lkml.org 
[lkml]   [2005]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH 14/14] ppc32: Remove board support for PCORE
    Support for the PCORE board is no longer maintained and thus being removed

    Signed-off-by: Kumar Gala <kumar.gala@freescale.com>

    ---
    commit a287e1a2f397c7c4aeba88169b413500bd642fcc
    tree 5fce3a854f01aa7889bc684d9e6a81386ce1e293
    parent 715aa4926267a11452ddd3f3abffc19bdefdcb88
    author Kumar K. Gala <kumar.gala@freescale.com> Mon, 25 Jul 2005 22:23:47 -0500
    committer Kumar K. Gala <kumar.gala@freescale.com> Mon, 25 Jul 2005 22:23:47 -0500

    arch/ppc/Kconfig | 9
    arch/ppc/boot/simple/Makefile | 7
    arch/ppc/configs/pcore_defconfig | 716 --------------------------------------
    arch/ppc/platforms/Makefile | 1
    arch/ppc/platforms/pcore.c | 352 -------------------
    arch/ppc/platforms/pcore.h | 39 --
    arch/ppc/syslib/Makefile | 1
    7 files changed, 3 insertions(+), 1122 deletions(-)

    diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
    --- a/arch/ppc/Kconfig
    +++ b/arch/ppc/Kconfig
    @@ -548,9 +548,6 @@ config CPCI690
    help
    Select CPCI690 if configuring a Force CPCI690 cPCI board.

    -config PCORE
    - bool "Force-PowerCore"
    -
    config POWERPMC250
    bool "Force-PowerPMC250"

    @@ -756,7 +753,7 @@ config PPC_OF

    config PPC_GEN550
    bool
    - depends on SANDPOINT || SPRUCE || PPLUS || PCORE || \
    + depends on SANDPOINT || SPRUCE || PPLUS || \
    PRPMC750 || PRPMC800 || LOPEC || \
    (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
    83xx
    @@ -764,7 +761,7 @@ config PPC_GEN550

    config FORCE
    bool
    - depends on 6xx && (PCORE || POWERPMC250)
    + depends on 6xx && POWERPMC250
    default y

    config GT64260
    @@ -827,7 +824,7 @@ config EPIC_SERIAL_MODE

    config MPC10X_BRIDGE
    bool
    - depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
    + depends on POWERPMC250 || LOPEC || SANDPOINT
    default y

    config MPC10X_OPENPIC
    diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
    --- a/arch/ppc/boot/simple/Makefile
    +++ b/arch/ppc/boot/simple/Makefile
    @@ -103,7 +103,6 @@ zimageinitrd-$(CONFIG_GEMINI) := zImage
    motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
    $(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
    motorola := $(strip $(motorola))
    -pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250)

    zimage-$(motorola) := zImage-PPLUS
    zimageinitrd-$(motorola) := zImage.initrd-PPLUS
    @@ -112,12 +111,6 @@ zimageinitrd-$(motorola) := zImage.init
    # Overrides previous assingment
    extra.o-$(CONFIG_PPLUS) := prepmap.o
    extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o
    -
    - zimage-$(pcore) := zImage-STRIPELF
    -zimageinitrd-$(pcore) := zImage.initrd-STRIPELF
    - extra.o-$(pcore) := chrpmap.o
    - end-$(pcore) := pcore
    - cacheflag-$(pcore) := -include $(clear_L2_L3)

    # Really only valid if CONFIG_6xx=y
    zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS
    diff --git a/arch/ppc/configs/pcore_defconfig b/arch/ppc/configs/pcore_defconfig
    deleted file mode 100644
    --- a/arch/ppc/configs/pcore_defconfig
    +++ /dev/null
    @@ -1,716 +0,0 @@
    -#
    -# Automatically generated make config: don't edit
    -#
    -CONFIG_MMU=y
    -CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    -CONFIG_HAVE_DEC_LOCK=y
    -CONFIG_PPC=y
    -CONFIG_PPC32=y
    -CONFIG_GENERIC_NVRAM=y
    -
    -#
    -# Code maturity level options
    -#
    -CONFIG_EXPERIMENTAL=y
    -CONFIG_CLEAN_COMPILE=y
    -CONFIG_STANDALONE=y
    -CONFIG_BROKEN_ON_SMP=y
    -
    -#
    -# General setup
    -#
    -CONFIG_SWAP=y
    -CONFIG_SYSVIPC=y
    -# CONFIG_BSD_PROCESS_ACCT is not set
    -CONFIG_SYSCTL=y
    -CONFIG_LOG_BUF_SHIFT=14
    -# CONFIG_HOTPLUG is not set
    -# CONFIG_IKCONFIG is not set
    -CONFIG_EMBEDDED=y
    -CONFIG_KALLSYMS=y
    -CONFIG_FUTEX=y
    -CONFIG_EPOLL=y
    -CONFIG_IOSCHED_NOOP=y
    -CONFIG_IOSCHED_AS=y
