lkml.org 
[lkml]   [2005]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 05/24] Add usb_to_input_id
Input: introduce usb_to_input_id() to uniformly produce
struct input_id for USB input devices.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

drivers/usb/input/acecad.c | 6 ++----
drivers/usb/input/aiptek.c | 6 ++----
drivers/usb/input/ati_remote.c | 8 +++-----
drivers/usb/input/hid-input.c | 6 ++----
drivers/usb/input/itmtouch.c | 6 ++----
drivers/usb/input/kbtab.c | 6 ++----
drivers/usb/input/mtouchusb.c | 6 ++----
drivers/usb/input/powermate.c | 6 ++----
drivers/usb/input/touchkitusb.c | 7 ++-----
drivers/usb/input/usbkbd.c | 6 ++----
drivers/usb/input/usbmouse.c | 6 ++----
drivers/usb/input/wacom.c | 6 ++----
drivers/usb/input/xpad.c | 6 ++----
drivers/usb/media/konicawc.c | 6 ++----
include/linux/usb_input.h | 25 +++++++++++++++++++++++++
15 files changed, 54 insertions(+), 58 deletions(-)

Index: work/drivers/usb/input/acecad.c
===================================================================
--- work.orig/drivers/usb/input/acecad.c
+++ work/drivers/usb/input/acecad.c
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

/*
* Version Information
@@ -212,10 +213,7 @@ static int usb_acecad_probe(struct usb_i

acecad->dev.name = acecad->name;
acecad->dev.phys = acecad->phys;
- acecad->dev.id.bustype = BUS_USB;
- acecad->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- acecad->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
- acecad->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &acecad->dev.id);
acecad->dev.dev = &intf->dev;

usb_fill_int_urb(acecad->irq, dev, pipe,
Index: work/drivers/usb/input/aiptek.c
===================================================================
--- work.orig/drivers/usb/input/aiptek.c
+++ work/drivers/usb/input/aiptek.c
@@ -77,6 +77,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include <linux/sched.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
@@ -2125,10 +2126,7 @@ aiptek_probe(struct usb_interface *intf,
aiptek->inputdev.absflat[ABS_WHEEL] = 0;
aiptek->inputdev.name = "Aiptek";
aiptek->inputdev.phys = aiptek->features.usbPath;
- aiptek->inputdev.id.bustype = BUS_USB;
- aiptek->inputdev.id.vendor = le16_to_cpu(usbdev->descriptor.idVendor);
- aiptek->inputdev.id.product = le16_to_cpu(usbdev->descriptor.idProduct);
- aiptek->inputdev.id.version = le16_to_cpu(usbdev->descriptor.bcdDevice);
+ usb_to_input_id(usbdev, &aiptek->inputdev.id);
aiptek->inputdev.dev = &intf->dev;

aiptek->usbdev = usbdev;
Index: work/drivers/usb/input/usbkbd.c
===================================================================
--- work.orig/drivers/usb/input/usbkbd.c
+++ work/drivers/usb/input/usbkbd.c
@@ -32,6 +32,7 @@
#include <linux/input.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

/*
* Version Information
@@ -288,10 +289,7 @@ static int usb_kbd_probe(struct usb_inte

kbd->dev.name = kbd->name;
kbd->dev.phys = kbd->phys;
- kbd->dev.id.bustype = BUS_USB;
- kbd->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- kbd->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
- kbd->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &kbd->dev.id);
kbd->dev.dev = &iface->dev;

if (dev->manufacturer)
Index: work/drivers/usb/input/usbmouse.c
===================================================================
--- work.orig/drivers/usb/input/usbmouse.c
+++ work/drivers/usb/input/usbmouse.c
@@ -32,6 +32,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

/*
* Version Information
@@ -171,10 +172,7 @@ static int usb_mouse_probe(struct usb_in

mouse->dev.name = mouse->name;
mouse->dev.phys = mouse->phys;
- mouse->dev.id.bustype = BUS_USB;
- mouse->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- mouse->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
- mouse->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &mouse->dev.id);
mouse->dev.dev = &intf->dev;

if (dev->manufacturer)
Index: work/drivers/usb/input/wacom.c
===================================================================
--- work.orig/drivers/usb/input/wacom.c
+++ work/drivers/usb/input/wacom.c
@@ -69,6 +69,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>

@@ -823,10 +824,7 @@ static int wacom_probe(struct usb_interf

wacom->dev.name = wacom->features->name;
wacom->dev.phys = wacom->phys;
- wacom->dev.id.bustype = BUS_USB;
- wacom->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- wacom->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
- wacom->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &wacom->dev.id);
wacom->dev.dev = &intf->dev;
wacom->usbdev = dev;

Index: work/drivers/usb/input/ati_remote.c
===================================================================
--- work.orig/drivers/usb/input/ati_remote.c
+++ work/drivers/usb/input/ati_remote.c
@@ -94,6 +94,7 @@
#include <linux/moduleparam.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include <linux/wait.h>

/*
@@ -635,11 +636,8 @@ static void ati_remote_input_init(struct
idev->name = ati_remote->name;
idev->phys = ati_remote->phys;

- idev->id.bustype = BUS_USB;
- idev->id.vendor = le16_to_cpu(ati_remote->udev->descriptor.idVendor);
- idev->id.product = le16_to_cpu(ati_remote->udev->descriptor.idProduct);
- idev->id.version = le16_to_cpu(ati_remote->udev->descriptor.bcdDevice);
- idev->dev = &(ati_remote->udev->dev);
+ usb_to_input_id(ati_remote->udev, &idev->id);
+ idev->dev = &ati_remote->udev->dev;
}

static int ati_remote_initialize(struct ati_remote *ati_remote)
Index: work/drivers/usb/input/hid-input.c
===================================================================
--- work.orig/drivers/usb/input/hid-input.c
+++ work/drivers/usb/input/hid-input.c
@@ -31,6 +31,7 @@
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

#undef DEBUG

@@ -581,10 +582,7 @@ int hidinput_connect(struct hid_device *
hidinput->input.name = hid->name;
hidinput->input.phys = hid->phys;
hidinput->input.uniq = hid->uniq;
- hidinput->input.id.bustype = BUS_USB;
- hidinput->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- hidinput->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
- hidinput->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &hidinput->input.id);
hidinput->input.dev = &hid->intf->dev;
}

Index: work/drivers/usb/input/itmtouch.c
===================================================================
--- work.orig/drivers/usb/input/itmtouch.c
+++ work/drivers/usb/input/itmtouch.c
@@ -53,6 +53,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

/* only an 8 byte buffer necessary for a single packet */
#define ITM_BUFSIZE 8
@@ -184,10 +185,7 @@ static int itmtouch_probe(struct usb_int

itmtouch->inputdev.name = itmtouch->name;
itmtouch->inputdev.phys = itmtouch->phys;
- itmtouch->inputdev.id.bustype = BUS_USB;
- itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
- itmtouch->inputdev.id.product = udev->descriptor.idProduct;
- itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+ usb_to_input_id(udev, &itmtouch->inputdev.id);
itmtouch->inputdev.dev = &intf->dev;

if (!strlen(itmtouch->name))
Index: work/drivers/usb/input/kbtab.c
===================================================================
--- work.orig/drivers/usb/input/kbtab.c
+++ work/drivers/usb/input/kbtab.c
@@ -4,6 +4,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>

@@ -167,10 +168,7 @@ static int kbtab_probe(struct usb_interf

kbtab->dev.name = "KB Gear Tablet";
kbtab->dev.phys = kbtab->phys;
- kbtab->dev.id.bustype = BUS_USB;
- kbtab->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- kbtab->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
- kbtab->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &kbtab->dev.id);
kbtab->dev.dev = &intf->dev;
kbtab->usbdev = dev;

Index: work/drivers/usb/input/mtouchusb.c
===================================================================
--- work.orig/drivers/usb/input/mtouchusb.c
+++ work/drivers/usb/input/mtouchusb.c
@@ -53,6 +53,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

#define MTOUCHUSB_MIN_XC 0x0
#define MTOUCHUSB_MAX_RAW_XC 0x4000
@@ -232,10 +233,7 @@ static int mtouchusb_probe(struct usb_in

mtouch->input.name = mtouch->name;
mtouch->input.phys = mtouch->phys;
- mtouch->input.id.bustype = BUS_USB;
- mtouch->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- mtouch->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
- mtouch->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+ usb_to_input_id(udev, &mtouch->input.id);
mtouch->input.dev = &intf->dev;

mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
Index: work/drivers/usb/input/powermate.c
===================================================================
--- work.orig/drivers/usb/input/powermate.c
+++ work/drivers/usb/input/powermate.c
@@ -35,6 +35,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

#define POWERMATE_VENDOR 0x077d /* Griffin Technology, Inc. */
#define POWERMATE_PRODUCT_NEW 0x0410 /* Griffin PowerMate */
@@ -389,10 +390,7 @@ static int powermate_probe(struct usb_in
pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
- pm->input.id.bustype = BUS_USB;
- pm->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- pm->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
- pm->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+ usb_to_input_id(udev, &pm->input.id);
pm->input.event = powermate_input_event;
pm->input.dev = &intf->dev;
pm->input.phys = pm->phys;
Index: work/drivers/usb/input/touchkitusb.c
===================================================================
--- work.orig/drivers/usb/input/touchkitusb.c
+++ work/drivers/usb/input/touchkitusb.c
@@ -35,7 +35,7 @@
#define DEBUG
#endif
#include <linux/usb.h>
-
+#include <linux/usb_input.h>

#define TOUCHKIT_MIN_XC 0x0
#define TOUCHKIT_MAX_XC 0x07ff
@@ -202,10 +202,7 @@ static int touchkit_probe(struct usb_int

touchkit->input.name = touchkit->name;
touchkit->input.phys = touchkit->phys;
- touchkit->input.id.bustype = BUS_USB;
- touchkit->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- touchkit->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
- touchkit->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+ usb_to_input_id(udev, &touchkit->input.id);
touchkit->input.dev = &intf->dev;

touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
Index: work/drivers/usb/input/xpad.c
===================================================================
--- work.orig/drivers/usb/input/xpad.c
+++ work/drivers/usb/input/xpad.c
@@ -62,6 +62,7 @@
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>

#define DRIVER_VERSION "v0.0.5"
#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
@@ -256,10 +257,7 @@ static int xpad_probe(struct usb_interfa

xpad->udev = udev;

- xpad->dev.id.bustype = BUS_USB;
- xpad->dev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- xpad->dev.id.product = le16_to_cpu(udev->descriptor.idProduct);
- xpad->dev.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+ usb_to_input_id(udev, &xpad->dev.id);
xpad->dev.dev = &intf->dev;
xpad->dev.private = xpad;
xpad->dev.name = xpad_device[i].name;
Index: work/include/linux/usb_input.h
===================================================================
--- /dev/null
+++ work/include/linux/usb_input.h
@@ -0,0 +1,25 @@
+#ifndef __USB_INPUT_H
+#define __USB_INPUT_H
+
+/*
+ * Copyright (C) 2005 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <asm/byteorder.h>
+
+static inline void
+usb_to_input_id(const struct usb_device *dev, struct input_id *id)
+{
+ id->bustype = BUS_USB;
+ id->vendor = le16_to_cpu(dev->descriptor.idVendor);
+ id->product = le16_to_cpu(dev->descriptor.idProduct);
+ id->version = le16_to_cpu(dev->descriptor.bcdDevice);
+}
+
+#endif
Index: work/drivers/usb/media/konicawc.c
===================================================================
--- work.orig/drivers/usb/media/konicawc.c
+++ work/drivers/usb/media/konicawc.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/input.h>
+#include <linux/usb_input.h>

#include "usbvideo.h"

@@ -845,10 +846,7 @@ static int konicawc_probe(struct usb_int
cam->input.private = cam;
cam->input.evbit[0] = BIT(EV_KEY);
cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
- cam->input.id.bustype = BUS_USB;
- cam->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
- cam->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
- cam->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+ usb_to_input_id(dev, &cam->input.id);
input_register_device(&cam->input);

usb_make_path(dev, cam->input_physname, 56);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-25 08:08    [W:0.040 / U:36.772 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site