Messages in this thread | | | Date | Mon, 25 Jul 2005 16:14:11 -0400 | From | Bill Davidsen <> | Subject | Re: Power consumption HZ250 vs. HZ1000 |
| |
Marc Ballarin wrote: > Hi, > I did some measurements in order to compare power drain with HZ250 and > HZ1000. > To measure the actual drain, I used the "smart" battery's internal measurement. > (Available with acpi-sbs in /proc/acpi/sbs/SBS0/SB0/state.) > No clue how accurate this is. > > Here some battery details, in case someone knows: > charge reporting error: 25% > SB specification: v1.1 (with PEC) > manufacturer name: Panasonic > manufacture date: 2004-11-27 > device name: 02ZL > device chemistry: Lion > > Kernel: 2.6.13-rc3-mm1 + acpi-sbs > > CPU: > cpu family : 6 > model : 13 > model name : Intel(R) Pentium(R) M processor 1.60GHz > stepping : 6 > > The "ondemand" governor was running, using acpi_cpufreq. (Idle at 600MHz). > > Systems was running X11/KDE to get a more or less realistic scenario. No > cron jobs, network traffic or additional applications. WLAN and built-in > display were disabled completely, all fans and LEDs were off, internal hard > disc was running. Additional peripherals: external keyboard, mouse, display > and externally-powered hard disk (USB). > > The results are quite simple: > In both configurations the current settles between 727-729 mA > (Voltage ~16.5 V). > > Some issues: > > - C-states look strange: > active state: C2 > max_cstate: C8 > bus master activity: 00887fff > states: > C1: type[C1] promotion[C2] demotion[--] latency[000] usage[00000010] > *C2: type[C2] promotion[C3] demotion[C1] latency[001] usage[01367471] > C3: type[C3] promotion[--] demotion[C2] latency[085] usage[00000000] > > - I don't know, how much polling of the battery affects results. Reads always > block for ~10 seconds, and I used this behaviour for rate-limiting. > > - Is this approach valid at all? > > - I could repeat the test in single user mode with internal hard disc turned off. > I think what you did is the most valid test. Testing with any configuration other than the one you actually use may give some specious appearance of saving, but unless you actually use the system in the reduced configuration I don't see how you would save anything by going to the lower clock.
A configuration without any external kb/mouse connections would be something which many people do use, so that would be meaningful to some people if not you. I'm guessing it won't change much, but to satisfy the people who think USB precludes power saving you could make the test.
-- -bill davidsen (davidsen@tmr.com) "The secret to procrastination is to put things off until the last possible moment - but no longer" -me - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |