[lkml]   [2005]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: IRQ problem with PCMCIA
On Sun, Aug 21, 2005 at 03:17:39PM -0700, David Hinds wrote:
> The drivers are working correctly; the problem is with the CF flash
> adapter you're using. There are two kinds of CF-to-PCMCIA adapters.
> Some are 16-bit PCMCIA cards, which are in most cases limited to a bus
> throughput of ~1 MB/sec, regardless of what the CF card is capable
> of. There are also 32-bit CF adapter cards, that are much faster,
> limited only by the speed of the CF device. Here are two:

One caveat: I'm not sure if CardBus IDE devices are working under
Linux?? I'd think they should work with 2.6, but don't actually know
that for a fact.

-- Dave
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-08-22 00:22    [W:0.041 / U:21.816 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site