Messages in this thread | | | Subject | Re: often ide errors on amd64 / A8N-SLI | From | Alan Cox <> | Date | Thu, 21 Jul 2005 20:30:13 +0100 |
| |
On Iau, 2005-07-21 at 19:26 +0200, jurriaan wrote: > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
There was corruption on the cable between the controller and drive. That usually indicates a cable or noise problem in the PC but could indicate mistuning of the interface. Make sure the IDE cable is
[controller]<---- long section ----->[slave]--short section-->[master]
as one common cause is having the cable the other way around.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |