[lkml]   [2005]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.13-rc6: halt instead of reboot
Meelis Roos <> writes:

>>> It does not hang, it just powers off like on halt.
>> Ok. Then at least in part the kernel behavior is either
>> intersecting with a BIOS bug, a bad reboot script that calls halt instead,
>> or a driver that is scribbling on the wrong register. There is
>> nothing in that code path that should remove the power.
> With reboot=c, reboot=w and reboot=h it still powers off. With reboot=b it
> actually reboots. With 2.6.13-rc2 (the previous good kernel here) it just works
> and does a reboot with no special parameters.
> I also have lapic nmi_watchdog=1 in boot command line but removing these does
> not help either.
> So far I only know that rc6+somegit and rc7 power off and rc2 works, will try
> som kernels inbetween.

Hmm. Odd.

When skimming through the code I thought that reboot_thru_bios was the

So the code is currently trying a reset through the keyboard controller
and a triple fault and neither work.

If you can't track this down we can at least dig up your board DMI ID
and put it in the list of systems that need to go through the BIOS to reboot.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-08-25 05:35    [W:0.062 / U:8.456 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site