lkml.org 
[lkml]   [2005]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2 errors in 2.6.12
From
Date

Hello,

this one is solved.

Guess we will see similar issues more often for a while.

Cheers,
Hermann


Am Montag, den 01.08.2005, 20:11 +0200 schrieb CIJOML:
>
> On Mon, 1 Aug 2005, hermann pitton wrote:
>
> > Am Montag, den 01.08.2005, 11:16 +0200 schrieb CIJOML:
> > > Hi,
> > >
> > > my card is impossible to be autodetected. Valid sections for it's
> > > identification are missing.
> > >
> > > I asked for this some time ago. I need to use insmod option.
> > >
> > > Michal
> >
> > Hi Michal,
> >
> > the "tuner type=N" insmod option is gone away.
> >
> > There has been a warning that it is deprecated for about 1 1/2 years
> > in dmesg. Please remove it from /etc/modprobe.conf or where else it is
> > called and replace it with "options bttv card=N tuner=N", guess you
>
> AAAAH!!!! This helped!!! Thanks a lot
> after options bttv card=42 radio=1 tuner=1
> card works! :)
>
> Linux video capture interface: v1.00
> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low)
> -> IRQ 9
> bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio:
> 0xb69fe000
> bttv0: using: ProVideo PV951 [card=42,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv0: using tuner=1
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54
> (PV951),ta8874z
> tvaudio: found pic16c54 (PV951) @ 0x96
> bttv0: i2c: checking for TDA9887 @ 0x86... not found
> : chip found @ 0xc0 (bt878 #0 [sw])
> : All bytes are equal. It is not a TEA5767
> tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
>
> Thanks a lot!
>
> Michal
>
>
> > might use tuner=5, and what else you might need and then "depmod -a".
> > Does this help?
> >
> > Greetings,
> > Hermann
> >
> >
> > > On Sun, 31 Jul 2005, Michael Krufky wrote:
> > >
> > > > Andrew Morton wrote:
> > > >
> > > > >Michal Semler <cijoml@volny.cz> wrote:
> > > > >
> > > > >
> > > > >> This is what I gets into dmesg:
> > > > >>
> > > > >> Linux video capture interface: v1.00
> > > > >> bttv: driver version 0.9.15 loaded
> > > > >> bttv: using 8 buffers with 2080k (520 pages) each for capture
> > > > >> bttv: Bt8xx card found (0).
> > > > >> ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) ->
> > > > >> IRQ 9
> > > > >> bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio: 0xb69fe000
> > > > >> bttv0: using: ProVideo PV951 [card=42,insmod option]
> > > > >> bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> > > > >> bttv0: using tuner=1
> > > > >> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> > > > >> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> > > > >> tvaudio: TV audio decoder + audio/video mux driver
> > > > >> tvaudio: known chips:
> > > > >> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54
> > > > >> (PV951),ta8874z
> > > > >> tvaudio: found pic16c54 (PV951) @ 0x96
> > > > >> bttv0: i2c: checking for TDA9887 @ 0x86... not found
> > > > >> tuner: Unknown parameter `type'
> > ^^^^^^^^^^^^^^^^^^^^^^^^
[...]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-08-01 21:50    [from the cache]
©2003-2011 Jasper Spaans