    -CONFIG_IOSCHED_DEADLINE=y
    -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    -
    -#
    -# Loadable module support
    -#
    -CONFIG_MODULES=y
    -CONFIG_MODULE_UNLOAD=y
    -# CONFIG_MODULE_FORCE_UNLOAD is not set
    -CONFIG_OBSOLETE_MODPARM=y
    -# CONFIG_MODVERSIONS is not set
    -CONFIG_KMOD=y
    -
    -#
    -# Processor
    -#
    -CONFIG_6xx=y
    -# CONFIG_40x is not set
    -# CONFIG_44x is not set
    -# CONFIG_POWER3 is not set
    -# CONFIG_POWER4 is not set
    -# CONFIG_8xx is not set
    -CONFIG_ALTIVEC=y
    -# CONFIG_TAU is not set
    -# CONFIG_CPU_FREQ is not set
    -CONFIG_PPC_STD_MMU=y
    -
    -#
    -# Platform options
    -#
    -# CONFIG_PPC_MULTIPLATFORM is not set
    -# CONFIG_APUS is not set
    -# CONFIG_WILLOW is not set
    -CONFIG_PCORE=y
    -# CONFIG_POWERPMC250 is not set
    -# CONFIG_EV64260 is not set
    -# CONFIG_SPRUCE is not set
    -# CONFIG_LOPEC is not set
    -# CONFIG_MCPN765 is not set
    -# CONFIG_MVME5100 is not set
    -# CONFIG_PPLUS is not set
    -# CONFIG_PRPMC750 is not set
    -# CONFIG_PRPMC800 is not set
    -# CONFIG_SANDPOINT is not set
    -# CONFIG_ADIR is not set
    -# CONFIG_K2 is not set
    -# CONFIG_PAL4 is not set
    -# CONFIG_GEMINI is not set
    -# CONFIG_EST8260 is not set
    -# CONFIG_SBS8260 is not set
    -# CONFIG_RPX6 is not set
    -# CONFIG_TQM8260 is not set
    -CONFIG_PPC_GEN550=y
    -CONFIG_FORCE=y
    -# CONFIG_MPC10X_STORE_GATHERING is not set
    -# CONFIG_SMP is not set
    -# CONFIG_PREEMPT is not set
    -# CONFIG_HIGHMEM is not set
    -CONFIG_KERNEL_ELF=y
    -CONFIG_BINFMT_ELF=y
    -# CONFIG_BINFMT_MISC is not set
    -CONFIG_CMDLINE_BOOL=y
    -CONFIG_CMDLINE="ip=on"
    -
    -#
    -# Bus options
    -#
    -CONFIG_GENERIC_ISA_DMA=y
    -CONFIG_PCI=y
    -CONFIG_PCI_DOMAINS=y
    -# CONFIG_PCI_LEGACY_PROC is not set
    -# CONFIG_PCI_NAMES is not set
    -
    -#
    -# Advanced setup
    -#
    -# CONFIG_ADVANCED_OPTIONS is not set
    -
    -#
    -# Default settings for advanced configuration options are used
    -#
    -CONFIG_HIGHMEM_START=0xfe000000
    -CONFIG_LOWMEM_SIZE=0x30000000
    -CONFIG_KERNEL_START=0xc0000000
    -CONFIG_TASK_SIZE=0x80000000
    -CONFIG_BOOT_LOAD=0x00800000
    -
    -#
    -# Device Drivers
    -#
    -
    -#
    -# Generic Driver Options
    -#
    -
    -#
    -# Memory Technology Devices (MTD)
    -#
    -# CONFIG_MTD is not set
    -
    -#
    -# Parallel port support
    -#
    -# CONFIG_PARPORT is not set
    -
    -#
    -# Plug and Play support
    -#
    -
    -#
    -# Block devices
    -#
    -# CONFIG_BLK_DEV_FD is not set
    -# CONFIG_BLK_CPQ_DA is not set
    -# CONFIG_BLK_CPQ_CISS_DA is not set
    -# CONFIG_BLK_DEV_DAC960 is not set
    -# CONFIG_BLK_DEV_UMEM is not set
    -# CONFIG_BLK_DEV_LOOP is not set
    -# CONFIG_BLK_DEV_NBD is not set
    -# CONFIG_BLK_DEV_CARMEL is not set
    -CONFIG_BLK_DEV_RAM=y
    -CONFIG_BLK_DEV_RAM_SIZE=4096
    -CONFIG_BLK_DEV_INITRD=y
    -# CONFIG_LBD is not set
    -
    -#
    -# ATA/ATAPI/MFM/RLL support
    -#
    -# CONFIG_IDE is not set
    -
    -#
    -# SCSI device support
    -#
    -CONFIG_SCSI=y
    -CONFIG_SCSI_PROC_FS=y
    -
    -#
    -# SCSI support type (disk, tape, CD-ROM)
    -#
    -CONFIG_BLK_DEV_SD=y
    -# CONFIG_CHR_DEV_ST is not set
    -# CONFIG_CHR_DEV_OSST is not set
    -CONFIG_BLK_DEV_SR=y
    -# CONFIG_BLK_DEV_SR_VENDOR is not set
    -# CONFIG_CHR_DEV_SG is not set
    -
    -#
    -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    -#
    -# CONFIG_SCSI_MULTI_LUN is not set
    -# CONFIG_SCSI_REPORT_LUNS is not set
    -# CONFIG_SCSI_CONSTANTS is not set
    -# CONFIG_SCSI_LOGGING is not set
    -
    -#
    -# SCSI Transport Attributes
    -#
    -# CONFIG_SCSI_SPI_ATTRS is not set
    -# CONFIG_SCSI_FC_ATTRS is not set
    -
    -#
    -# SCSI low-level drivers
    -#
    -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    -# CONFIG_SCSI_ACARD is not set
    -# CONFIG_SCSI_AACRAID is not set
    -# CONFIG_SCSI_AIC7XXX is not set
    -# CONFIG_SCSI_AIC7XXX_OLD is not set
    -# CONFIG_SCSI_AIC79XX is not set
    -# CONFIG_SCSI_ADVANSYS is not set
    -# CONFIG_SCSI_MEGARAID is not set
    -# CONFIG_SCSI_SATA is not set
    -# CONFIG_SCSI_BUSLOGIC is not set
    -# CONFIG_SCSI_CPQFCTS is not set
    -# CONFIG_SCSI_DMX3191D is not set
    -# CONFIG_SCSI_EATA is not set
    -# CONFIG_SCSI_EATA_PIO is not set
    -# CONFIG_SCSI_FUTURE_DOMAIN is not set
    -# CONFIG_SCSI_GDTH is not set
    -# CONFIG_SCSI_IPS is not set
    -# CONFIG_SCSI_INIA100 is not set
    -CONFIG_SCSI_SYM53C8XX_2=y
    -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
    -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
    -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
    -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
    -# CONFIG_SCSI_QLOGIC_ISP is not set
    -# CONFIG_SCSI_QLOGIC_FC is not set
    -# CONFIG_SCSI_QLOGIC_1280 is not set
    -CONFIG_SCSI_QLA2XXX=y
    -# CONFIG_SCSI_QLA21XX is not set
    -# CONFIG_SCSI_QLA22XX is not set
    -# CONFIG_SCSI_QLA2300 is not set
    -# CONFIG_SCSI_QLA2322 is not set
    -# CONFIG_SCSI_QLA6312 is not set
    -# CONFIG_SCSI_QLA6322 is not set
    -# CONFIG_SCSI_DC395x is not set
    -# CONFIG_SCSI_DC390T is not set
    -# CONFIG_SCSI_NSP32 is not set
    -# CONFIG_SCSI_DEBUG is not set
    -
    -#
    -# Multi-device support (RAID and LVM)
    -#
    -# CONFIG_MD is not set
    -
    -#
    -# Fusion MPT device support
    -#
    -# CONFIG_FUSION is not set
    -
    -#
    -# IEEE 1394 (FireWire) support
    -#
    -# CONFIG_IEEE1394 is not set
    -
    -#
    -# I2O device support
    -#
    -# CONFIG_I2O is not set
    -
    -#
    -# Macintosh device drivers
    -#
    -
    -#
    -# Networking support
    -#
    -CONFIG_NET=y
    -
    -#
    -# Networking options
    -#
    -CONFIG_PACKET=y
    -# CONFIG_PACKET_MMAP is not set
    -# CONFIG_NETLINK_DEV is not set
    -CONFIG_UNIX=y
    -# CONFIG_NET_KEY is not set
    -CONFIG_INET=y
    -CONFIG_IP_MULTICAST=y
    -# CONFIG_IP_ADVANCED_ROUTER is not set
    -CONFIG_IP_PNP=y
    -CONFIG_IP_PNP_DHCP=y
    -# CONFIG_IP_PNP_BOOTP is not set
    -# CONFIG_IP_PNP_RARP is not set
    -# CONFIG_NET_IPIP is not set
    -# CONFIG_NET_IPGRE is not set
    -# CONFIG_IP_MROUTE is not set
    -# CONFIG_ARPD is not set
    -# CONFIG_SYN_COOKIES is not set
    -# CONFIG_INET_AH is not set
    -# CONFIG_INET_ESP is not set
    -# CONFIG_INET_IPCOMP is not set
    -
    -#
    -# IP: Virtual Server Configuration
    -#
    -# CONFIG_IP_VS is not set
    -# CONFIG_IPV6 is not set
    -# CONFIG_DECNET is not set
    -# CONFIG_BRIDGE is not set
    -CONFIG_NETFILTER=y
    -# CONFIG_NETFILTER_DEBUG is not set
    -
    -#
    -# IP: Netfilter Configuration
    -#
    -CONFIG_IP_NF_CONNTRACK=m
    -CONFIG_IP_NF_FTP=m
    -CONFIG_IP_NF_IRC=m
    -# CONFIG_IP_NF_TFTP is not set
    -# CONFIG_IP_NF_AMANDA is not set
    -# CONFIG_IP_NF_QUEUE is not set
    -CONFIG_IP_NF_IPTABLES=m
    -CONFIG_IP_NF_MATCH_LIMIT=m
    -# CONFIG_IP_NF_MATCH_IPRANGE is not set
    -CONFIG_IP_NF_MATCH_MAC=m
    -CONFIG_IP_NF_MATCH_PKTTYPE=m
    -CONFIG_IP_NF_MATCH_MARK=m
    -CONFIG_IP_NF_MATCH_MULTIPORT=m
    -CONFIG_IP_NF_MATCH_TOS=m
    -# CONFIG_IP_NF_MATCH_RECENT is not set
    -CONFIG_IP_NF_MATCH_ECN=m
    -CONFIG_IP_NF_MATCH_DSCP=m
    -CONFIG_IP_NF_MATCH_AH_ESP=m
    -CONFIG_IP_NF_MATCH_LENGTH=m
    -CONFIG_IP_NF_MATCH_TTL=m
    -CONFIG_IP_NF_MATCH_TCPMSS=m
    -CONFIG_IP_NF_MATCH_HELPER=m
    -CONFIG_IP_NF_MATCH_STATE=m
    -CONFIG_IP_NF_MATCH_CONNTRACK=m
    -CONFIG_IP_NF_MATCH_OWNER=m
    -CONFIG_IP_NF_FILTER=m
    -CONFIG_IP_NF_TARGET_REJECT=m
    -CONFIG_IP_NF_NAT=m
    -CONFIG_IP_NF_NAT_NEEDED=y
    -CONFIG_IP_NF_TARGET_MASQUERADE=m
    -CONFIG_IP_NF_TARGET_REDIRECT=m
    -# CONFIG_IP_NF_TARGET_NETMAP is not set
    -# CONFIG_IP_NF_TARGET_SAME is not set
    -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
    -CONFIG_IP_NF_NAT_IRC=m
    -CONFIG_IP_NF_NAT_FTP=m
    -# CONFIG_IP_NF_MANGLE is not set
