[lkml]   [2005]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.13-rc6-rt6

FYI, I ran this on my laptop (Pentium4 HT) and it locked up shortly
after it started INIT. I rebooted, and now it's up and running
with no problems!?! I'll reboot it a few more times to see if it will
lock up again.

Unfortunately, my laptop doesn't have any serial so I don't have much to
debug with it. I'll set up netconsole, but this is not as reliable
under RT, or was this fixed. I remember before that it could call things
that would schedule and had some hooks to keep interrupts on.

Oh, I also did get the message when it started:

WARNING: kstopmachine/859 changed soft IRQ-flags.
[<c0149e0b>] stop_machine+0x11b/0x160 (8)
[<c0149e7e>] do_stop+0xe/0x70 (32)
[<c0139c5a>] kthread+0xba/0xc0 (16)
[<c0139ba0>] kthread+0x0/0xc0 (28)
[<c0101385>] kernel_thread_helper+0x5/0x10 (16)
| preempt count: 00000000 ]
| 0-level deep critical section nesting:

| showing all locks held by: | (kstopmachine/859 [f74dc840, 0]):

The kernel I used was rt6 with my latest patch to the

Config attached.

-- Steve

[unhandled content-type:application/x-bzip]
 \ /
  Last update: 2005-08-17 06:24    [W:0.093 / U:24.180 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site