[lkml]   [2005]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: DriveStatusError BadCRC
I already used 80-wire cable and my Maxtor HD plugs are seated properly.
My Kernel is 2.6.12-1.1372 on Fedora Core 3
HD is 80 GB Maxtor ATA/133
With hdparm command I can see hda is set in "udma5" mode, but why is'it not
udma6 (133 Mhz) ? Can it be problem ?!


>-- Messaggio Originale --
>Date: Fri, 22 Jul 2005 10:48:05 +0200
>From: Matthias Andree <>
>Subject: Re: DriveStatusError BadCRC
>On Fri, 22 Jul 2005, wrote:
>> I bought new Maxtor HD 80 GB but somthing Fedora Core 3 crashes giving
>> message:
>> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
>> hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
>> How can I solve it ?
>Check your hardware. ATA cables must not exceed 45 cm in length; for
>Ultra DMA 4, 5 or 6 (66 MByte/s and faster), you need to use 80-wire
>cables (they need extra ground lines for shielding), and check if all
>plugs are seated properly.
>WRT the backtrace you showed, someone else will have to answer - which
>kernel version are you using? If it's a Fedora-patched kernel, report
>the problem to the Fedora project. If it's an older unmodified kernel,
>retry with a newer kernel ( first and see if the problem is
>still present.
>Matthias Andree
>To unsubscribe from this list: send the line "unsubscribe linux-kernel"
>the body of a message to
>More majordomo info at
>Please read the FAQ at

Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Telecom
a partire da 19,95 Euro/mese.
Attivala entro il 28 luglio, il primo MESE è GRATIS! CLICCA QUI.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-07-22 11:19    [W:0.031 / U:3.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site