    -# CONFIG_IP_NF_TARGET_LOG is not set
    -CONFIG_IP_NF_TARGET_ULOG=m
    -CONFIG_IP_NF_TARGET_TCPMSS=m
    -CONFIG_IP_NF_ARPTABLES=m
    -CONFIG_IP_NF_ARPFILTER=m
    -# CONFIG_IP_NF_ARP_MANGLE is not set
    -CONFIG_IP_NF_COMPAT_IPCHAINS=m
    -# CONFIG_IP_NF_COMPAT_IPFWADM is not set
    -
    -#
    -# SCTP Configuration (EXPERIMENTAL)
    -#
    -# CONFIG_IP_SCTP is not set
    -# CONFIG_ATM is not set
    -# CONFIG_VLAN_8021Q is not set
    -# CONFIG_LLC2 is not set
    -# CONFIG_IPX is not set
    -# CONFIG_ATALK is not set
    -# CONFIG_X25 is not set
    -# CONFIG_LAPB is not set
    -# CONFIG_NET_DIVERT is not set
    -# CONFIG_ECONET is not set
    -# CONFIG_WAN_ROUTER is not set
    -# CONFIG_NET_HW_FLOWCONTROL is not set
    -
    -#
    -# QoS and/or fair queueing
    -#
    -# CONFIG_NET_SCHED is not set
    -
    -#
    -# Network testing
    -#
    -# CONFIG_NET_PKTGEN is not set
    -CONFIG_NETDEVICES=y
    -
    -#
    -# ARCnet devices
    -#
    -# CONFIG_ARCNET is not set
    -# CONFIG_DUMMY is not set
    -# CONFIG_BONDING is not set
    -# CONFIG_EQUALIZER is not set
    -# CONFIG_TUN is not set
    -
    -#
    -# Ethernet (10 or 100Mbit)
    -#
    -CONFIG_NET_ETHERNET=y
    -CONFIG_MII=y
    -# CONFIG_OAKNET is not set
    -# CONFIG_HAPPYMEAL is not set
    -# CONFIG_SUNGEM is not set
    -# CONFIG_NET_VENDOR_3COM is not set
    -
    -#
    -# Tulip family network device support
    -#
    -CONFIG_NET_TULIP=y
    -# CONFIG_DE2104X is not set
    -CONFIG_TULIP=y
    -# CONFIG_TULIP_MWI is not set
    -# CONFIG_TULIP_MMIO is not set
    -# CONFIG_TULIP_NAPI is not set
    -# CONFIG_DE4X5 is not set
    -# CONFIG_WINBOND_840 is not set
    -# CONFIG_DM9102 is not set
    -# CONFIG_HP100 is not set
    -CONFIG_NET_PCI=y
    -# CONFIG_PCNET32 is not set
    -# CONFIG_AMD8111_ETH is not set
    -# CONFIG_ADAPTEC_STARFIRE is not set
    -# CONFIG_B44 is not set
    -# CONFIG_FORCEDETH is not set
    -# CONFIG_DGRS is not set
    -CONFIG_EEPRO100=y
    -# CONFIG_EEPRO100_PIO is not set
    -# CONFIG_E100 is not set
    -# CONFIG_FEALNX is not set
    -# CONFIG_NATSEMI is not set
    -# CONFIG_NE2K_PCI is not set
    -# CONFIG_8139CP is not set
    -# CONFIG_8139TOO is not set
    -# CONFIG_SIS900 is not set
    -# CONFIG_EPIC100 is not set
    -# CONFIG_SUNDANCE is not set
    -# CONFIG_TLAN is not set
    -# CONFIG_VIA_RHINE is not set
    -
    -#
    -# Ethernet (1000 Mbit)
    -#
    -# CONFIG_ACENIC is not set
    -# CONFIG_DL2K is not set
    -# CONFIG_E1000 is not set
    -# CONFIG_NS83820 is not set
    -# CONFIG_HAMACHI is not set
    -# CONFIG_YELLOWFIN is not set
    -# CONFIG_R8169 is not set
    -# CONFIG_SIS190 is not set
    -# CONFIG_SK98LIN is not set
    -# CONFIG_TIGON3 is not set
    -
    -#
    -# Ethernet (10000 Mbit)
    -#
    -# CONFIG_IXGB is not set
    -# CONFIG_FDDI is not set
    -# CONFIG_HIPPI is not set
    -# CONFIG_PPP is not set
    -# CONFIG_SLIP is not set
    -
    -#
    -# Wireless LAN (non-hamradio)
    -#
    -# CONFIG_NET_RADIO is not set
    -
    -#
    -# Token Ring devices
    -#
    -# CONFIG_TR is not set
    -# CONFIG_NET_FC is not set
    -# CONFIG_RCPCI is not set
    -# CONFIG_SHAPER is not set
    -# CONFIG_NETCONSOLE is not set
    -
    -#
    -# Wan interfaces
    -#
    -# CONFIG_WAN is not set
    -
    -#
    -# Amateur Radio support
    -#
    -# CONFIG_HAMRADIO is not set
    -
    -#
    -# IrDA (infrared) support
    -#
    -# CONFIG_IRDA is not set
    -
    -#
    -# Bluetooth support
    -#
    -# CONFIG_BT is not set
    -# CONFIG_NETPOLL is not set
    -# CONFIG_NET_POLL_CONTROLLER is not set
    -
    -#
    -# ISDN subsystem
    -#
    -# CONFIG_ISDN is not set
    -
    -#
    -# Telephony Support
    -#
    -# CONFIG_PHONE is not set
    -
    -#
    -# Input device support
    -#
    -# CONFIG_INPUT is not set
    -
    -#
    -# Userland interfaces
    -#
    -
    -#
    -# Input I/O drivers
    -#
    -# CONFIG_GAMEPORT is not set
    -CONFIG_SOUND_GAMEPORT=y
