[lkml]   [2005]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 2.6.13-rc1 03/10] IOCHK interface for I/O error handling/detecting

> Are you assuming that a device driver will use an iochk_read() for
> every DMA operation? for every MMIO to the card?
> For high performance devices, it seems to me that this will cause
> a rather large performance burden, especially if its envisioned that
> all architectures will do something similar.
> My concern is that (at least on ppc64) the call pci_read_config_word()
> requires a call into "firmware" aka "BIOS", which takes thousands upon
> thousands of cpu cycles. There are hundreds of cycles of gratuitous
> crud just to get into the firmware, and then lord-knows-what the
> firmware does while its in there; probably doing all sorts of crazy
> math to compute bus addresses and other arcane things. I would imagine
> that most architectures, includig ia64, are similar.
> Thus, one wouldn't want to perform an iochk_read() in this way unless
> one was already pretty sure that an error had already occured ...
> Am I misunderstanding something?

I would expect pSeries not to use the "default" error checking (that
tests the status register) but rather use EEH.


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-07-13 02:25    [W:0.053 / U:37.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site