lkml.org 
[lkml]   [2005]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Linux-2.6.13-rc7
    Hello, 
    It crashes for me right off the bat:
    Here is the kernel output:
    ---
    Filesystem type is ext2fs, partition type 0x83
    kernel /boot/vmlinuz-2.6.13-rc7-git1 root=/dev/hda3 ro console=ttyS0,115200n8
    CONSOLE=/dev/ttyS0
    [Linux-bzImage, setup=0x1200, size=0x1fe4fa]
    savedefault
    boot
    Linux version 2.6.13-rc7-git1 (root@dual) (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 SMP Fri Aug 26 15:18:21 EDT 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
    BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
    BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    767MB LOWMEM available.
    found SMP MP-table at 000f5fd0
    DMI 2.2 present.
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:8 APIC version 17
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 6:8 APIC version 17
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda3 ro console=ttyS0,115200n8 CONSOLE=/dev/ttyS0
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 868.668 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 774032k/786368k available (2926k kernel code, 11824k reserved, 1174k data, 220k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1739.92 BogoMIPS (lpj=8699649)
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    mtrr: v2.0 (20020519)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: Intel Pentium III (Coppermine) stepping 0a
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 1737.36 BogoMIPS (lpj=8686805)
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel Pentium III (Coppermine) stepping 0a
    Total of 2 processors activated (3477.29 BogoMIPS).
    ENABLING IO-APIC IRQs
    .TIMER: vector=0x31 pin1=2 pin2=-1
    checking TSC synchronization across 2 CPUs: passed.
    Brought up 2 CPUs
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
    PCI: Using configuration type 1
    mtrr: your CPUs had inconsistent variable MTRR settings
    mtrr: probably your BIOS does not setup all CPUs.
    mtrr: corrected configuration.
    ACPI: Subsystem revision 20050408
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Bridge: 0000:00:01.0
    IO window: a000-afff
    MEM window: d0000000-d3ffffff
    PREFETCH window: d4000000-d5ffffff
    Machine check exception polling timer started.
    audit: initializing netlink socket (disabled)
    audit(1125070419.160:1): initialized
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Initializing Cryptographic API
    PCI: Enabling Via external APIC routing
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: CPU0 (power states: C1[C1])
    ACPI: CPU1 (power states: C1[C1])
    lp: driver loaded but no devices found
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected VIA Apollo Pro 133 chipset
    agpgart: AGP aperture is 256M @ 0xc0000000
    [drm] Initialized drm 1.0.0 20040925
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [drm] Initialized tdfx 1.0.0 20010216 on minor 0: 3Dfx Interactive, Inc. Voodoo Banshee
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD por<1ai vxl0d0o6e anq:1000S [i1l
    8S5P 1
    50oduies linkedsio:: .C0 : o
    sE P: 00i0:[<c1abl2e6>] Not tainted VLI
    EFLAGS: 00010282 (2.6.13-rc7-git1)
    EIP is at 0xc160e2e6
    eax: efc4b800 ebx: c0537300 ecx: efc4b874 edx: efc4b874
    esi: effa1f90 edi: ffffe000 ebp: effa0000 esp: effa1f8c
    ds: 007b es: 007b ss: 0068
    Process swapper (pid: 0, threadinfo=effa0000 task=effd2520)
    Stack: 00000000 c160e2e0 c160e2e0 ffffe000 effa0000 c0537380 c0537300 c0100e10
    00000002 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    Call Trace:
    [<c0100e10>] cpu_idle+0x70/0x80
    Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e6 8c <ff> ff 00 00 00 00 2b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    <0>Kernel panic - not syncing: Attempted to kill the idle task!
    ---
    2.6.13-rc6 boots, but has the bug 5099 (at bugzilla.kernel.org).

    cheers,

    Masoud Sharbiani
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-08-27 05:52    [W:4.426 / U:0.424 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site