    -# CONFIG_SERIO is not set
    -# CONFIG_SERIO_I8042 is not set
    -
    -#
    -# Input Device Drivers
    -#
    -
    -#
    -# Character devices
    -#
    -# CONFIG_VT is not set
    -# CONFIG_SERIAL_NONSTANDARD is not set
    -
    -#
    -# Serial drivers
    -#
    -CONFIG_SERIAL_8250=y
    -CONFIG_SERIAL_8250_CONSOLE=y
    -CONFIG_SERIAL_8250_NR_UARTS=2
    -# CONFIG_SERIAL_8250_EXTENDED is not set
    -
    -#
    -# Non-8250 serial port support
    -#
    -CONFIG_SERIAL_CORE=y
    -CONFIG_SERIAL_CORE_CONSOLE=y
    -CONFIG_UNIX98_PTYS=y
    -CONFIG_LEGACY_PTYS=y
    -CONFIG_LEGACY_PTY_COUNT=256
    -# CONFIG_QIC02_TAPE is not set
    -
    -#
    -# IPMI
    -#
    -# CONFIG_IPMI_HANDLER is not set
    -
    -#
    -# Watchdog Cards
    -#
    -# CONFIG_WATCHDOG is not set
    -# CONFIG_NVRAM is not set
    -CONFIG_GEN_RTC=y
    -# CONFIG_GEN_RTC_X is not set
    -# CONFIG_DTLK is not set
    -# CONFIG_R3964 is not set
    -# CONFIG_APPLICOM is not set
    -
    -#
    -# Ftape, the floppy tape device driver
    -#
    -# CONFIG_FTAPE is not set
    -# CONFIG_AGP is not set
    -# CONFIG_DRM is not set
    -# CONFIG_RAW_DRIVER is not set
    -
    -#
    -# I2C support
    -#
    -# CONFIG_I2C is not set
    -
    -#
    -# Misc devices
    -#
    -
    -#
    -# Multimedia devices
    -#
    -# CONFIG_VIDEO_DEV is not set
    -
    -#
    -# Digital Video Broadcasting Devices
    -#
    -# CONFIG_DVB is not set
    -
    -#
    -# Graphics support
    -#
    -# CONFIG_FB is not set
    -
    -#
    -# Sound
    -#
    -# CONFIG_SOUND is not set
    -
    -#
    -# USB support
    -#
    -# CONFIG_USB is not set
    -
    -#
    -# USB Gadget Support
    -#
    -# CONFIG_USB_GADGET is not set
    -
    -#
    -# File systems
    -#
    -CONFIG_EXT2_FS=y
    -# CONFIG_EXT2_FS_XATTR is not set
    -CONFIG_EXT3_FS=y
    -CONFIG_EXT3_FS_XATTR=y
    -# CONFIG_EXT3_FS_POSIX_ACL is not set
    -# CONFIG_EXT3_FS_SECURITY is not set
    -CONFIG_JBD=y
    -# CONFIG_JBD_DEBUG is not set
    -CONFIG_FS_MBCACHE=y
    -# CONFIG_REISERFS_FS is not set
    -# CONFIG_JFS_FS is not set
    -# CONFIG_XFS_FS is not set
    -# CONFIG_MINIX_FS is not set
    -# CONFIG_ROMFS_FS is not set
    -# CONFIG_QUOTA is not set
    -# CONFIG_AUTOFS_FS is not set
    -# CONFIG_AUTOFS4_FS is not set
    -
    -#
    -# CD-ROM/DVD Filesystems
    -#
    -# CONFIG_ISO9660_FS is not set
    -# CONFIG_UDF_FS is not set
    -
    -#
    -# DOS/FAT/NT Filesystems
    -#
    -# CONFIG_FAT_FS is not set
    -# CONFIG_NTFS_FS is not set
    -
    -#
    -# Pseudo filesystems
    -#
    -CONFIG_PROC_FS=y
    -CONFIG_PROC_KCORE=y
    -# CONFIG_DEVFS_FS is not set
    -# CONFIG_DEVPTS_FS_XATTR is not set
    -CONFIG_TMPFS=y
    -# CONFIG_HUGETLB_PAGE is not set
    -CONFIG_RAMFS=y
    -
    -#
    -# Miscellaneous filesystems
    -#
    -# CONFIG_ADFS_FS is not set
    -# CONFIG_AFFS_FS is not set
    -# CONFIG_HFS_FS is not set
    -# CONFIG_HFSPLUS_FS is not set
    -# CONFIG_BEFS_FS is not set
    -# CONFIG_BFS_FS is not set
    -# CONFIG_EFS_FS is not set
    -# CONFIG_CRAMFS is not set
    -# CONFIG_VXFS_FS is not set
    -# CONFIG_HPFS_FS is not set
    -# CONFIG_QNX4FS_FS is not set
    -# CONFIG_SYSV_FS is not set
    -# CONFIG_UFS_FS is not set
    -
    -#
    -# Network File Systems
    -#
    -CONFIG_NFS_FS=y
    -# CONFIG_NFS_V3 is not set
    -# CONFIG_NFS_V4 is not set
    -# CONFIG_NFS_DIRECTIO is not set
    -# CONFIG_NFSD is not set
    -CONFIG_ROOT_NFS=y
    -CONFIG_LOCKD=y
    -# CONFIG_EXPORTFS is not set
    -CONFIG_SUNRPC=y
    -# CONFIG_RPCSEC_GSS_KRB5 is not set
    -# CONFIG_SMB_FS is not set
    -# CONFIG_CIFS is not set
    -# CONFIG_NCP_FS is not set
    -# CONFIG_CODA_FS is not set
    -# CONFIG_INTERMEZZO_FS is not set
    -# CONFIG_AFS_FS is not set
    -
    -#
    -# Partition Types
    -#
    -# CONFIG_PARTITION_ADVANCED is not set
    -CONFIG_MSDOS_PARTITION=y
    -
    -#
    -# Native Language Support
    -#
    -# CONFIG_NLS is not set
    -
    -#
    -# Library routines
    -#
    -CONFIG_CRC32=y
    -
    -#
    -# Kernel hacking
    -#
    -# CONFIG_DEBUG_KERNEL is not set
    -# CONFIG_SERIAL_TEXT_DEBUG is not set
    -
    -#
    -# Security options
    -#
    -# CONFIG_SECURITY is not set
    -
    -#
    -# Cryptographic options
    -#
    -# CONFIG_CRYPTO is not set
    diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
    --- a/arch/ppc/platforms/Makefile
    +++ b/arch/ppc/platforms/Makefile
    @@ -32,7 +32,6 @@ obj-$(CONFIG_KATANA) += katana.o
    obj-$(CONFIG_HDPU) += hdpu.o
    obj-$(CONFIG_MVME5100) += mvme5100.o
    obj-$(CONFIG_PAL4) += pal4_setup.o pal4_pci.o
    -obj-$(CONFIG_PCORE) += pcore.o
    obj-$(CONFIG_POWERPMC250) += powerpmc250.o
    obj-$(CONFIG_PPLUS) += pplus.o
    obj-$(CONFIG_PRPMC750) += prpmc750.o
    diff --git a/arch/ppc/platforms/pcore.c b/arch/ppc/platforms/pcore.c
    deleted file mode 100644
    --- a/arch/ppc/platforms/pcore.c
    +++ /dev/null
    @@ -1,352 +0,0 @@
    -/*
    - * arch/ppc/platforms/pcore_setup.c
    - *
    - * Setup routines for Force PCORE boards
    - *
    - * Author: Matt Porter <mporter@mvista.com>
    - *
    - * 2001 (c) MontaVista, Software, Inc. This file is licensed under
    - * the terms of the GNU General Public License version 2. This program
    - * is licensed "as is" without any warranty of any kind, whether express
    - * or implied.
    - */
    -
    -#include <linux/config.h>
    -#include <linux/stddef.h>
    -#include <linux/kernel.h>
    -#include <linux/init.h>
    -#include <linux/errno.h>
    -#include <linux/reboot.h>
    -#include <linux/pci.h>
    -#include <linux/kdev_t.h>
    -#include <linux/types.h>
    -#include <linux/major.h>
    -#include <linux/initrd.h>
    -#include <linux/console.h>
    -#include <linux/irq.h>
    -#include <linux/seq_file.h>
    -#include <linux/root_dev.h>
    -
    -#include <asm/io.h>
    -#include <asm/machdep.h>
    -#include <asm/time.h>
    -#include <asm/i8259.h>
    -#include <asm/mpc10x.h>
    -#include <asm/todc.h>
    -#include <asm/bootinfo.h>
    -#include <asm/kgdb.h>
    -
    -#include "pcore.h"
    -
    -extern unsigned long loops_per_jiffy;
    -
    -static int board_type;
    -
    -static inline int __init
    -pcore_6750_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
    -{
    - static char pci_irq_table[][4] =
    - /*
    - * PCI IDSEL/INTPIN->INTLINE
    - * A B C D
    - */
    - {
    - {9, 10, 11, 12}, /* IDSEL 24 - DEC 21554 */
    - {10, 0, 0, 0}, /* IDSEL 25 - DEC 21143 */
    - {11, 12, 9, 10}, /* IDSEL 26 - PMC I */
    - {12, 9, 10, 11}, /* IDSEL 27 - PMC II */
    - {0, 0, 0, 0}, /* IDSEL 28 - unused */
    - {0, 0, 9, 0}, /* IDSEL 29 - unused */
    - {0, 0, 0, 0}, /* IDSEL 30 - Winbond */
    - };
    - const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
    - return PCI_IRQ_TABLE_LOOKUP;
    -};
    -
    -static inline int __init
    -pcore_680_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
    -{
    - static char pci_irq_table[][4] =
    - /*
    - * PCI IDSEL/INTPIN->INTLINE
    - * A B C D
    - */
    - {
    - {9, 10, 11, 12}, /* IDSEL 24 - Sentinel */
    - {10, 0, 0, 0}, /* IDSEL 25 - i82559 #1 */
    - {11, 12, 9, 10}, /* IDSEL 26 - PMC I */
    - {12, 9, 10, 11}, /* IDSEL 27 - PMC II */
    - {9, 0, 0, 0}, /* IDSEL 28 - i82559 #2 */
    - {0, 0, 0, 0}, /* IDSEL 29 - unused */
    - {0, 0, 0, 0}, /* IDSEL 30 - Winbond */
    - };
    - const long min_idsel = 24, max_idsel = 30, irqs_per_slot = 4;
    - return PCI_IRQ_TABLE_LOOKUP;
    -};
    -
    -void __init
    -pcore_pcibios_fixup(void)
    -{
    - struct pci_dev *dev;
    -
    - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
    - PCI_DEVICE_ID_WINBOND_83C553,
    - 0)))
    - {
    - /* Reroute interrupts both IDE channels to 15 */
    - pci_write_config_byte(dev,
    - PCORE_WINBOND_IDE_INT,
    - 0xff);
    -
    - /* Route INTA-D to IRQ9-12, respectively */
    - pci_write_config_word(dev,
    - PCORE_WINBOND_PCI_INT,
    - 0x9abc);
    -
    - /*
    - * Set up 8259 edge/level triggering
    - */
    - outb(0x00, PCORE_WINBOND_PRI_EDG_LVL);
    - outb(0x1e, PCORE_WINBOND_SEC_EDG_LVL);
    - pci_dev_put(dev);
    - }
    -}
    -
    -int __init
    -pcore_find_bridges(void)
    -{
    - struct pci_controller* hose;
    - int host_bridge, board_type;
    -
    - hose = pcibios_alloc_controller();
    - if (!hose)
    - return 0;
    -
    - mpc10x_bridge_init(hose,
    - MPC10X_MEM_MAP_B,
    - MPC10X_MEM_MAP_B,
    - MPC10X_MAPB_EUMB_BASE);
    -
    - /* Determine board type */
    - early_read_config_dword(hose,
    - 0,
    - PCI_DEVFN(0,0),
    - PCI_VENDOR_ID,
    - &host_bridge);
    - if (host_bridge == MPC10X_BRIDGE_106)
    - board_type = PCORE_TYPE_6750;
    - else /* MPC10X_BRIDGE_107 */
    - board_type = PCORE_TYPE_680;
    -
    - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
    -
    - ppc_md.pcibios_fixup = pcore_pcibios_fixup;
    - ppc_md.pci_swizzle = common_swizzle;
    -
    - if (board_type == PCORE_TYPE_6750)
    - ppc_md.pci_map_irq = pcore_6750_map_irq;
    - else /* PCORE_TYPE_680 */
    - ppc_md.pci_map_irq = pcore_680_map_irq;
    -
    - return board_type;
    -}
    -
    -/* Dummy variable to satisfy mpc10x_common.o */
    -void *OpenPIC_Addr;
    -
    -static int
    -pcore_show_cpuinfo(struct seq_file *m)
    -{
    - seq_printf(m, "vendor\t\t: Force Computers\n");
    -
    - if (board_type == PCORE_TYPE_6750)
    - seq_printf(m, "machine\t\t: PowerCore 6750\n");
    - else /* PCORE_TYPE_680 */
    - seq_printf(m, "machine\t\t: PowerCore 680\n");
    -
    - seq_printf(m, "L2\t\t: " );
    - if (board_type == PCORE_TYPE_6750)
    - switch (readb(PCORE_DCCR_REG) & PCORE_DCCR_L2_MASK)
    - {
    - case PCORE_DCCR_L2_0KB:
    - seq_printf(m, "nocache");
    - break;
    - case PCORE_DCCR_L2_256KB:
    - seq_printf(m, "256KB");
    - break;
    - case PCORE_DCCR_L2_1MB:
    - seq_printf(m, "1MB");
    - break;
    - case PCORE_DCCR_L2_512KB:
    - seq_printf(m, "512KB");
    - break;
    - default:
    - seq_printf(m, "error");
    - break;
    - }
    - else /* PCORE_TYPE_680 */
    - switch (readb(PCORE_DCCR_REG) & PCORE_DCCR_L2_MASK)
    - {
    - case PCORE_DCCR_L2_2MB:
    - seq_printf(m, "2MB");
    - break;
    - case PCORE_DCCR_L2_256KB:
    - seq_printf(m, "reserved");
    - break;
    - case PCORE_DCCR_L2_1MB:
    - seq_printf(m, "1MB");
    - break;
    - case PCORE_DCCR_L2_512KB:
    - seq_printf(m, "512KB");
    - break;
    - default:
    - seq_printf(m, "error");
    - break;
    - }
    -
    - seq_printf(m, "\n");
    -
    - return 0;
    -}
    -
    -static void __init
    -pcore_setup_arch(void)
    -{
    - /* init to some ~sane value until calibrate_delay() runs */
    - loops_per_jiffy = 50000000/HZ;
    -
    - /* Lookup PCI host bridges */
    - board_type = pcore_find_bridges();
    -
    -#ifdef CONFIG_BLK_DEV_INITRD
    - if (initrd_start)
    - ROOT_DEV = Root_RAM0;
    - else
    -#endif
    -#ifdef CONFIG_ROOT_NFS
    - ROOT_DEV = Root_NFS;
    -#else
    - ROOT_DEV = Root_SDA2;
    -#endif
    -
    - printk(KERN_INFO "Force PowerCore ");
    - if (board_type == PCORE_TYPE_6750)
    - printk("6750\n");
    - else
    - printk("680\n");
    - printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
    - _set_L2CR(L2CR_L2E | _get_L2CR());
    -
    -}
    -
    -static void
    -pcore_restart(char *cmd)
    -{
    - local_irq_disable();
    - /* Hard reset */
    - writeb(0x11, 0xfe000332);
    - while(1);
    -}
    -
    -static void
    -pcore_halt(void)
    -{
    - local_irq_disable();
    - /* Turn off user LEDs */
    - writeb(0x00, 0xfe000300);
    - while (1);
    -}
    -
    -static void
    -pcore_power_off(void)
    -{
    - pcore_halt();
    -}
    -
    -
    -static void __init
    -pcore_init_IRQ(void)
    -{
    - int i;
    -
    - for ( i = 0 ; i < 16 ; i++ )
    - irq_desc[i].handler = &i8259_pic;
    -
    - i8259_init(0);
    -}
    -
    -/*
    - * Set BAT 3 to map 0xf0000000 to end of physical memory space.
