.00.02.00-rc1
+ *
+ * Authors:
+ * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
+ * Sumant Patro <Sumant.Patro@lsil.com>
+ *
+ * List of supported controllers
+ *
+ * OEM Product Name VID DID SSVID SSID
+ * --- ------------ --- --- ---- ----
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/version.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/uio.h>
+#include <asm/uaccess.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include "megaraid_sas.h"
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MEGASAS_VERSION);
+MODULE_AUTHOR("sreenivas.bagalkote@lsil.com");
+MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver");
+
+/*
+ * PCI ID table for all supported controllers
+ */
+static struct pci_device_id megasas_pci_table[] = {
+
+ {
+ PCI_VENDOR_ID_LSI_LOGIC,
+ PCI_DEVICE_ID_LSI_SAS1064R,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ },
+ {
+ PCI_VENDOR_ID_DELL,
+ PCI_DEVICE_ID_DELL_PERC5,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ },
+ {0} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(pci, megasas_pci_table);
+
+static int megasas_mgmt_majorno;
+static struct megasas_mgmt_info megasas_mgmt_info;
+static struct fasync_struct *megasas_async_queue;
+static DECLARE_MUTEX(megasas_async_queue_mutex);
+
+/**
+ * megasas_get_cmd - Get a command from the free pool
+ * @instance: Adapter soft state
+ *
+ * Returns a free command from the pool
+ */
+static inline struct megasas_cmd *megasas_get_cmd(struct megasas_instance
+ *instance)
+{
+ unsigned long flags;
+ struct megasas_cmd *cmd = NULL;
+
+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
+
+ if (!list_empty(&instance->cmd_pool)) {
+ cmd = list_entry((&instance->cmd_pool)->next,
+ struct megasas_cmd, list);
+ list_del_init(&cmd->list);
+ } else {
+ printk(KERN_ERR "megasas: Command pool empty!\n");
+ }
+
+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
+ return cmd;
+}
+
+/**
+ * megasas_return_cmd - Return a cmd to free command pool
+ * @instance: Adapter soft state
+ * @cmd: Command packet to be returned to free command pool
+ */
+static inline void
+megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd
*cmd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
+
+ cmd->scmd = NULL;
+ list_add_tail(&cmd->list, &instance->cmd_pool);
+
+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
+}
+
+/**
+ * megasas_enable_intr - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr(struct megasas_register_set __iomem * regs)
+{
+ writel(1, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr - Disables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr(struct megasas_register_set __iomem * regs)
+{
+ u32 mask = readl(&regs->outbound_intr_mask) & (~0x00000001);
+ writel(mask, &regs->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_issue_polled - Issues a polling command
+ * @instance: Adapter soft state
+ * @cmd: Command packet to be issued
+ *
+ * For polling, MFI requires the cmd_status to be set to 0xFF before
posting.
+ */
+static int
+megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd
*cmd)
+{
+ int i;
+ u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
+
+ struct megasas_header *frame_hdr = &cmd->frame->hdr;
+
+ frame_hdr->cmd_status = 0xFF;
+ frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
+
+ /*
+ * Issue the frame using inbound queue port
+ */
+ writel(cmd->frame_phys_addr >> 3,
+ &instance->reg_set->inbound_queue_port);
+
+ /*
+ * Wait for cmd_status to change
+ */
+ for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) {
+ rmb();
+ msleep(1);
+ }
+
+ if (frame_hdr->cmd_status == 0xff)
+ return -ETIME;
+
+ return 0;
+}
+
+/**
+ * megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds
+ * @instance: Adapter soft state
+ * @cmd: Command to be issued
+ *
+ * This function waits on an event for the command to be returned from ISR.
+ * Used to issue ioctl commands.
+ */
+static int
+megasas_issue_blocked_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ cmd->cmd_status = ENODATA;
+
+ writel(cmd->frame_phys_addr >> 3,
+ &instance->reg_set->inbound_queue_port);
+
+ wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA));
+
+ return 0;
+}
+
+/**
+ * megasas_issue_blocked_abort_cmd - Aborts previously issued cmd
+ * @instance: Adapter soft state
+ * @cmd_to_abort: Previously issued cmd to be aborted
+ *
+ * MFI firmware can abort previously issued AEN comamnd (automatic event
+ * notification). The megasas_issue_blocked_abort_cmd() issues such abort
+ * cmd and blocks till it is completed.
+ */
+static int
+megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd_to_abort)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_abort_frame *abort_fr;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return -1;
+
+ abort_fr = &cmd->frame->abort;
+
+ /*
+ * Prepare and issue the abort frame
+ */
+ abort_fr->cmd = MFI_CMD_ABORT;
+ abort_fr->cmd_status = 0xFF;
+ abort_fr->flags = 0;
+ abort_fr->abort_context = cmd_to_abort->index;
+ abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr;
+ abort_fr->abort_mfi_phys_addr_hi = 0;
+
+ cmd->sync_cmd = 1;
+ cmd->cmd_status = 0xFF;
+
+ writel(cmd->frame_phys_addr >> 3,
+ &instance->reg_set->inbound_queue_port);
+
+ /*
+ * Wait for this cmd to complete
+ */
+ wait_event(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF));
+
+ megasas_return_cmd(instance, cmd);
+ return 0;
+}
+
+/**
+ * megasas_make_sgl32 - Prepares 32-bit SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements.
Otherwise,
+ * it returnes -1.
+ */
+static inline int
+megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd
*scp,
+ union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ /*
+ * Return 0 if there is no data transfer
+ */
+ if (!scp->request_buffer || !scp->request_bufflen)
+ return 0;
+
+ if (!scp->use_sg) {
+ mfi_sgl->sge32[0].phys_addr = pci_map_single(instance->pdev,
+ scp->
+ request_buffer,
+ scp->
+
request_bufflen,
+ scp->
+
sc_data_direction);
+ mfi_sgl->sge32[0].length = scp->request_bufflen;
+
+ return 1;
+ }
+
+ os_sgl = (struct scatterlist *)scp->request_buffer;
+ sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg,
+ scp->sc_data_direction);
+
+ for (i = 0; i < sge_count; i++, os_sgl++) {
+ mfi_sgl->sge32[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl);
+ }
+
+ return sge_count;
+}
+
+/**
+ * megasas_make_sgl64 - Prepares 64-bit SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements.
Otherwise,
+ * it returnes -1.
+ */
+static inline int
+megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd
*scp,
+ union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ /*
+ * Return 0 if there is no data transfer
+ */
+ if (!scp->request_buffer || !scp->request_bufflen)
+ return 0;
+
+ if (!scp->use_sg) {
+ mfi_sgl->sge64[0].phys_addr = pci_map_single(instance->pdev,
+ scp->
+ request_buffer,
+ scp->
+
request_bufflen,
+ scp->
+
sc_data_direction);
+
+ mfi_sgl->sge64[0].length = scp->request_bufflen;
+
+ return 1;
+ }
+
+ os_sgl = (struct scatterlist *)scp->request_buffer;
+ sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg,
+ scp->sc_data_direction);
+
+ for (i = 0; i < sge_count; i++, os_sgl++) {
+ mfi_sgl->sge64[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl);
+ }
+
+ return sge_count;
+}
+
+/**
+ * megasas_build_dcdb - Prepares a direct cdb (DCDB) command
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to be prepared in
+ *
+ * This function prepares CDB commands. These are typcially pass-through
+ * commands to the devices.
+ */
+static inline int
+megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd
*scp,
+ struct megasas_cmd *cmd)
+{
+ u32 sge_sz;
+ int sge_bytes;
+ u32 is_logical;
+ u32 device_id;
+ u16 flags = 0;
+ struct megasas_pthru_frame *pthru;
+
+ is_logical = MEGASAS_IS_LOGICAL(scp);
+ device_id = MEGASAS_DEV_INDEX(instance, scp);
+ pthru = (struct megasas_pthru_frame *)cmd->frame;
+
+ if (scp->sc_data_direction == PCI_DMA_TODEVICE)
+ flags = MFI_FRAME_DIR_WRITE;
+ else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ flags = MFI_FRAME_DIR_READ;
+ else if (scp->sc_data_direction == PCI_DMA_NONE)
+ flags = MFI_FRAME_DIR_NONE;
+
+ /*
+ * Prepare the DCDB frame
+ */
+ pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO;
+ pthru->cmd_status = 0x0;
+ pthru->scsi_status = 0x0;
+ pthru->target_id = device_id;
+ pthru->lun = scp->device->lun;
+ pthru->cdb_len = scp->cmd_len;
+ pthru->timeout = 0;
+ pthru->flags = flags;
+ pthru->data_xfer_len = scp->request_bufflen;
+
+ memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
+
+ /*
+ * Construct SGL
+ */
+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+ sizeof(struct megasas_sge32);
+
+ if (IS_DMA64) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl64(instance, scp,
+ &pthru->sgl);
+ } else
+ pthru->sge_count = megasas_make_sgl32(instance, scp,
+ &pthru->sgl);
+
+ /*
+ * Sense info specific
+ */
+ pthru->sense_len = SCSI_SENSE_BUFFERSIZE;
+ pthru->sense_buf_phys_addr_hi = 0;
+ pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
+
+ sge_bytes = sge_sz * pthru->sge_count;
+
+ /*
+ * Compute the total number of frames this command consumes. FW uses
+ * this number to pull sufficient number of frames from host memory.
+ */
+ cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
+ ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1;
+
+ if (cmd->frame_count > 7)
+ cmd->frame_count = 8;
+
+ return cmd->frame_count;
+}
+
+/**
+ * megasas_build_ldio - Prepares IOs to logical devices
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to to be prepared
+ *
+ * Frames (and accompanying SGLs) for regular SCSI IOs use this function.
+ */
+static inline int
+megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd
*scp,
+ struct megasas_cmd *cmd)
+{
+ u32 sge_sz;
+ int sge_bytes;
+ u32 device_id;
+ u8 sc = scp->cmnd[0];
+ u16 flags = 0;
+ struct megasas_io_frame *ldio;
+
+ device_id = MEGASAS_DEV_INDEX(instance, scp);
+ ldio = (struct megasas_io_frame *)cmd->frame;
+
+ if (scp->sc_data_direction == PCI_DMA_TODEVICE)
+ flags = MFI_FRAME_DIR_WRITE;
+ else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ flags = MFI_FRAME_DIR_READ;
+
+ /*
+ * Preare the Logical IO frame: 2nd bit is zero for all read cmds
+ */
+ ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
+ ldio->cmd_status = 0x0;
+ ldio->scsi_status = 0x0;
+ ldio->target_id = device_id;
+ ldio->timeout = 0;
+ ldio->reserved_0 = 0;
+ ldio->pad_0 = 0;
+ ldio->flags = flags;
+ ldio->start_lba_hi = 0;
+ ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0;
+
+ /*
+ * 6-byte READ(0x08) or WRITE(0x0A) cdb
+ */
+ if (scp->cmd_len == 6) {
+ ldio->lba_count = (u32) scp->cmnd[4];
+ ldio->start_lba_lo = ((u32) scp->cmnd[1] << 16) |
+ ((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
+
+ ldio->start_lba_lo &= 0x1FFFFF;
+ }
+
+ /*
+ * 10-byte READ(0x28) or WRITE(0x2A) cdb
+ */
+ else if (scp->cmd_len == 10) {
+ ldio->lba_count = (u32) scp->cmnd[8] |
+ ((u32) scp->cmnd[7] << 8);
+ ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ /*
+ * 12-byte READ(0xA8) or WRITE(0xAA) cdb
+ */
+ else if (scp->cmd_len == 12) {
+ ldio->lba_count = ((u32) scp->cmnd[6] << 24) |
+ ((u32) scp->cmnd[7] << 16) |
+ ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+
+ ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ /*
+ * 16-byte READ(0x88) or WRITE(0x8A) cdb
+ */
+ else if (scp->cmd_len == 16) {
+ ldio->lba_count = ((u32) scp->cmnd[10] << 24) |
+ ((u32) scp->cmnd[11] << 16) |
+ ((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
+
+ ldio->start_lba_lo = ((u32) scp->cmnd[6] << 24) |
+ ((u32) scp->cmnd[7] << 16) |
+ ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+
+ ldio->start_lba_hi = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+
+ }
+
+ /*
+ * Construct SGL
+ */
+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+ sizeof(struct megasas_sge32);
+
+ if (IS_DMA64) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl64(instance, scp,
&ldio->sgl);
+ } else
+ ldio->sge_count = megasas_make_sgl32(instance, scp,
&ldio->sgl);
+
+ /*
+ * Sense info specific
+ */
+ ldio->sense_len = SCSI_SENSE_BUFFERSIZE;
+ ldio->sense_buf_phys_addr_hi = 0;
+ ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
+
+ sge_bytes = sge_sz * ldio->sge_count;
+
+ cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
+ ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1;
+
+ if (cmd->frame_count > 7)
+ cmd->frame_count = 8;
+
+ return cmd->frame_count;
+}
+
+/**
+ * megasas_build_cmd - Prepares a command packet
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @frame_count: [OUT] Number of frames used to prepare this command
+ */
+static inline struct megasas_cmd *megasas_build_cmd(struct megasas_instance
+ *instance,
+ struct scsi_cmnd *scp,
+ int *frame_count)
+{
+ u32 logical_cmd;
+ struct megasas_cmd *cmd;
+
+ /*
+ * Find out if this is logical or physical drive command.
+ */
+ logical_cmd = MEGASAS_IS_LOGICAL(scp);
+
+ /*
+ * Logical drive command
+ */
+ if (logical_cmd) {
+
+ if (scp->device->id >= MEGASAS_MAX_LD) {
+ scp->result = DID_BAD_TARGET << 16;
+ return NULL;
+ }
+
+ switch (scp->cmnd[0]) {
+
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ case READ_16:
+ case WRITE_16:
+ /*
+ * Fail for LUN > 0
+ */
+ if (scp->device->lun) {
+ scp->result = DID_BAD_TARGET << 16;
+ return NULL;
+ }
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ scp->result = DID_IMM_RETRY << 16;
+ return NULL;
+ }
+
+ *frame_count = megasas_build_ldio(instance, scp,
cmd);
+
+ if (!(*frame_count)) {
+ megasas_return_cmd(instance, cmd);
+ return NULL;
+ }
+
+ return cmd;
+
+ default:
+ /*
+ * Fail for LUN > 0
+ */
+ if (scp->device->lun) {
+ scp->result = DID_BAD_TARGET << 16;
+ return NULL;
+ }
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ scp->result = DID_IMM_RETRY << 16;
+ return NULL;
+ }
+
+ *frame_count = megasas_build_dcdb(instance, scp,
cmd);
+
+ if (!(*frame_count)) {
+ megasas_return_cmd(instance, cmd);
+ return NULL;
+ }
+
+ return cmd;
+ }
+ } else {
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ scp->result = DID_IMM_RETRY << 16;
+ return NULL;
+ }
+
+ *frame_count = megasas_build_dcdb(instance, scp, cmd);
+
+ if (!(*frame_count)) {
+ megasas_return_cmd(instance, cmd);
+ return NULL;
+ }
+
+ return cmd;
+ }
+
+ return NULL;
+}
+
+/**
+ * megasas_queue_command - Queue entry point
+ * @scmd: SCSI command to be queued
+ * @done: Callback entry point
+ */
+static int
+megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct
scsi_cmnd *))
+{
+ u32 frame_count;
+ unsigned long flags;
+ struct megasas_cmd *cmd;
+ struct megasas_instance *instance;
+
+ instance = (struct megasas_instance *)
+ scmd->device->host->hostdata;
+ scmd->scsi_done = done;
+ scmd->result = 0;
+
+ cmd = megasas_build_cmd(instance, scmd, &frame_count);
+
+ if (!cmd) {
+ done(scmd);
+ return 0;
+ }
+
+ cmd->scmd = scmd;
+ scmd->SCp.ptr = (char *)cmd;
+ scmd->SCp.sent_command = jiffies;
+
+ /*
+ * Issue the command to the FW
+ */
+ spin_lock_irqsave(&instance->instance_lock, flags);
+ instance->fw_outstanding++;
+ spin_unlock_irqrestore(&instance->instance_lock, flags);
+
+ writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)),
+ &instance->reg_set->inbound_queue_port);
+
+ return 0;
+}
+
+/**
+ * megasas_wait_for_outstanding - Wait for all outstanding cmds
+ * @instance: Adapter soft state
+ *
+ * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to
+ * complete all its outstanding commands. Returns error if one or more IOs
+ * are pending after this time period. It also marks the controller dead.
+ */
+static int megasas_wait_for_outstanding(struct megasas_instance *instance)
+{
+ int i;
+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
+
+ for (i = 0; i < wait_time; i++) {
+
+ if (!instance->fw_outstanding)
+ break;
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: [%2d]waiting for %d "
+ "commands to complete\n", i,
+ instance->fw_outstanding);
+ }
+
+ msleep(1000);
+ }
+
+ if (instance->fw_outstanding) {
+ instance->hw_crit_error = 1;
+ return FAILED;
+ }
+
+ return SUCCESS;
+}
+
+/**
+ * megasas_generic_reset - Generic reset routine
+ * @scmd: Mid-layer SCSI command
+ *
+ * This routine implements a generic reset handler for device, bus and host
+ * reset requests. Device, bus and host specific reset handlers can use
this
+ * function after they do their specific tasks.
+ */
+static int megasas_generic_reset(struct scsi_cmnd *scmd)
+{
+ int ret_val;
+ struct megasas_instance *instance;
+
+ instance = (struct megasas_instance *)scmd->device->host->hostdata;
+
+ printk(KERN_NOTICE "megasas: RESET -%ld cmd=%x <c=%d t=%d l=%d>\n",
+ scmd->serial_number, scmd->cmnd[0], scmd->device->channel,
+ scmd->device->id, scmd->device->lun);
+
+ if (instance->hw_crit_error) {
+ printk(KERN_ERR "megasas: cannot recover from previous reset
"
+ "failures\n");
+ return FAILED;
+ }
+
+ spin_unlock(scmd->device->host->host_lock);
+
+ ret_val = megasas_wait_for_outstanding(instance);
+
+ if (ret_val == SUCCESS)
+ printk(KERN_NOTICE "megasas: reset successful \n");
+ else
+ printk(KERN_ERR "megasas: failed to do reset\n");
+
+ spin_lock(scmd->device->host->host_lock);
+
+ return ret_val;
+}
+
+static enum scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd
*scmd)
+{
+ unsigned long seconds;
+
+ if (scmd->SCp.ptr) {
+ seconds = (jiffies - scmd->SCp.sent_command) / HZ;
+
+ if (seconds < 90) {
+ return EH_RESET_TIMER;
+ } else {
+ return EH_NOT_HANDLED;
+ }
+ }
+
+ return EH_HANDLED;
+}
+
+/**
+ * megasas_reset_device - Device reset handler entry point
+ */
+static int megasas_reset_device(struct scsi_cmnd *scmd)
+{
+ int ret;
+
+ /*
+ * First wait for all commands to complete
+ */
+ ret = megasas_generic_reset(scmd);
+
+ return ret;
+}
+
+/**
+ * megasas_reset_bus_host - Bus & host reset handler entry point
+ */
+static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
+{
+ int ret;
+
+ /*
+ * Frist wait for all commands to complete
+ */
+ ret = megasas_generic_reset(scmd);
+
+ return ret;
+}
+
+/**
+ * megasas_service_aen - Processes an event notification
+ * @instance: Adapter soft state
+ * @cmd: AEN command completed by the ISR
+ *
+ * For AEN, driver sends a command down to FW that is held by the FW till
an
+ * event occurs. When an event of interest occurs, FW completes the command
+ * that it was previously holding.
+ *
+ * This routines sends SIGIO signal to processes that have registered with
the
+ * driver for AEN.
+ */
+static void
+megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd
*cmd)
+{
+ /*
+ * Don't signal app if it is just an aborted previously registered
aen
+ */
+ if (!cmd->abort_aen)
+ kill_fasync(&megasas_async_queue, SIGIO, POLL_IN);
+ else
+ cmd->abort_aen = 0;
+
+ instance->aen_cmd = NULL;
+ megasas_return_cmd(instance, cmd);
+}
+
+/*
+ * Scsi host template for megaraid_sas driver
+ */
+static struct scsi_host_template megasas_template = {
+
+ .module = THIS_MODULE,
+ .name = "LSI Logic SAS based MegaRAID driver",
+ .proc_name = "megaraid_sas",
+ .queuecommand = megasas_queue_command,
+ .eh_device_reset_handler = megasas_reset_device,
+ .eh_bus_reset_handler = megasas_reset_bus_host,
+ .eh_host_reset_handler = megasas_reset_bus_host,
+ .eh_timed_out = megasas_reset_timer,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+/**
+ * megasas_complete_int_cmd - Completes an internal command
+ * @instance: Adapter soft state
+ * @cmd: Command to be completed
+ *
+ * The megasas_issue_blocked_cmd() function waits for a command to complete
+ * after it issues a command. This function wakes up that waiting routine
by
+ * calling wake_up() on the wait queue.
+ */
+static void
+megasas_complete_int_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ cmd->cmd_status = cmd->frame->io.cmd_status;
+
+ if (cmd->cmd_status == ENODATA) {
+ cmd->cmd_status = 0;
+ }
+ wake_up(&instance->int_cmd_wait_q);
+}
+
+/**
+ * megasas_complete_abort - Completes aborting a command
+ * @instance: Adapter soft state
+ * @cmd: Cmd that was issued to abort another cmd
+ *
+ * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
+ * after it issues an abort on a previously issued command. This function
+ * wakes up all functions waiting on the same wait queue.
+ */
+static void
+megasas_complete_abort(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ if (cmd->sync_cmd) {
+ cmd->sync_cmd = 0;
+ cmd->cmd_status = 0;
+ wake_up(&instance->abort_cmd_wait_q);
+ }
+
+ return;
+}
+
+/**
+ * megasas_unmap_sgbuf - Unmap SG buffers
+ * @instance: Adapter soft state
+ * @cmd: Completed command
+ */
+static inline void
+megasas_unmap_sgbuf(struct megasas_instance *instance, struct megasas_cmd
*cmd)
+{
+ dma_addr_t buf_h;
+ u8 opcode;
+
+ if (cmd->scmd->use_sg) {
+ pci_unmap_sg(instance->pdev, cmd->scmd->request_buffer,
+ cmd->scmd->use_sg,
cmd->scmd->sc_data_direction);
+ return;
+ }
+
+ if (!cmd->scmd->request_bufflen)
+ return;
+
+ opcode = cmd->frame->hdr.cmd;
+
+ if ((opcode == MFI_CMD_LD_READ) || (opcode == MFI_CMD_LD_WRITE)) {
+ if (IS_DMA64)
+ buf_h = cmd->frame->io.sgl.sge64[0].phys_addr;
+ else
+ buf_h = cmd->frame->io.sgl.sge32[0].phys_addr;
+ } else {
+ if (IS_DMA64)
+ buf_h = cmd->frame->pthru.sgl.sge64[0].phys_addr;
+ else
+ buf_h = cmd->frame->pthru.sgl.sge32[0].phys_addr;
+ }
+
+ pci_unmap_single(instance->pdev, buf_h, cmd->scmd->request_bufflen,
+ cmd->scmd->sc_data_direction);
+ return;
+}
+
+/**
+ * megasas_complete_cmd - Completes a command
+ * @instance: Adapter soft state
+ * @cmd: Command to be completed
+ * @alt_status: If non-zero, use this value as
status to
+ * SCSI mid-layer instead of the value returned
+ * by the FW. This should be used if caller
wants
+ * an alternate status (as in the case of
aborted
+ * commands)
+ */
+static inline void
+megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd
*cmd,
+ u8 alt_status)
+{
+ int exception = 0;
+ struct megasas_header *hdr = &cmd->frame->hdr;
+ unsigned long flags;
+
+ if (cmd->scmd) {
+ cmd->scmd->SCp.ptr = (char *)0;
+ }
+
+ switch (hdr->cmd) {
+
+ case MFI_CMD_PD_SCSI_IO:
+ case MFI_CMD_LD_SCSI_IO:
+
+ /*
+ * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been
+ * issued either through an IO path or an IOCTL path. If it
+ * was via IOCTL, we will send it to internal completion.
+ */
+ if (cmd->sync_cmd) {
+ cmd->sync_cmd = 0;
+ megasas_complete_int_cmd(instance, cmd);
+ break;
+ }
+
+ /*
+ * Don't export physical disk devices to mid-layer.
+ */
+ if (!MEGASAS_IS_LOGICAL(cmd->scmd) &&
+ (hdr->cmd_status == MFI_STAT_OK) &&
+ (cmd->scmd->cmnd[0] == INQUIRY)) {
+
+ if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) ==
+ TYPE_DISK) {
+ cmd->scmd->result = DID_BAD_TARGET << 16;
+ exception = 1;
+ }
+ }
+
+ case MFI_CMD_LD_READ:
+ case MFI_CMD_LD_WRITE:
+
+ if (alt_status) {
+ cmd->scmd->result = alt_status << 16;
+ exception = 1;
+ }
+
+ if (exception) {
+
+ spin_lock_irqsave(&instance->instance_lock, flags);
+ instance->fw_outstanding--;
+ spin_unlock_irqrestore(&instance->instance_lock,
flags);
+
+ megasas_unmap_sgbuf(instance, cmd);
+ cmd->scmd->scsi_done(cmd->scmd);
+ megasas_return_cmd(instance, cmd);
+
+ break;
+ }
+
+ switch (hdr->cmd_status) {
+
+ case MFI_STAT_OK:
+ cmd->scmd->result = DID_OK << 16;
+ break;
+
+ case MFI_STAT_SCSI_IO_FAILED:
+ case MFI_STAT_LD_INIT_IN_PROGRESS:
+ cmd->scmd->result =
+ (DID_ERROR << 16) | hdr->scsi_status;
+ break;
+
+ case MFI_STAT_SCSI_DONE_WITH_ERROR:
+
+ cmd->scmd->result = (DID_OK << 16) |
hdr->scsi_status;
+
+ if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) {
+ memset(cmd->scmd->sense_buffer, 0,
+ SCSI_SENSE_BUFFERSIZE);
+ memcpy(cmd->scmd->sense_buffer, cmd->sense,
+ hdr->sense_len);
+
+ cmd->scmd->result |= DRIVER_SENSE << 24;
+ }
+
+ break;
+
+ case MFI_STAT_LD_OFFLINE:
+ case MFI_STAT_DEVICE_NOT_FOUND:
+ cmd->scmd->result = DID_BAD_TARGET << 16;
+ break;
+
+ default:
+ printk(KERN_DEBUG "megasas: MFI FW status %#x\n",
+ hdr->cmd_status);
+ cmd->scmd->result = DID_ERROR << 16;
+ break;
+ }
+
+ spin_lock_irqsave(&instance->instance_lock, flags);
+ instance->fw_outstanding--;
+ spin_unlock_irqrestore(&instance->instance_lock, flags);
+
+ megasas_unmap_sgbuf(instance, cmd);
+ cmd->scmd->scsi_done(cmd->scmd);
+ megasas_return_cmd(instance, cmd);
+
+ break;
+
+ case MFI_CMD_SMP:
+ case MFI_CMD_STP:
+ case MFI_CMD_DCMD:
+
+ /*
+ * See if got an event notification
+ */
+ if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT)
+ megasas_service_aen(instance, cmd);
+ else
+ megasas_complete_int_cmd(instance, cmd);
+
+ break;
+
+ case MFI_CMD_ABORT:
+ /*
+ * Cmd issued to abort another cmd returned
+ */
+ megasas_complete_abort(instance, cmd);
+ break;
+
+ default:
+ printk("megasas: Unknown command completed! [0x%X]\n",
+ hdr->cmd);
+ break;
+ }
+}
+
+/**
+ * megasas_deplete_reply_queue - Processes all completed commands
+ * @instance: Adapter soft state
+ * @alt_status: Alternate status to be
returned to
+ * SCSI mid-layer instead of the status
+ * returned by the FW
+ */
+static inline int
+megasas_deplete_reply_queue(struct megasas_instance *instance, u8
alt_status)
+{
+ u32 status;
+ u32 producer;
+ u32 consumer;
+ u32 context;
+ struct megasas_cmd *cmd;
+
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(&instance->reg_set->outbound_intr_status);
+
+ if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ return IRQ_NONE;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, &instance->reg_set->outbound_intr_status);
+
+ producer = *instance->producer;
+ consumer = *instance->consumer;
+
+ while (consumer != producer) {
+ context = instance->reply_queue[consumer];
+
+ cmd = instance->cmd_list[context];
+
+ megasas_complete_cmd(instance, cmd, alt_status);
+
+ consumer++;
+ if (consumer == (instance->max_fw_cmds + 1)) {
+ consumer = 0;
+ }
+ }
+
+ *instance->consumer = producer;
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * megasas_isr - isr entry point
+ */
+static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs)
+{
+ return megasas_deplete_reply_queue((struct megasas_instance *)devp,
+ DID_OK);
+}
+
+/**
+ * megasas_transition_to_ready - Move the FW to READY state
+ * @reg_set: MFI register set
+ *
+ * During the initialization, FW passes can potentially be in any one of
+ * several possible states. If the FW in operational, waiting-for-handshake
+ * states, driver must take steps to bring it to ready state. Otherwise, it
+ * has to wait for the ready state.
+ */
+static int
+megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
+{
+ int i;
+ u8 max_wait;
+ u32 fw_state;
+ u32 cur_state;
+
+ fw_state = readl(&reg_set->outbound_msg_0) & MFI_STATE_MASK;
+
+ while (fw_state != MFI_STATE_READY) {
+
+ printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+ " state\n");
+ switch (fw_state) {
+
+ case MFI_STATE_FAULT:
+
+ printk(KERN_DEBUG "megasas: FW in FAULT state!!\n");
+ return -ENODEV;
+
+ case MFI_STATE_WAIT_HANDSHAKE:
+ /*
+ * Set the CLR bit in inbound doorbell
+ */
+ writel(MFI_INIT_CLEAR_HANDSHAKE,
+ &reg_set->inbound_doorbell);
+
+ max_wait = 2;
+ cur_state = MFI_STATE_WAIT_HANDSHAKE;
+ break;
+
+ case MFI_STATE_OPERATIONAL:
+ /*
+ * Bring it to READY state; assuming max wait 2 secs
+ */
+ megasas_disable_intr(reg_set);
+ writel(MFI_INIT_READY, &reg_set->inbound_doorbell);
+
+ max_wait = 10;
+ cur_state = MFI_STATE_OPERATIONAL;
+ break;
+
+ case MFI_STATE_UNDEFINED:
+ /*
+ * This state should not last for more than 2
seconds
+ */
+ max_wait = 2;
+ cur_state = MFI_STATE_UNDEFINED;
+ break;
+
+ case MFI_STATE_BB_INIT:
+ max_wait = 2;
+ cur_state = MFI_STATE_BB_INIT;
+ break;
+
+ case MFI_STATE_FW_INIT:
+ max_wait = 20;
+ cur_state = MFI_STATE_FW_INIT;
+ break;
+
+ case MFI_STATE_FW_INIT_2:
+ max_wait = 20;
+ cur_state = MFI_STATE_FW_INIT_2;
+ break;
+
+ case MFI_STATE_DEVICE_SCAN:
+ max_wait = 20;
+ cur_state = MFI_STATE_DEVICE_SCAN;
+ break;
+
+ case MFI_STATE_FLUSH_CACHE:
+ max_wait = 20;
+ cur_state = MFI_STATE_FLUSH_CACHE;
+ break;
+
+ default:
+ printk(KERN_DEBUG "megasas: Unknown state 0x%x\n",
+ fw_state);
+ return -ENODEV;
+ }
+
+ /*
+ * The cur_state should not last for more than max_wait secs
+ */
+ for (i = 0; i < (max_wait * 1000); i++) {
+ fw_state = MFI_STATE_MASK &
+ readl(&reg_set->outbound_msg_0);
+
+ if (fw_state == cur_state) {
+ msleep(1);
+ } else
+ break;
+ }
+
+ /*
+ * Return error if fw_state hasn't changed after max_wait
+ */
+ if (fw_state == cur_state) {
+ printk(KERN_DEBUG "FW state [%d] hasn't changed "
+ "in %d secs\n", fw_state, max_wait);
+ return -ENODEV;
+ }
+ };
+
+ return 0;
+}
+
+/**
+ * megasas_teardown_frame_pool - Destroy the cmd frame DMA pool
+ * @instance: Adapter soft state
+ */
+static void megasas_teardown_frame_pool(struct megasas_instance *instance)
+{
+ int i;
+ u32 max_cmd = instance->max_fw_cmds;
+ struct megasas_cmd *cmd;
+
+ if (!instance->frame_dma_pool)
+ return;
+
+ /*
+ * Return all frames to pool
+ */
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = instance->cmd_list[i];
+
+ if (cmd->frame)
+ pci_pool_free(instance->frame_dma_pool, cmd->frame,
+ cmd->frame_phys_addr);
+
+ if (cmd->sense)
+ pci_pool_free(instance->sense_dma_pool, cmd->frame,
+ cmd->sense_phys_addr);
+ }
+
+ /*
+ * Now destroy the pool itself
+ */
+ pci_pool_destroy(instance->frame_dma_pool);
+ pci_pool_destroy(instance->sense_dma_pool);
+
+ instance->frame_dma_pool = NULL;
+ instance->sense_dma_pool = NULL;
+}
+
+/**
+ * megasas_create_frame_pool - Creates DMA pool for cmd frames
+ * @instance: Adapter soft state
+ *
+ * Each command packet has an embedded DMA memory buffer that is used for
+ * filling MFI frame and the SG list that immediately follows the frame.
This
+ * function creates those DMA memory buffers for each command packet by
using
+ * PCI pool facility.
+ */
+static int megasas_create_frame_pool(struct megasas_instance *instance)
+{
+ int i;
+ u32 max_cmd;
+ u32 sge_sz;
+ u32 sgl_sz;
+ u32 total_sz;
+ u32 frame_count;
+ struct megasas_cmd *cmd;
+
+ max_cmd = instance->max_fw_cmds;
+
+ /*
+ * Size of our frame is 64 bytes for MFI frame, followed by max SG
+ * elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer
+ */
+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+ sizeof(struct megasas_sge32);
+
+ /*
+ * Calculated the number of 64byte frames required for SGL
+ */
+ sgl_sz = sge_sz * instance->max_num_sge;
+ frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) /
MEGAMFI_FRAME_SIZE;
+
+ /*
+ * We need one extra frame for the MFI command
+ */
+ frame_count++;
+
+ total_sz = MEGAMFI_FRAME_SIZE * frame_count;
+ /*
+ * Use DMA pool facility provided by PCI layer
+ */
+ instance->frame_dma_pool = pci_pool_create("megasas frame pool",
+ instance->pdev, total_sz,
64,
+ 0);
+
+ if (!instance->frame_dma_pool) {
+ printk(KERN_DEBUG "megasas: failed to setup frame pool\n");
+ return -ENOMEM;
+ }
+
+ instance->sense_dma_pool = pci_pool_create("megasas sense pool",
+ instance->pdev, 128, 4,
0);
+
+ if (!instance->sense_dma_pool) {
+ printk(KERN_DEBUG "megasas: failed to setup sense pool\n");
+
+ pci_pool_destroy(instance->frame_dma_pool);
+ instance->frame_dma_pool = NULL;
+
+ return -ENOMEM;
+ }
+
+ /*
+ * Allocate and attach a frame to each of the commands in cmd_list.
+ * By making cmd->index as the context instead of the &cmd, we can
+ * always use 32bit context regardless of the architecture
+ */
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = instance->cmd_list[i];
+
+ cmd->frame = pci_pool_alloc(instance->frame_dma_pool,
+ GFP_KERNEL,
&cmd->frame_phys_addr);
+
+ cmd->sense = pci_pool_alloc(instance->sense_dma_pool,
+ GFP_KERNEL,
&cmd->sense_phys_addr);
+
+ /*
+ * megasas_teardown_frame_pool() takes care of freeing
+ * whatever has been allocated
+ */
+ if (!cmd->frame || !cmd->sense) {
+ printk(KERN_DEBUG "megasas: pci_pool_alloc failed
\n");
+ megasas_teardown_frame_pool(instance);
+ return -ENOMEM;
+ }
+
+ cmd->frame->io.context = cmd->index;
+ }
+
+ return 0;
+}
+
+/**
+ * megasas_free_cmds - Free all the cmds in the free cmd pool
+ * @instance: Adapter soft state
+ */
+static void megasas_free_cmds(struct megasas_instance *instance)
+{
+ int i;
+ /* First free the MFI frame pool */
+ megasas_teardown_frame_pool(instance);
+
+ /* Free all the commands in the cmd_list */
+ for (i = 0; i < instance->max_fw_cmds; i++)
+ kfree(instance->cmd_list[i]);
+
+ /* Free the cmd_list buffer itself */
+ kfree(instance->cmd_list);
+ instance->cmd_list = NULL;
+
+ INIT_LIST_HEAD(&instance->cmd_pool);
+}
+
+/**
+ * megasas_alloc_cmds - Allocates the command packets
+ * @instance: Adapter soft state
+ *
+ * Each command that is issued to the FW, whether IO commands from the OS
or
+ * internal commands like IOCTLs, are wrapped in local data structure
called
+ * megasas_cmd. The frame embedded in this megasas_cmd is actually issued
to
+ * the FW.
+ *
+ * Each frame has a 32-bit field called context (tag). This context is used
+ * to get back the megasas_cmd from the frame when a frame gets completed
in
+ * the ISR. Typically the address of the megasas_cmd itself would be used
as
+ * the context. But we wanted to keep the differences between 32 and 64 bit
+ * systems to the mininum. We always use 32 bit integers for the context.
In
+ * this driver, the 32 bit values are the indices into an array cmd_list.
+ * This array is used only to look up the megasas_cmd given the context.
The
+ * free commands themselves are maintained in a linked list called
cmd_pool.
+ */
+static int megasas_alloc_cmds(struct megasas_instance *instance)
+{
+ int i;
+ int j;
+ u32 max_cmd;
+ struct megasas_cmd *cmd;
+
+ max_cmd = instance->max_fw_cmds;
+
+ /*
+ * instance->cmd_list is an array of struct megasas_cmd pointers.
+ * Allocate the dynamic array first and then allocate individual
+ * commands.
+ */
+ instance->cmd_list = kmalloc(sizeof(struct megasas_cmd *) * max_cmd,
+ GFP_KERNEL);
+
+ if (!instance->cmd_list) {
+ printk(KERN_DEBUG "megasas: out of memory\n");
+ return -ENOMEM;
+ }
+
+ memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) *
max_cmd);
+
+ for (i = 0; i < max_cmd; i++) {
+ instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
+ GFP_KERNEL);
+
+ if (!instance->cmd_list[i]) {
+
+ for (j = 0; j < i; j++)
+ kfree(instance->cmd_list[j]);
+
+ kfree(instance->cmd_list);
+ instance->cmd_list = NULL;
+
+ return -ENOMEM;
+ }
+ }
+
+ /*
+ * Add all the commands to command pool (instance->cmd_pool)
+ */
+ for (i = 0; i < max_cmd; i++) {
+ cmd = instance->cmd_list[i];
+ memset(cmd, 0, sizeof(struct megasas_cmd));
+ cmd->index = i;
+ cmd->instance = instance;
+
+ list_add_tail(&cmd->list, &instance->cmd_pool);
+ }
+
+ /*
+ * Create a frame pool and assign one frame to each cmd
+ */
+ if (megasas_create_frame_pool(instance)) {
+ printk(KERN_DEBUG "megasas: Error creating frame DMA
pool\n");
+ megasas_free_cmds(instance);
+ }
+
+ return 0;
+}
+
+/**
+ * megasas_get_controller_info - Returns FW's controller structure
+ * @instance: Adapter soft state
+ * @ctrl_info: Controller information structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller structure.
+ * This information is mainly used to find out the maximum IO transfer per
+ * command supported by the FW.
+ */
+static int
+megasas_get_ctrl_info(struct megasas_instance *instance,
+ struct megasas_ctrl_info *ctrl_info)
+{
+ int ret = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct megasas_ctrl_info *ci;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas: Failed to get a free cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ sizeof(struct megasas_ctrl_info), &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem for ctrl info\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct megasas_ctrl_info);
+ dcmd->opcode = MR_DCMD_CTRL_GET_INFO;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct megasas_ctrl_info);
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
+ } else {
+ ret = -1;
+ }
+
+ pci_free_consistent(instance->pdev, sizeof(struct
megasas_ctrl_info),
+ ci, ci_h);
+
+ megasas_return_cmd(instance, cmd);
+ return ret;
+}
+
+/**
+ * megasas_init_mfi - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * This is the main function for initializing MFI firmware.
+ */
+static int megasas_init_mfi(struct megasas_instance *instance)
+{
+ u32 context_sz;
+ u32 reply_q_sz;
+ u32 max_sectors_1;
+ u32 max_sectors_2;
+ struct megasas_register_set __iomem *reg_set;
+
+ struct megasas_cmd *cmd;
+ struct megasas_ctrl_info *ctrl_info;
+
+ struct megasas_init_frame *init_frame;
+ struct megasas_init_queue_info *initq_info;
+ dma_addr_t init_frame_h;
+ dma_addr_t initq_info_h;
+
+ /*
+ * Map the message registers
+ */
+ instance->base_addr = pci_resource_start(instance->pdev, 0);
+
+ if (pci_request_regions(instance->pdev, "megasas: LSI Logic")) {
+ printk(KERN_DEBUG "megasas: IO memory region busy!\n");
+ return -EBUSY;
+ }
+
+ instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
+
+ if (!instance->reg_set) {
+ printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
+ goto fail_ioremap;
+ }
+
+ reg_set = instance->reg_set;
+
+ /*
+ * We expect the FW state to be READY
+ */
+ if (megasas_transition_to_ready(instance->reg_set))
+ goto fail_ready_state;
+
+ /*
+ * Get various operational parameters from status register
+ */
+ instance->max_fw_cmds = readl(&reg_set->outbound_msg_0) & 0x00FFFF;
+ instance->max_num_sge = (readl(&reg_set->outbound_msg_0) & 0xFF0000)
+ 0x10;
+ /*
+ * Create a pool of commands
+ */
+ if (megasas_alloc_cmds(instance))
+ goto fail_alloc_cmds;
+
+ /*
+ * Allocate memory for reply queue. Length of reply queue should
+ * be _one_ more than the maximum commands handled by the firmware.
+ *
+ * Note: When FW completes commands, it places corresponding contex
+ * values in this circular reply queue. This circular queue is a
fairly
+ * typical producer-consumer queue. FW is the producer (of completed
+ * commands) and the driver is the consumer.
+ */
+ context_sz = sizeof(u32);
+ reply_q_sz = context_sz * (instance->max_fw_cmds + 1);
+
+ instance->reply_queue = pci_alloc_consistent(instance->pdev,
+ reply_q_sz,
+
&instance->reply_queue_h);
+
+ if (!instance->reply_queue) {
+ printk(KERN_DEBUG "megasas: Out of DMA mem for reply
queue\n");
+ goto fail_reply_queue;
+ }
+
+ /*
+ * Prepare a init frame. Note the init frame points to queue info
+ * structure. Each frame has SGL allocated after first 64 bytes. For
+ * this frame - since we don't need any SGL - we use SGL's space as
+ * queue info structure
+ *
+ * We will not get a NULL command below. We just created the pool.
+ */
+ cmd = megasas_get_cmd(instance);
+
+ init_frame = (struct megasas_init_frame *)cmd->frame;
+ initq_info = (struct megasas_init_queue_info *)
+ ((unsigned long)init_frame + 64);
+
+ init_frame_h = cmd->frame_phys_addr;
+ initq_info_h = init_frame_h + 64;
+
+ memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
+ memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
+
+ initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
+ initq_info->reply_queue_start_phys_addr_lo =
instance->reply_queue_h;
+
+ initq_info->producer_index_phys_addr_lo = instance->producer_h;
+ initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
+
+ init_frame->cmd = MFI_CMD_INIT;
+ init_frame->cmd_status = 0xFF;
+ init_frame->queue_info_new_phys_addr_lo = initq_info_h;
+
+ init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
+
+ /*
+ * Issue the init frame in polled mode
+ */
+ if (megasas_issue_polled(instance, cmd)) {
+ printk(KERN_DEBUG "megasas: Failed to init firmware\n");
+ goto fail_fw_init;
+ }
+
+ megasas_return_cmd(instance, cmd);
+
+ ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
+
+ /*
+ * Compute the max allowed sectors per IO: The controller info has
two
+ * limits on max sectors. Driver should use the minimum of these
two.
+ *
+ * 1 << stripe_sz_ops.min = max sectors per strip
+ *
+ * Note that older firmwares ( < FW ver 30) didn't report
information
+ * to calculate max_sectors_1. So the number ended up as zero
always.
+ */
+ if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) {
+
+ max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
+ ctrl_info->max_strips_per_io;
+ max_sectors_2 = ctrl_info->max_request_size;
+
+ instance->max_sectors_per_req = (max_sectors_1 <
max_sectors_2)
+ ? max_sectors_1 : max_sectors_2;
+ } else
+ instance->max_sectors_per_req = instance->max_num_sge *
+ PAGE_SIZE / 512;
+
+ kfree(ctrl_info);
+
+ return 0;
+
+ fail_fw_init:
+ megasas_return_cmd(instance, cmd);
+
+ pci_free_consistent(instance->pdev, reply_q_sz,
+ instance->reply_queue, instance->reply_queue_h);
+ fail_reply_queue:
+ megasas_free_cmds(instance);
+
+ fail_alloc_cmds:
+ fail_ready_state:
+ iounmap(instance->reg_set);
+
+ fail_ioremap:
+ pci_release_regions(instance->pdev);
+
+ return -EINVAL;
+}
+
+/**
+ * megasas_release_mfi - Reverses the FW initialization
+ * @intance: Adapter soft state
+ */
+static void megasas_release_mfi(struct megasas_instance *instance)
+{
+ u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1);
+
+ pci_free_consistent(instance->pdev, reply_q_sz,
+ instance->reply_queue, instance->reply_queue_h);
+
+ megasas_free_cmds(instance);
+
+ iounmap(instance->reg_set);
+
+ pci_release_regions(instance->pdev);
+}
+
+/**
+ * megasas_get_seq_num - Gets latest event sequence numbers
+ * @instance: Adapter soft state
+ * @eli: FW event log sequence numbers information
+ *
+ * FW maintains a log of all events in a non-volatile area. Upper layers
would
+ * usually find out the latest sequence number of the events, the seq
number at
+ * the boot etc. They would "read" all the events below the latest seq
number
+ * by issuing a direct fw cmd (DCMD). For the future events (beyond latest
seq
+ * number), they would subsribe to AEN (asynchronous event notification)
and
+ * wait for the events to happen.
+ */
+static int
+megasas_get_seq_num(struct megasas_instance *instance,
+ struct megasas_evt_log_info *eli)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct megasas_evt_log_info *el_info;
+ dma_addr_t el_info_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+ el_info = pci_alloc_consistent(instance->pdev,
+ sizeof(struct megasas_evt_log_info),
+ &el_info_h);
+
+ if (!el_info) {
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(el_info, 0, sizeof(*el_info));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct megasas_evt_log_info);
+ dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO;
+ dcmd->sgl.sge32[0].phys_addr = el_info_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_log_info);
+
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ /*
+ * Copy the data back into callers buffer
+ */
+ memcpy(eli, el_info, sizeof(struct megasas_evt_log_info));
+
+ pci_free_consistent(instance->pdev, sizeof(struct
megasas_evt_log_info),
+ el_info, el_info_h);
+
+ megasas_return_cmd(instance, cmd);
+
+ return 0;
+}
+
+/**
+ * megasas_register_aen - Registers for asynchronous event
notification
+ * @instance: Adapter soft state
+ * @seq_num: The starting sequence number
+ * @class_locale: Class of the event
+ *
+ * This function subscribes for AEN for events beyond the @seq_num. It
requests
+ * to be notified if and only if the event is of type @class_locale
+ */
+static int
+megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
+ u32 class_locale_word)
+{
+ int ret_val;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ union megasas_evt_class_locale curr_aen;
+ union megasas_evt_class_locale prev_aen;
+
+ /*
+ * If there an AEN pending already (aen_cmd), check if the
+ * class_locale of that pending AEN is inclusive of the new
+ * AEN request we currently have. If it is, then we don't have
+ * to do anything. In other words, whichever events the current
+ * AEN request is subscribing to, have already been subscribed
+ * to.
+ *
+ * If the old_cmd is _not_ inclusive, then we have to abort
+ * that command, form a class_locale that is superset of both
+ * old and current and re-issue to the FW
+ */
+
+ curr_aen.word = class_locale_word;
+
+ if (instance->aen_cmd) {
+
+ prev_aen.word = instance->aen_cmd->frame->dcmd.mbox.w[1];
+
+ /*
+ * A class whose enum value is smaller is inclusive of all
+ * higher values. If a PROGRESS (= -1) was previously
+ * registered, then a new registration requests for higher
+ * classes need not be sent to FW. They are automatically
+ * included.
+ *
+ * Locale numbers don't have such hierarchy. They are bitmap
+ * values
+ */
+ if ((prev_aen.members.class <= curr_aen.members.class) &&
+ !((prev_aen.members.locale & curr_aen.members.locale) ^
+ curr_aen.members.locale)) {
+ /*
+ * Previously issued event registration includes
+ * current request. Nothing to do.
+ */
+ return 0;
+ } else {
+ curr_aen.members.locale |= prev_aen.members.locale;
+
+ if (prev_aen.members.class < curr_aen.members.class)
+ curr_aen.members.class =
prev_aen.members.class;
+
+ instance->aen_cmd->abort_aen = 1;
+ ret_val = megasas_issue_blocked_abort_cmd(instance,
+ instance->
+ aen_cmd);
+
+ if (ret_val) {
+ printk(KERN_DEBUG "megasas: Failed to abort
"
+ "previous AEN command\n");
+ return ret_val;
+ }
+ }
+ }
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return -ENOMEM;
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail));
+
+ /*
+ * Prepare DCMD for aen registration
+ */
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct megasas_evt_detail);
+ dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
+ dcmd->mbox.w[0] = seq_num;
+ dcmd->mbox.w[1] = curr_aen.word;
+ dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
+
+ /*
+ * Store reference to the cmd used to register for AEN. When an
+ * application wants us to register for AEN, we have to abort this
+ * cmd and re-register with a new EVENT LOCALE supplied by that app
+ */
+ instance->aen_cmd = cmd;
+
+ /*
+ * Issue the aen registration frame
+ */
+ writel(cmd->frame_phys_addr >> 3,
+ &instance->reg_set->inbound_queue_port);
+
+ return 0;
+}
+
+/**
+ * megasas_start_aen - Subscribes to AEN during driver load time
+ * @instance: Adapter soft state
+ */
+static int megasas_start_aen(struct megasas_instance *instance)
+{
+ struct megasas_evt_log_info eli;
+ union megasas_evt_class_locale class_locale;
+
+ /*
+ * Get the latest sequence number from FW
+ */
+ memset(&eli, 0, sizeof(eli));
+
+ if (megasas_get_seq_num(instance, &eli))
+ return -1;
+
+ /*
+ * Register AEN with FW for latest sequence number plus 1
+ */
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+
+ return megasas_register_aen(instance, eli.newest_seq_num + 1,
+ class_locale.word);
+}
+
+/**
+ * megasas_io_attach - Attaches this driver to SCSI mid-layer
+ * @instance: Adapter soft state
+ */
+static int megasas_io_attach(struct megasas_instance *instance)
+{
+ struct Scsi_Host *host = instance->host;
+
+ /*
+ * Export parameters required by SCSI mid-layer
+ */
+ host->irq = instance->pdev->irq;
+ host->unique_id = instance->unique_id;
+ host->can_queue = instance->max_fw_cmds - MEGASAS_INT_CMDS;
+ host->this_id = instance->init_id;
+ host->sg_tablesize = instance->max_num_sge;
+ host->max_sectors = instance->max_sectors_per_req;
+ host->cmd_per_lun = 128;
+ host->max_channel = MEGASAS_MAX_CHANNELS - 1;
+ host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
+ host->max_lun = MEGASAS_MAX_LUN;
+
+ /*
+ * Notify the mid-layer about the new controller
+ */
+ if (scsi_add_host(host, &instance->pdev->dev)) {
+ printk(KERN_DEBUG "megasas: scsi_add_host failed\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Trigger SCSI to scan our drives
+ */
+ scsi_scan_host(host);
+ return 0;
+}
+
+/**
+ * megasas_probe_one - PCI hotplug entry point
+ * @pdev: PCI device structure
+ * @id: PCI ids of supported hotplugged adapter
+ */
+static int __devinit
+megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int rval;
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ /*
+ * Announce PCI information
+ */
+ printk(KERN_INFO "megasas: %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
+ pdev->vendor, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+
+ printk(KERN_INFO "megasas: bus %d:slot %d:func %d\n",
+ pdev->bus->number, PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn));
+
+ /*
+ * PCI prepping: enable device set bus mastering and dma mask
+ */
+ rval = pci_enable_device(pdev);
+
+ if (rval) {
+ return rval;
+ }
+
+ pci_set_master(pdev);
+
+ /*
+ * All our contollers are capable of performing 64-bit DMA
+ */
+ if (IS_DMA64) {
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
+ goto fail_set_dma_mask;
+ }
+ } else {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0)
+ goto fail_set_dma_mask;
+ }
+
+ host = scsi_host_alloc(&megasas_template,
+ sizeof(struct megasas_instance));
+
+ if (!host) {
+ printk(KERN_DEBUG "megasas: scsi_host_alloc failed\n");
+ goto fail_alloc_instance;
+ }
+
+ instance = (struct megasas_instance *)host->hostdata;
+ memset(instance, 0, sizeof(*instance));
+
+ instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
+ &instance->producer_h);
+ instance->consumer = pci_alloc_consistent(pdev, sizeof(u32),
+ &instance->consumer_h);
+
+ if (!instance->producer || !instance->consumer) {
+ printk(KERN_DEBUG "megasas: Failed to allocate memory for "
+ "producer, consumer\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ *instance->producer = 0;
+ *instance->consumer = 0;
+
+ instance->evt_detail = pci_alloc_consistent(pdev,
+ sizeof(struct
+
megasas_evt_detail),
+
&instance->evt_detail_h);
+
+ if (!instance->evt_detail) {
+ printk(KERN_DEBUG "megasas: Failed to allocate memory for "
+ "event detail structure\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ /*
+ * Initialize locks and queues
+ */
+ INIT_LIST_HEAD(&instance->cmd_pool);
+
+ init_waitqueue_head(&instance->int_cmd_wait_q);
+ init_waitqueue_head(&instance->abort_cmd_wait_q);
+
+ spin_lock_init(&instance->cmd_pool_lock);
+ spin_lock_init(&instance->instance_lock);
+
+ sema_init(&instance->aen_mutex, 1);
+ sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
+
+ /*
+ * Initialize PCI related and misc parameters
+ */
+ instance->pdev = pdev;
+ instance->host = host;
+ instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
+ instance->init_id = MEGASAS_DEFAULT_INIT_ID;
+
+ /*
+ * Initialize MFI Firmware
+ */
+ if (megasas_init_mfi(instance))
+ goto fail_init_mfi;
+
+ /*
+ * Register IRQ
+ */
+ if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas",
instance)) {
+ printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
+ goto fail_irq;
+ }
+
+ megasas_enable_intr(instance->reg_set);
+
+ /*
+ * Store instance in PCI softstate
+ */
+ pci_set_drvdata(pdev, instance);
+
+ /*
+ * Add this controller to megasas_mgmt_info structure so that it
+ * can be exported to management applications
+ */
+ megasas_mgmt_info.count++;
+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance;
+ megasas_mgmt_info.max_index++;
+
+ /*
+ * Initiate AEN (Asynchronous Event Notification)
+ */
+ if (megasas_start_aen(instance)) {
+ printk(KERN_DEBUG "megasas: start aen failed\n");
+ goto fail_start_aen;
+ }
+
+ /*
+ * Register with SCSI mid-layer
+ */
+ if (megasas_io_attach(instance))
+ goto fail_io_attach;
+
+ return 0;
+
+ fail_start_aen:
+ fail_io_attach:
+ megasas_mgmt_info.count--;
+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
+ megasas_mgmt_info.max_index--;
+
+ pci_set_drvdata(pdev, NULL);
+ megasas_disable_intr(instance->reg_set);
+ free_irq(instance->pdev->irq, instance);
+
+ megasas_release_mfi(instance);
+
+ fail_irq:
+ fail_init_mfi:
+ fail_alloc_dma_buf:
+ if (instance->evt_detail)
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail,
+ instance->evt_detail_h);
+
+ if (instance->producer)
+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
+ instance->producer_h);
+ if (instance->consumer)
+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
+ instance->consumer_h);
+ scsi_host_put(host);
+
+ fail_alloc_instance:
+ fail_set_dma_mask:
+ pci_disable_device(pdev);
+
+ return -ENODEV;
+}
+
+/**
+ * megasas_flush_cache - Requests FW to flush all its caches
+ * @instance: Adapter soft state
+ */
+static void megasas_flush_cache(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return;
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 0;
+ dcmd->flags = MFI_FRAME_DIR_NONE;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = 0;
+ dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH;
+ dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
+
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ megasas_return_cmd(instance, cmd);
+
+ return;
+}
+
+/**
+ * megasas_shutdown_controller - Instructs FW to shutdown the
controller
+ * @instance: Adapter soft state
+ */
+static void megasas_shutdown_controller(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) ;
+ return;
+
+ if (instance->aen_cmd)
+ megasas_issue_blocked_abort_cmd(instance,
instance->aen_cmd);
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 0;
+ dcmd->flags = MFI_FRAME_DIR_NONE;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = 0;
+ dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN;
+
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ megasas_return_cmd(instance, cmd);
+
+ return;
+}
+
+/**
+ * megasas_detach_one - PCI hot"un"plug entry point
+ * @pdev: PCI device structure
+ */
+static void megasas_detach_one(struct pci_dev *pdev)
+{
+ int i;
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ instance = pci_get_drvdata(pdev);
+ host = instance->host;
+
+ scsi_remove_host(instance->host);
+ megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance);
+
+ /*
+ * Take the instance off the instance array. Note that we will not
+ * decrement the max_index. We let this array be sparse array
+ */
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+ if (megasas_mgmt_info.instance[i] == instance) {
+ megasas_mgmt_info.count--;
+ megasas_mgmt_info.instance[i] = NULL;
+
+ break;
+ }
+ }
+
+ pci_set_drvdata(instance->pdev, NULL);
+
+ megasas_disable_intr(instance->reg_set);
+
+ free_irq(instance->pdev->irq, instance);
+
+ megasas_release_mfi(instance);
+
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail, instance->evt_detail_h);
+
+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
+ instance->producer_h);
+
+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
+ instance->consumer_h);
+
+ scsi_host_put(host);
+
+ pci_set_drvdata(pdev, NULL);
+
+ pci_disable_device(pdev);
+
+ return;
+}
+
+/**
+ * megasas_shutdown - Shutdown entry point
+ * @device: Generic device structure
+ */
+static void megasas_shutdown(struct pci_dev *pdev)
+{
+ struct megasas_instance *instance = pci_get_drvdata(pdev);
+ megasas_flush_cache(instance);
+}
+
+/**
+ * megasas_mgmt_open - char node "open" entry point
+ */
+static int megasas_mgmt_open(struct inode *inode, struct file *filep)
+{
+ /*
+ * Allow only those users with admin rights
+ */
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ return 0;
+}
+
+/**
+ * megasas_mgmt_release - char node "release" entry point
+ */
+static int megasas_mgmt_release(struct inode *inode, struct file *filep)
+{
+ filep->private_data = NULL;
+ fasync_helper(-1, filep, 0, &megasas_async_queue);
+
+ return 0;
+}
+
+/**
+ * megasas_mgmt_fasync - Async notifier registration from
applications
+ *
+ * This function adds the calling process to a driver global queue. When an
+ * event occurs, SIGIO will be sent to all processes in this queue.
+ */
+static int megasas_mgmt_fasync(int fd, struct file *filep, int mode)
+{
+ int rc;
+
+ down(&megasas_async_queue_mutex);
+
+ rc = fasync_helper(fd, filep, mode, &megasas_async_queue);
+
+ up(&megasas_async_queue_mutex);
+
+ if (rc >= 0) {
+ /* For sanity check when we get ioctl */
+ filep->private_data = filep;
+ return 0;
+ }
+
+ printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
+
+ return rc;
+}
+
+/**
+ * megasas_mgmt_fw_ioctl - Issues management ioctls to FW
+ * @instance: Adapter soft state
+ * @argp: User's ioctl packet
+ */
+static int
+megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
+ struct megasas_iocpacket __user * user_ioc,
+ struct megasas_iocpacket *ioc)
+{
+ struct megasas_sge32 *kern_sge32;
+ struct megasas_cmd *cmd;
+ void *kbuff_arr[MAX_IOCTL_SGE];
+ dma_addr_t buf_handle = 0;
+ int error = 0, i;
+ void *sense = NULL;
+ dma_addr_t sense_handle;
+ u32 *sense_ptr;
+
+ memset(kbuff_arr, 0, sizeof(kbuff_arr));
+
+ if (ioc->sge_count > MAX_IOCTL_SGE) {
+ printk(KERN_DEBUG "megasas: SGE count [%d] > max limit
[%d]\n",
+ ioc->sge_count, MAX_IOCTL_SGE);
+ return -EINVAL;
+ }
+
+ cmd = megasas_get_cmd(instance);
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas: Failed to get a cmd packet\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * User's IOCTL packet has 2 frames (maximum). Copy those two
+ * frames into our cmd's frames. cmd->frame's context will get
+ * overwritten when we copy from user's frames. So set that value
+ * alone separately
+ */
+ memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
+ cmd->frame->hdr.context = cmd->index;
+
+ /*
+ * The management interface between applications and the fw uses
+ * MFI frames. E.g, RAID configuration changes, LD property changes
+ * etc are accomplishes through different kinds of MFI frames. The
+ * driver needs to care only about substituting user buffers with
+ * kernel buffers in SGLs. The location of SGL is embedded in the
+ * struct iocpacket itself.
+ */
+ kern_sge32 = (struct megasas_sge32 *)
+ ((unsigned long)cmd->frame + ioc->sgl_off);
+
+ /*
+ * For each user buffer, create a mirror buffer and copy in
+ */
+ for (i = 0; i < ioc->sge_count; i++) {
+ kbuff_arr[i] = pci_alloc_consistent(instance->pdev,
+ ioc->sgl[i].iov_len,
+ &buf_handle);
+ if (!kbuff_arr[i]) {
+ printk(KERN_DEBUG "megasas: Failed to alloc "
+ "kernel SGL buffer for IOCTL \n");
+ error = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * We don't change the dma_coherent_mask, so
+ * pci_alloc_consistent only returns 32bit addresses
+ */
+ kern_sge32[i].phys_addr = (u32) buf_handle;
+ kern_sge32[i].length = ioc->sgl[i].iov_len;
+
+ /*
+ * We created a kernel buffer corresponding to the
+ * user buffer. Now copy in from the user buffer
+ */
+ if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base,
+ ioc->sgl[i].iov_len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ }
+
+ if (ioc->sense_len) {
+ sense = pci_alloc_consistent(instance->pdev, ioc->sense_len,
+ &sense_handle);
+ if (!sense) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ sense_ptr =
+ (u32 *) ((unsigned long)cmd->frame + ioc->sense_off);
+ *sense_ptr = sense_handle;
+ }
+
+ /*
+ * Set the sync_cmd flag so that the ISR knows not to complete this
+ * cmd to the SCSI mid-layer
+ */
+ cmd->sync_cmd = 1;
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ /*
+ * copy out the kernel buffers user buffers
+ */
+ for (i = 0; i < ioc->sge_count; i++) {
+ if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i],
+ ioc->sgl[i].iov_len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ }
+
+ /*
+ * copy out the sense
+ */
+ if (ioc->sense_len) {
+ /*
+ * sense_ptr points to the location that has the user
+ * sense buffer address
+ */
+ sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw +
+ ioc->sense_off);
+
+ if (copy_to_user((void __user *)((unsigned
long)(*sense_ptr)),
+ sense, ioc->sense_len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ }
+
+ /*
+ * copy the status codes returned by the fw
+ */
+ if (put_user(cmd->frame->hdr.cmd_status,
+ &user_ioc->frame.hdr.cmd_status))
+ error = -EFAULT;
+
+ out:
+ if (sense) {
+ pci_free_consistent(instance->pdev, ioc->sense_len,
+ sense, sense_handle);
+ }
+
+ for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
+ pci_free_consistent(instance->pdev,
+ kern_sge32[i].length,
+ kbuff_arr[i], kern_sge32[i].phys_addr);
+ }
+
+ megasas_return_cmd(instance, cmd);
+ return error;
+}
+
+static struct megasas_instance *megasas_lookup_instance(u16 host_no)
+{
+ int i;
+
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+
+ if ((megasas_mgmt_info.instance[i]) &&
+ (megasas_mgmt_info.instance[i]->host->host_no ==
host_no))
+ return megasas_mgmt_info.instance[i];
+ }
+
+ return NULL;
+}
+
+static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
+{
+ struct megasas_iocpacket __user *user_ioc =
+ (struct megasas_iocpacket __user *)arg;
+ struct megasas_iocpacket *ioc;
+ struct megasas_instance *instance;
+ int error;
+
+ ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
+ if (!ioc)
+ return -ENOMEM;
+
+ if (copy_from_user(ioc, user_ioc, sizeof(*ioc))) {
+ error = -EFAULT;
+ goto out_kfree_ioc;
+ }
+
+ instance = megasas_lookup_instance(ioc->host_no);
+ if (!instance) {
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+
+ /*
+ * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds
+ */
+ if (down_interruptible(&instance->ioctl_sem)) {
+ error = -ERESTARTSYS;
+ goto out_kfree_ioc;
+ }
+ error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc);
+ up(&instance->ioctl_sem);
+
+ out_kfree_ioc:
+ kfree(ioc);
+ return error;
+}
+
+static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
+{
+ struct megasas_instance *instance;
+ struct megasas_aen aen;
+ int error;
+
+ if (file->private_data != file) {
+ printk(KERN_DEBUG "megasas: fasync_helper was not "
+ "called first\n");
+ return -EINVAL;
+ }
+
+ if (copy_from_user(&aen, (void __user *)arg, sizeof(aen)))
+ return -EFAULT;
+
+ instance = megasas_lookup_instance(aen.host_no);
+
+ if (!instance)
+ return -ENODEV;
+
+ down(&instance->aen_mutex);
+ error = megasas_register_aen(instance, aen.seq_num,
+ aen.class_locale_word);
+ up(&instance->aen_mutex);
+ return error;
+}
+
+/**
+ * megasas_mgmt_ioctl - char node ioctl entry point
+ */
+static long
+megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case MEGASAS_IOC_FIRMWARE:
+ return megasas_mgmt_ioctl_fw(file, arg);
+
+ case MEGASAS_IOC_GET_AEN:
+ return megasas_mgmt_ioctl_aen(file, arg);
+ }
+
+ return -ENOTTY;
+}
+
+#ifdef CONFIG_COMPAT
+struct compat_megasas_iocpacket {
+ u16 host_no;
+ u16 __pad1;
+ u32 sgl_off;
+ u32 sge_count;
+ union {
+ u8 raw[128];
+ struct megasas_header hdr;
+ } frame;
+ struct compat_iovec sgl[MAX_IOCTL_SGE];
+} __attribute__ ((packed));
+
+static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long
arg)
+{
+ struct megasas_iocpacket __user *ioc =
+ (struct megasas_iocpacket __user *)arg;
+ struct compat_megasas_iocpacket __user *cioc =
+ compat_alloc_user_space(sizeof(*cioc));
+ int i;
+
+ if (copy_in_user(&cioc->host_no, &ioc->host_no, sizeof(u16)) ||
+ copy_in_user(&cioc->sgl_off, &ioc->sgl_off, sizeof(u32)) ||
+ copy_in_user(&cioc->sge_count, &ioc->sge_count, sizeof(u32)))
+ return -EFAULT;
+
+ for (i = 0; i < MAX_IOCTL_SGE; i++) {
+ compat_uptr_t ptr;
+
+ if (get_user(ptr, &cioc->sgl[i].iov_base) ||
+ put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
+ copy_in_user(&cioc->sgl[i].iov_len,
+ &ioc->sgl[i].iov_len,
sizeof(compat_size_t)))
+ return -EFAULT;
+ }
+
+ return megasas_mgmt_ioctl_fw(file, (unsigned long)cioc);
+}
+
+static long
+megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (cmd) {
+ case MEGASAS_IOC_FIRMWARE:{
+ return megasas_mgmt_compat_ioctl_fw(file, arg);
+ }
+ case MEGASAS_IOC_GET_AEN:
+ return megasas_mgmt_ioctl_aen(file, arg);
+ }
+
+ return -ENOTTY;
+}
+#endif
+
+/*
+ * File operations structure for management interface
+ */
+static struct file_operations megasas_mgmt_fops = {
+ .owner = THIS_MODULE,
+ .open = megasas_mgmt_open,
+ .release = megasas_mgmt_release,
+ .fasync = megasas_mgmt_fasync,
+ .unlocked_ioctl = megasas_mgmt_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = megasas_mgmt_compat_ioctl,
+#endif
+};
+
+/*
+ * PCI hotplug support registration structure
+ */
+static struct pci_driver megasas_pci_driver = {
+
+ .name = "megaraid_sas",
+ .id_table = megasas_pci_table,
+ .probe = megasas_probe_one,
+ .remove = __devexit_p(megasas_detach_one),
+ .shutdown = megasas_shutdown,
+};
+
+/*
+ * Sysfs driver attributes
+ */
+static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char
*buf)
+{
+ return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n",
+ MEGASAS_VERSION);
+}
+
+static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL);
+
+static ssize_t
+megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
+{
+ return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
+ MEGASAS_RELDATE);
+}
+
+static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date,
+ NULL);
+
+/**
+ * megasas_init - Driver load entry point
+ */
+static int __init megasas_init(void)
+{
+ int rval;
+
+ /*
+ * Announce driver version and other information
+ */
+ printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
+ MEGASAS_EXT_VERSION);
+
+ memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
+
+ /*
+ * Register character device node
+ */
+ rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops);
+
+ if (rval < 0) {
+ printk(KERN_DEBUG "megasas: failed to open device node\n");
+ return rval;
+ }
+
+ megasas_mgmt_majorno = rval;
+
+ /*
+ * Register ourselves as PCI hotplug module
+ */
+ rval = pci_module_init(&megasas_pci_driver);
+
+ if (rval) {
+ printk(KERN_DEBUG "megasas: PCI hotplug regisration failed
\n");
+ unregister_chrdev(megasas_mgmt_majorno,
"megaraid_sas_ioctl");
+ }
+
+ driver_create_file(&megasas_pci_driver.driver,
&driver_attr_version);
+ driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+
+ return rval;
+}
+
+/**
+ * megasas_exit - Driver unload entry point
+ */
+static void __exit megasas_exit(void)
+{
+ driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_version);
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+
+ pci_unregister_driver(&megasas_pci_driver);
+ unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
+}
+
+module_init(megasas_init);
+module_exit(megasas_exit);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-09-01 03:07    [W:3.711 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site