Messages in this thread | | | Date | Tue, 12 Jul 2005 19:00:37 +0300 (EEST) | From | Tero Roponen <> | Subject | Re: [SOLVED] Re: 2.6.13-rc2 hangs at boot |
| |
On Tue, 12 Jul 2005, Ivan Kokshaysky wrote:
> On Fri, Jul 08, 2005 at 03:54:00PM +0200, Mikael Pettersson wrote: > > Same here: 2.6.13-rc2 vanilla and 2.6.13-rc2 + patch #2 above both hang, > > but 2.6.13-rc2 + patch #1 boots fine. > > I suspect that those larger (4K) cardbus IO windows are clashing with > some legacy IO ports. If so, this could be avoided by setting ISAEN > bridge control bit. > It would be interesting to see whether the patch below works or not... > > Ivan.
Hi,
I tried 2.6.13-rc2-git5 with your patch.
First I forgot to install modules and it booted fine. Then I did a 'sudo make modules_install' and rebooted. It hang.
It seems that everything is fine until some module loads and does something.
- Tero Roponen
ps.
In 2.6.12 lsmod gives me this:
Module Size Used by xirc2ps_cs 15728 1 pcmcia 21416 5 xirc2ps_cs sunrpc 128132 1 binfmt_misc 9352 1 yenta_socket 20360 3 rsrc_nonstatic 11488 1 yenta_socket pcmcia_core 44280 4 xirc2ps_cs,pcmcia,yenta_socket,rsrc_nonstatic snd_cs4236 13700 0 snd_opl3_lib 9152 1 snd_cs4236 snd_hwdep 7104 1 snd_opl3_lib snd_cs4236_lib 15008 1 snd_cs4236 snd_mpu401_uart 6048 1 snd_cs4236 snd_rawmidi 20832 1 snd_mpu401_uart snd_cs4231_lib 23808 2 snd_cs4236,snd_cs4236_lib snd_seq_oss 33088 0 snd_seq_midi_event 6496 1 snd_seq_oss snd_seq 50416 4 snd_seq_oss,snd_seq_midi_event snd_seq_device 6892 4 snd_opl3_lib,snd_rawmidi,snd_seq_oss,snd_seq snd_pcm_oss 50400 0 snd_mixer_oss 17696 1 snd_pcm_oss snd_pcm 85096 3 snd_cs4236_lib,snd_cs4231_lib,snd_pcm_oss snd_timer 21924 4 snd_opl3_lib,snd_cs4231_lib,snd_seq,snd_pcm snd 48388 14 snd_cs4236,snd_opl3_lib,snd_hwdep,snd_cs4236_lib,snd_mpu401_uart,snd_rawmidi,snd_cs4231_lib,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 7456 1 snd snd_page_alloc 7556 2 snd_cs4231_lib,snd_pcm floppy 54772 0 ide_cd 38436 0 cdrom 38272 1 ide_cd evdev 7456 0
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |