lkml.org 
[lkml]   [2005]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: new qla2xxx driver breaks SAN setup with 2 controllers
On Wed, Aug 24, 2005 at 02:48:03PM +0200, Frederik Schueler wrote:
> Hello,
>
> On Wed, Aug 24, 2005 at 11:01:12AM +0100, Christoph Hellwig wrote:
> > > yes exactly, only the bootdrive LUN is registered after bootup. I have
> > > to selectively scsiadd the other LUNs if there is a gap between the
> > > boot LUN (1-8 in our setup) and the shared storages (9-14). I don't
> > > consider this a bug though, I had to remove some devices otherwise,
> > > and old drivers had to be patched to allow this at all.
> >
> > Actually this sounds like a bug in your storage system. It's probably
> > reporting to be only SCSI2 complicant, which doesn't make sense for
> > FC storage. Please try the patch below:
>
> [...]
>
> Unfortunately this does not fix this issue, besides the SAN being
> reported as a scsi3 device now.

Cane you add BLIST_SPARSELUN and BLIST_LARGELUN to the flags aswell?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-24 14:52    [W:0.073 / U:2.552 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site