lkml.org 
[lkml]   [2005]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecttg3 fails with x86_64 (but works with i386)
Hi,

I've two 3com 3C996B-T network cards (lspci says it's
a Broadcom BCM5701 chip) in Asus A8V boards with an
AMD64 4000+ cpu. Booting a x86_64 version of the
2.6.12.2 kernel, the tg3 module complains

tg3.c: v3.31 (June 8, 2005)
tg3_test_dma() Write the buffer failed -19
tg3: DMA engine test failed, aborting.

and no eth0 is available. However, when booting a 32bit
version of 2.6.12.2, the cards work well with the tg3
module. So it must be some problem in the x86_64
specific kernel code.

Any ideas what I could do? What further information can
I provide?

cu,
Frank

--
Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17 Phone: +49 89 2180-4049
80333 Muenchen, Germany Fax: +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-11 09:35    [W:0.027 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site