lkml.org 
[lkml]   [2005]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecthelp! forcedeth network errors and packet drops - Was: ACPI Standby and nvidia ethernet driver causes network errors and drops
Reference (was):
http://marc.theaimsgroup.com/?l=linux-kernel&m=112421051105982&w=2

Corrections:
1) It is not the 'nvidia' driver, it is the 'forcedeth' ethernet driver
2) It does _not_ only happen after standby, I have finally experienced
errors and drops without going into standby.

Now, with this said is there anything I can enable in the kernel to
help diagnose the issue. I am currently using 2.6.12-rc5-mm1 on this
computer. I have read that this could be caused by being at the wrong
duplex, which as far as I could tell should be full (that's what all
the other computers on the network seem to be at) but I cannot find
that information nowhere in the /proc at least. I have also changed
the network cable 3 times, which I have also read could have been the
problem.

Also here's some netstat information:
netstat -i:
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 1500 0 14503 0 0 0 17207 809 0
0 BMNRU
lo 16436 0 260 0 0 0 260 0 0
0 LRU

I have included everything I can think of between these two emails,
feel free to ask for more, or please help.

thanks,
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-17 23:36    [W:0.030 / U:2.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site