    - */
    -static __inline__ void
    -pcore_set_bat(void)
    -{
    - mb();
    - mtspr(SPRN_DBAT3U, 0xf0001ffe);
    - mtspr(SPRN_DBAT3L, 0xfe80002a);
    - mb();
    -
    -}
    -
    -static unsigned long __init
    -pcore_find_end_of_memory(void)
    -{
    -
    - return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
    -}
    -
    -static void __init
    -pcore_map_io(void)
    -{
    - io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
    -}
    -
    -TODC_ALLOC();
    -
    -void __init
    -platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
    - unsigned long r6, unsigned long r7)
    -{
    - parse_bootinfo(find_bootinfo());
    -
    - /* Cover I/O space with a BAT */
    - /* yuck, better hope your ram size is a power of 2 -- paulus */
    - pcore_set_bat();
    -
    - isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
    - isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
    - pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
    -
    - ppc_md.setup_arch = pcore_setup_arch;
    - ppc_md.show_cpuinfo = pcore_show_cpuinfo;
    - ppc_md.init_IRQ = pcore_init_IRQ;
    - ppc_md.get_irq = i8259_irq;
    -
    - ppc_md.find_end_of_memory = pcore_find_end_of_memory;
    - ppc_md.setup_io_mappings = pcore_map_io;
    -
    - ppc_md.restart = pcore_restart;
    - ppc_md.power_off = pcore_power_off;
    - ppc_md.halt = pcore_halt;
    -
    - TODC_INIT(TODC_TYPE_MK48T59,
    - PCORE_NVRAM_AS0,
    - PCORE_NVRAM_AS1,
    - PCORE_NVRAM_DATA,
    - 8);
    -
    - ppc_md.time_init = todc_time_init;
    - ppc_md.get_rtc_time = todc_get_rtc_time;
    - ppc_md.set_rtc_time = todc_set_rtc_time;
    - ppc_md.calibrate_decr = todc_calibrate_decr;
    -
    - ppc_md.nvram_read_val = todc_m48txx_read_val;
    - ppc_md.nvram_write_val = todc_m48txx_write_val;
    -
    -#ifdef CONFIG_SERIAL_TEXT_DEBUG
    - ppc_md.progress = gen550_progress;
    -#endif
    -#ifdef CONFIG_KGDB
    - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
    -#endif
    -}
    diff --git a/arch/ppc/platforms/pcore.h b/arch/ppc/platforms/pcore.h
    deleted file mode 100644
    --- a/arch/ppc/platforms/pcore.h
    +++ /dev/null
    @@ -1,39 +0,0 @@
    -/*
    - * arch/ppc/platforms/pcore.h
    - *
    - * Definitions for Force PowerCore board support
    - *
    - * Author: Matt Porter <mporter@mvista.com>
    - *
    - * 2001 (c) MontaVista, Software, Inc. This file is licensed under
    - * the terms of the GNU General Public License version 2. This program
    - * is licensed "as is" without any warranty of any kind, whether express
    - * or implied.
    - */
    -
    -#ifndef __PPC_PLATFORMS_PCORE_H
    -#define __PPC_PLATFORMS_PCORE_H
    -
    -#include <asm/mpc10x.h>
    -
    -#define PCORE_TYPE_6750 1
    -#define PCORE_TYPE_680 2
    -
    -#define PCORE_NVRAM_AS0 0x73
    -#define PCORE_NVRAM_AS1 0x75
    -#define PCORE_NVRAM_DATA 0x77
    -
    -#define PCORE_DCCR_REG (MPC10X_MAPB_ISA_IO_BASE + 0x308)
    -#define PCORE_DCCR_L2_MASK 0xc0
    -#define PCORE_DCCR_L2_0KB 0x00
    -#define PCORE_DCCR_L2_256KB 0x40
    -#define PCORE_DCCR_L2_512KB 0xc0
    -#define PCORE_DCCR_L2_1MB 0x80
    -#define PCORE_DCCR_L2_2MB 0x00
    -
    -#define PCORE_WINBOND_IDE_INT 0x43
    -#define PCORE_WINBOND_PCI_INT 0x44
    -#define PCORE_WINBOND_PRI_EDG_LVL 0x4d0
    -#define PCORE_WINBOND_SEC_EDG_LVL 0x4d1
    -
    -#endif /* __PPC_PLATFORMS_PCORE_H */
    diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
    --- a/arch/ppc/syslib/Makefile
    +++ b/arch/ppc/syslib/Makefile
    @@ -59,7 +59,6 @@ obj-$(CONFIG_MVME5100) += open_pic.o to
    obj-$(CONFIG_MVME5100_IPMC761_PRESENT) += i8259.o
    obj-$(CONFIG_OCOTEA) += indirect_pci.o pci_auto.o todc_time.o
    obj-$(CONFIG_PAL4) += cpc700_pic.o
    -obj-$(CONFIG_PCORE) += todc_time.o i8259.o pci_auto.o
    obj-$(CONFIG_POWERPMC250) += pci_auto.o
    obj-$(CONFIG_PPLUS) += hawk_common.o open_pic.o i8259.o \
    indirect_pci.o todc_time.o pci_auto.o
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2005-07-27 17:51    [W:0.084 / U:0.084 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site