Messages in this thread | | | Date | Sat, 30 Jul 2005 11:56:15 -0400 | From | Stephen Clark <> | Subject | Re: 2.6.12 sound problem |
| |
Stephen Clark wrote:
>Andrew Morton wrote: > > > >>(Please do reply-to-all when dealing with kernel stuff) >> >>Stephen Clark <stephen.clark@earthlink.net> wrote: >> >> >> >> >>>Takashi Iwai wrote: >>> >>> >>> >>> >>> >>>>At Tue, 26 Jul 2005 19:35:55 -0400, >>>>Stephen Clark wrote: >>>> >>>> >>>> >>>> >>>> >>>> >>>>>Hello List, >>>>> >>>>> >>>>>I recently upgraded my laptop, HP Pavilion N5430, from a 2.4.21 kernel >>>>>to 2.6.12. As a result of >>>>>doing this my sound no longer works correctly. It plays the same thing >>>>>repeatedly some number >>>>>of times - if it plays at all. >>>>> >>>>>Any ideas on how to debug this would be appreciated. >>>>> >>>>>Additional info I don't see any interrupts in /proc/interrupts for the >>>>>Allegro which is on int 5. >>>>>I just tried the same laptop with knoppix and a 2.4.27 kernel and sound >>>>>works great and I do >>>>>see interrupts for Allegro on int 5. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>The irq problem is likely related with ACPI. >>>>Try to boot once with pci=noacpi. >>>> >>>> >>>>Takashi >>>>- >>>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>>>the body of a message to majordomo@vger.kernel.org >>>>More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>Please read the FAQ at http://www.tux.org/lkml/ >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>Hi Takashi, >>> >>>I have boot the 2.6.12 kernel with acpi=off pci=noacpi,usepirqmask or I >>>get a panic or a hang. >>> >>> >>> >>> >>It's just really awful that 2.4 simply worked and 2.6 requires a sprinkle >>of obscure kernel parameters. I shudder to think how long it took you to >>work them out. >> >> >> >> >> >>>I don't have to do this with 2.4.27, anybody know why? >>> >>> >>> >>> >>> >>Perhaps you could send the `dmesg -s 1000000' output? >> >> >> >> >> >Hi Andrew, > >Thanks for the response. > >I found a better solution to my problem with my HP N5430 laptop over on >the alsa-devel list, my sound had quit working also. The new >solution, which was pointed out to me by Henry Yuan was to boot with >lapic. I had noticed in the dmesg output that a lapic existed but was >turned off by the bios, and a pseudo local apic was being used, this >caused problems with APCI and my sound. > >If you would still like the dmesg I would be glad to send it. > >Steve >- > > > Hello Andrew
My joy was short lived - but I do have more info.
1) If I cold boot with only 'lacpi' to run level 3 - shortly after I get the login prompt the laptop freezes.
2) If I cold boot with 'lacpi acpi=off pci=noacpi,usepirqmask' the system boots and does not freeze but when I try to play sound I get no interrupts from my sound card.
3) If I now warm boot from step 2 with only 'lacpi' my laptop seems to be stable and I have sound.
I did this several times to try and really verify the above scenarios.
Diff between dmesg output from step 1 and step 3 $ diff dmesg104550 dmesg105029 43,45c43,44 < CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 < CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 < Enabling disabled K7/SSE Support. --- > CPU: After generic identify, caps: 0383f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 > CPU: After vendor identify, caps: 0383f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 55c54 < ACPI: setting ELCR to 0200 (from 0800) --- > ACPI: setting ELCR to 0200 (from 0820) 92c91 < audit(1122734733.300:1): initialized --- > audit(1122735011.179:1): initialized 161c160 < Detected 849.810 MHz processor. --- > Detected 850.192 MHz processor. 163c162 < powernow: Minimum speed 299 MHz. Maximum speed 849 MHz. --- > powernow: Minimum speed 300 MHz. Maximum speed 850 MHz.
I also captured dmesg output from the 3 steps, which are listed below
from step 1. Linux version 2.6.12-1.1398_FC4 (bhcompile@tweety.build.redhat.com) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #1 Fri Jul 15 00:52:32 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000ffff000 (ACPI data) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7c20 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0fffcc46 ACPI: FADT (v001 ALI M1533 0x06040000 PTL 0x000f4240) @ 0x0fffef64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0fffefd8 ACPI: DSDT (v001 COMPAL 736 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c0454000 soft=c0453000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 849.759 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 253496k/262080k available (2508k kernel code, 7896k reserved, 684k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1687.55 BogoMIPS (lpj=843776) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Duron(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0800) checking if image is initramfs... it is Freeing initrd memory: 1670k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs *9) ACPI: Embedded Controller [EC0] (gpe 25) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:06: ioport range 0x3810-0x381f has been reserved pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:06: ioport range 0x8000-0x805f could not be reserved pnp: 00:06: ioport range 0x4d6-0x4d6 has been reserved Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1122734733.300:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 57652F2F3358E32D - User ID: Red Hat, Inc. (Kernel Module GPG key) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (63 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected ALi M1647 chipset agpgart: AGP aperture is 64M @ 0xf0000000 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HITACHI_DK23CA-20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 458752 bytes) TCP: Hash tables configured (established 16384 bind 16384) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. Detected 849.810 MHz processor. powernow: SGTC: 10000 powernow: Minimum speed 299 MHz. Maximum speed 849 MHz. ACPI wakeup devices: SBTN LAN COM1 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 184k freed input: AT Translated Set 2 keyboard on isa0060/serio0 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com input: PS/2 Generic Mouse on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Enabling device 0000:00:10.0 (0010 -> 0013) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 17 at d0834000, 00:D0:59:5C:E0:EB, IRQ 11. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 9, io mem 0xfff70000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SBTN] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
from step 2. Linux version 2.6.12-1.1398_FC4 (bhcompile@tweety.build.redhat.com) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #1 Fri Jul 15 00:52:32 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000ffff000 (ACPI data) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 single acpi=off pci=noacpi,usepirqmask lapic rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c0454000 soft=c0453000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 849.764 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 253496k/262080k available (2508k kernel code, 7896k reserved, 684k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1675.26 BogoMIPS (lpj=837632) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Duron(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1670k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Using ALI IRQ Router PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1122734871.934:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 57652F2F3358E32D - User ID: Red Hat, Inc. (Kernel Module GPG key) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected ALi M1647 chipset agpgart: AGP aperture is 64M @ 0xf0000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HITACHI_DK23CA-20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 458752 bytes) TCP: Hash tables configured (established 16384 bind 16384) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. Detected 850.279 MHz processor. powernow: SGTC: 10000 powernow: Minimum speed 300 MHz. Maximum speed 850 MHz. Freeing unused kernel memory: 184k freed input: AT Translated Set 2 keyboard on isa0060/serio0 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. input: PS/2 Generic Mouse on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3-fs: dm-0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 4125296 ext3_orphan_cleanup: deleting unreferenced inode 4125294 EXT3-fs: dm-0: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Enabling device 0000:00:10.0 (0010 -> 0013) PCI: setting IRQ 11 as level-triggered PCI: Assigned IRQ 11 for device 0000:00:10.0 PCI: Sharing IRQ 11 with 0000:00:04.0 PCI: Sharing IRQ 11 with 0000:00:04.1 PCI: Sharing IRQ 11 with 0000:01:00.0 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 17 at d0818000, 00:D0:59:5C:E0:EB, IRQ 11. PCI: setting IRQ 5 as level-triggered PCI: Assigned IRQ 5 for device 0000:00:08.0 PCI: Sharing IRQ 5 with 0000:00:08.1 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Assigned IRQ 11 for device 0000:00:02.0 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 11, io mem 0xfff70000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Assigned IRQ 11 for device 0000:00:04.0 PCI: Sharing IRQ 11 with 0000:00:04.1 PCI: Sharing IRQ 11 with 0000:00:10.0 PCI: Sharing IRQ 11 with 0000:01:00.0 Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0698, PCI irq 11 Socket status: 30000006 PCI: Assigned IRQ 11 for device 0000:00:04.1 PCI: Sharing IRQ 11 with 0000:00:04.0 PCI: Sharing IRQ 11 with 0000:00:10.0 PCI: Sharing IRQ 11 with 0000:01:00.0 Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66 spurious 8259A interrupt: IRQ7. Yenta: ISA IRQ mask 0x0698, PCI irq 11 Socket status: 30000006 0000:00:10.0: tulip_stop_rxtx() failed eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
Step 3. Linux version 2.6.12-1.1398_FC4 (bhcompile@tweety.build.redhat.com) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #1 Fri Jul 15 00:52:32 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000ffff000 (ACPI data) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7c20 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0fffcc46 ACPI: FADT (v001 ALI M1533 0x06040000 PTL 0x000f4240) @ 0x0fffef64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0fffefd8 ACPI: DSDT (v001 COMPAL 736 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 lapic rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c0454000 soft=c0453000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 849.759 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 253496k/262080k available (2508k kernel code, 7896k reserved, 684k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1687.55 BogoMIPS (lpj=843776) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Duron(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0820) checking if image is initramfs... it is Freeing initrd memory: 1670k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs *9) ACPI: Embedded Controller [EC0] (gpe 25) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:06: ioport range 0x3810-0x381f has been reserved pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:06: ioport range 0x8000-0x805f could not be reserved pnp: 00:06: ioport range 0x4d6-0x4d6 has been reserved Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1122735011.179:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 57652F2F3358E32D - User ID: Red Hat, Inc. (Kernel Module GPG key) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (63 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected ALi M1647 chipset agpgart: AGP aperture is 64M @ 0xf0000000 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HITACHI_DK23CA-20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 458752 bytes) TCP: Hash tables configured (established 16384 bind 16384) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. Detected 850.192 MHz processor. powernow: SGTC: 10000 powernow: Minimum speed 300 MHz. Maximum speed 850 MHz. ACPI wakeup devices: SBTN LAN COM1 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 184k freed input: AT Translated Set 2 keyboard on isa0060/serio0 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com input: PS/2 Generic Mouse on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Enabling device 0000:00:10.0 (0010 -> 0013) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 17 at d0834000, 00:D0:59:5C:E0:EB, IRQ 11. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 9, io mem 0xfff70000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SBTN] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
Any ideas would be appreciated. Steve - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |