lkml.org 
[lkml]   [2005]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH scsi-misc 2/2] megaraid_sas: LSI Logic MegaRAID SAS RA ID D river
Date
This is very embarrassing. The patch is mangled again! Before mailing this
to
mailing list, I have mailed it to myself and verified that it applies
cleanly.
Does anyone know why my patches are getting mangled only when I send them to
kernel mailing list?

Sreenivas

>-----Original Message-----
>From: Bagalkote, Sreenivas [mailto:sreenib@lsil.com]
>Sent: Saturday, June 04, 2005 1:27 AM
>To: 'Christoph Hellwig'; 'James Bottomley'
>Cc: 'linux-scsi@vger.kernel.org';
>'linux-kernel@vger.kernel.org'; 'Matt_Domsch@Dell.com';
>Doelfel, Hardy; Ju, Seokmann
>Subject: [PATCH scsi-misc 2/2] megaraid_sas: LSI Logic
>MegaRAID SAS RAID D river
>
>
>Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
>
>diff -Naur scsi-misc.b/drivers/scsi/megaraid/megaraid_sas.c
>scsi-misc.c/drivers/scsi/megaraid/megaraid_sas.c
>--- scsi-misc.b/drivers/scsi/megaraid/megaraid_sas.c 1969-12-31
>19:00:00.000000000 -0500
>+++ scsi-misc.c/drivers/scsi/megaraid/megaraid_sas.c 2005-06-03
>20:36:06.657461568 -0400
>@@ -0,0 +1,3437 @@
>+/*
>+ *
>+ * Linux MegaRAID driver for SAS based RAID controllers
>+ *
>+ * Copyright (c) 2003-2005 LSI Logic Corporation.
>+ *
>+ * This program is free software; you can redistribute it and/or
>+ * modify it under the terms of the GNU General Public License
>+ * as published by the Free Software Foundation; either version
>+ * 2 of the License, or (at your option) any later version.
>+ *
>+ * FILE : megaraid_sas.c
>+ * Version : v00.00.01.03-rc1
>+ *
>+ * Authors:
>+ * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
>+ *
>+ * List of supported controllers
>+ *
>+ * OEM Product Name VID DID
>SSVID SSID
>+ * --- ------------ --- ---
>---- ----
>+ */
>+
>+#include <linux/kernel.h>
>+#include <linux/types.h>
>+#include <linux/pci.h>
>+#include <linux/list.h>
>+#include <linux/version.h>
>+#include <linux/moduleparam.h>
>+#include <linux/module.h>
>+#include <linux/spinlock.h>
>+#include <linux/interrupt.h>
>+#include <linux/delay.h>
>+#include <asm/uaccess.h>
>+
>+#include <scsi/scsi.h>
>+#include <scsi/scsi_cmnd.h>
>+#include <scsi/scsi_device.h>
>+#include <scsi/scsi_host.h>
>+#include "megaraid_sas.h"
>+
>+MODULE_LICENSE("GPL");
>+MODULE_VERSION(MEGASAS_VERSION);
>+MODULE_AUTHOR("sreenivas.bagalkote@lsil.com");
>+MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver");
>+
>+/*
>+ * PCI ID table for all supported controllers
>+ */
>+static struct pci_device_id megasas_pci_table[] = {
>+
>+ {
>+ PCI_VENDOR_ID_LSI_LOGIC,
>+ PCI_DEVICE_ID_LSI_SAS1064R,
>+ PCI_ANY_ID,
>+ PCI_ANY_ID,
>+ },
>+ {
>+ PCI_VENDOR_ID_DELL,
>+ PCI_DEVICE_ID_DELL_PERC5,
>+ PCI_ANY_ID,
>+ PCI_ANY_ID,
>+ },
>+ { 0 } /* Terminating entry */
>+};
>+
>+MODULE_DEVICE_TABLE(pci, megasas_pci_table);
>+
>+static int megasas_mgmt_majorno;
>+static struct megasas_mgmt_info megasas_mgmt_info;
>+static struct fasync_struct *megasas_async_queue;
>+static DECLARE_MUTEX(megasas_async_queue_mutex);
>+
>+/**
>+ * megasas_get_cmd - Get a command from the free pool
>+ * @instance: Adapter soft state
>+ *
>+ * Returns a free command from the pool
>+ */
>+static inline struct megasas_cmd*
>+megasas_get_cmd(struct megasas_instance *instance)
>+{
>+ unsigned long flags;
>+ struct megasas_cmd *cmd = NULL;
>+
>+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
>+
>+ if (!list_empty(&instance->cmd_pool)) {
>+ cmd = list_entry((&instance->cmd_pool)->next,
>+ struct megasas_cmd, list);
>+ list_del_init( &cmd->list );
>+ }
>+
>+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
>+ return cmd;
>+}
>+
>+/**
>+ * megasas_return_cmd - Return a cmd to free command pool
>+ * @instance: Adapter soft state
>+ * @cmd: Command packet to be returned to free
>command pool
>+ */
>+static inline void
>+megasas_return_cmd(struct megasas_instance *instance, struct
>megasas_cmd
>*cmd)
>+{
>+ unsigned long flags;
>+
>+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
>+
>+ list_add(&cmd->list, &instance->cmd_pool);
>+
>+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
>+}
>+
>+/**
>+ * megasas_enable_intr - Enables interrupts
>+ * @regs: MFI register set
>+ */
>+static inline void
>+megasas_enable_intr(struct megasas_register_set *regs)
>+{
>+ writel(1, &(regs)->outbound_intr_mask);
>+
>+ /* Dummy readl to force pci flush */
>+ readl(&regs->outbound_intr_mask);
>+}
>+
>+/**
>+ * megasas_disable_intr - Disables interrupts
>+ * @regs: MFI register set
>+ */
>+static inline void
>+megasas_disable_intr(struct megasas_register_set *regs)
>+{
>+ u32 mask = readl(&regs->outbound_intr_mask) & (~0x00000001);
>+ writel(mask, &regs->outbound_intr_mask);
>+
>+ /* Dummy readl to force pci flush */
>+ readl(&regs->outbound_intr_mask);
>+}
>+
>+
>+/**
>+ * megasas_issue_polled - Issues a polling command
>+ * @instance: Adapter soft state
>+ * @cmd: Command packet to be issued
>+ *
>+ * For polling, MFI requires the cmd_status to be set to 0xFF before
>posting.
>+ */
>+static int
>+megasas_issue_polled(struct megasas_instance *instance,
>struct megasas_cmd
>*cmd)
>+{
>+ int i;
>+ u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
>+
>+ struct megasas_header *frame_hdr = &cmd->frame->hdr;
>+
>+ frame_hdr->cmd_status = 0xFF;
>+ frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
>+
>+ /*
>+ * Issue the frame using inbound queue port
>+ */
>+ writel(cmd->frame_phys_addr >> 3,
>+ &instance->reg_set->inbound_queue_port);
>+
>+ /*
>+ * Wait for cmd_status to change
>+ */
>+ for(i=0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) {
>+ rmb();
>+ msleep(1);
>+ }
>+
>+ if (frame_hdr->cmd_status == 0xff)
>+ return -ETIME;
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_issue_blocked_cmd - Synchronous wrapper
>around regular FW cmds
>+ * @instance: Adapter soft state
>+ * @cmd: Command to be issued
>+ *
>+ * This function waits on an event for the command to be
>returned from ISR.
>+ * Used to issue ioctl commands.
>+ */
>+static int
>+megasas_issue_blocked_cmd(struct megasas_instance *instance,
>+ struct megasas_cmd *cmd)
>+{
>+ cmd->cmd_status = ENODATA;
>+
>+ writel(cmd->frame_phys_addr >> 3,
>+ &instance->reg_set->inbound_queue_port);
>+
>+ wait_event( instance->int_cmd_wait_q, (cmd->cmd_status
>!= ENODATA));
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_issue_blocked_abort_cmd - Aborts previously issued cmd
>+ * @instance: Adapter soft state
>+ * @cmd_to_abort: Previously issued cmd
>to be aborted
>+ *
>+ * MFI firmware can abort previously issued AEN comamnd
>(automatic event
>+ * notification). The megasas_issue_blocked_abort_cmd()
>issues such abort
>+ * cmd and blocks till it is completed.
>+ */
>+static int
>+megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
>+ struct megasas_cmd *cmd_to_abort)
>+{
>+ struct megasas_cmd *cmd;
>+ struct megasas_abort_frame *abort_fr;
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd)
>+ return -1;
>+
>+ abort_fr = &cmd->frame->abort;
>+
>+ /*
>+ * Prepare and issue the abort frame
>+ */
>+ abort_fr->cmd = MFI_CMD_ABORT;
>+ abort_fr->cmd_status = 0xFF;
>+ abort_fr->flags = 0;
>+ abort_fr->abort_context = cmd_to_abort->index;
>+ abort_fr->abort_mfi_phys_addr_lo =
>cmd_to_abort->frame_phys_addr;
>+ abort_fr->abort_mfi_phys_addr_hi = 0;
>+
>+ writel(cmd->frame_phys_addr >> 3,
>+ &instance->reg_set->inbound_queue_port);
>+
>+ /*
>+ * Wait for this cmd to complete
>+ */
>+ cmd->sync_cmd = 1;
>+ wait_event(instance->abort_cmd_wait_q, (cmd->cmd_status
>!= 0xFF));
>+
>+ megasas_return_cmd(instance, cmd);
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_make_sgl32 - Prepares 32-bit SGL
>+ * @instance: Adapter soft state
>+ * @scp: SCSI command from the mid-layer
>+ * @mfi_sgl: SGL to be filled in
>+ *
>+ * If successful, this function returns the number of SG elements.
>Otherwise,
>+ * it returnes -1.
>+ */
>+static inline int
>+megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd
>*scp,
>+ union
>megasas_sgl *mfi_sgl)
>+{
>+ int i;
>+ int sge_count;
>+ struct scatterlist *os_sgl;
>+
>+ /*
>+ * Return 0 if there is no data transfer
>+ */
>+ if (!scp->request_buffer || !scp->request_bufflen)
>+ return 0;
>+
>+ if (!scp->use_sg) {
>+ mfi_sgl->sge32[0].phys_addr =
>pci_map_single(instance->pdev,
>+
>scp->request_buffer,
>+
>scp->request_bufflen,
>+
>scp->sc_data_direction);
>+ mfi_sgl->sge32[0].length = scp->request_bufflen;
>+
>+ return 1;
>+ }
>+
>+ os_sgl = (struct scatterlist*) scp->request_buffer;
>+ sge_count = pci_map_sg(instance->pdev, os_sgl,
>scp->use_sg,
>+ scp->sc_data_direction );
>+
>+ for( i = 0; i < sge_count; i++, os_sgl++ ) {
>+ mfi_sgl->sge32[i].length = sg_dma_len(os_sgl);
>+ mfi_sgl->sge32[i].phys_addr =
>sg_dma_address(os_sgl);
>+ }
>+
>+ return sge_count;
>+}
>+
>+/**
>+ * megasas_make_sgl64 - Prepares 64-bit SGL
>+ * @instance: Adapter soft state
>+ * @scp: SCSI command from the mid-layer
>+ * @mfi_sgl: SGL to be filled in
>+ *
>+ * If successful, this function returns the number of SG elements.
>Otherwise,
>+ * it returnes -1.
>+ */
>+static inline int
>+megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd
>*scp,
>+ union
>megasas_sgl *mfi_sgl)
>+{
>+ int i;
>+ int sge_count;
>+ struct scatterlist *os_sgl;
>+
>+ /*
>+ * Return 0 if there is no data transfer
>+ */
>+ if (!scp->request_buffer || !scp->request_bufflen)
>+ return 0;
>+
>+ if (!scp->use_sg) {
>+ mfi_sgl->sge64[0].phys_addr =
>pci_map_single(instance->pdev,
>+
>scp->request_buffer,
>+
>scp->request_bufflen,
>+
>scp->sc_data_direction);
>+
>+ mfi_sgl->sge64[0].length = scp->request_bufflen;
>+
>+ return 1;
>+ }
>+
>+ os_sgl = (struct scatterlist*) scp->request_buffer;
>+ sge_count = pci_map_sg(instance->pdev, os_sgl,
>scp->use_sg,
>+ scp->sc_data_direction);
>+
>+ for(i = 0; i < sge_count; i++, os_sgl++) {
>+ mfi_sgl->sge64[i].length = sg_dma_len(os_sgl);
>+ mfi_sgl->sge64[i].phys_addr =
>sg_dma_address(os_sgl);
>+ }
>+
>+ return sge_count;
>+}
>+
>+/**
>+ * megasas_build_dcdb - Prepares a direct cdb (DCDB) command
>+ * @instance: Adapter soft state
>+ * @scp: SCSI command
>+ * @cmd: Command to be prepared in
>+ *
>+ * This function prepares CDB commands. These are typcially
>pass-through
>+ * commands to the devices.
>+ */
>+static inline int
>+megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd
>*scp,
>+ struct megasas_cmd *cmd)
>+{
>+ u32 sge_sz;
>+ int sge_bytes;
>+ u32 is_logical;
>+ u32 device_id;
>+ u16 flags = 0;
>+ struct megasas_pthru_frame* pthru;
>+
>+ is_logical = MEGASAS_IS_LOGICAL(scp);
>+ device_id = MEGASAS_DEV_INDEX(instance, scp);
>+ pthru = (struct megasas_pthru_frame*)
>cmd->frame;
>+
>+ if (scp->sc_data_direction == PCI_DMA_TODEVICE )
>+ flags = MFI_FRAME_DIR_WRITE;
>+ else if( scp->sc_data_direction == PCI_DMA_FROMDEVICE )
>+ flags = MFI_FRAME_DIR_READ;
>+ else if( scp->sc_data_direction == PCI_DMA_NONE )
>+ flags = MFI_FRAME_DIR_NONE;
>+
>+ /*
>+ * Prepare the DCDB frame
>+ */
>+ pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO :
>+
>MFI_CMD_PD_SCSI_IO;
>+ pthru->cmd_status = 0x0;
>+ pthru->scsi_status = 0x0;
>+ pthru->target_id = device_id;
>+ pthru->lun = scp->device->lun;
>+ pthru->cdb_len = scp->cmd_len;
>+ pthru->timeout = 0;
>+ pthru->flags = flags;
>+ pthru->data_xfer_len = scp->request_bufflen;
>+
>+ memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
>+
>+ /*
>+ * Construct SGL
>+ */
>+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
>+ sizeof(struct megasas_sge32);
>+
>+ if (IS_DMA64) {
>+ pthru->flags |= MFI_FRAME_SGL64;
>+ pthru->sge_count = megasas_make_sgl64(instance, scp,
>+
>&pthru->sgl);
>+ }
>+ else
>+ pthru->sge_count = megasas_make_sgl32(instance, scp,
>+
>&pthru->sgl);
>+
>+ /*
>+ * Sense info specific
>+ */
>+ pthru->sense_len = SCSI_SENSE_BUFFERSIZE;
>+ pthru->sense_buf_phys_addr_hi = 0;
>+ pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
>+
>+ sge_bytes = sge_sz * pthru->sge_count;
>+
>+ /*
>+ * Compute the total number of frames this command
>consumes. FW uses
>+ * this number to pull sufficient number of frames from
>host memory.
>+ */
>+ cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
>+ ((sge_bytes %
>MEGAMFI_FRAME_SIZE) ? 1 : 0) +
>1;
>+
>+ if (cmd->frame_count > 7)
>+ cmd->frame_count = 8;
>+
>+ return cmd->frame_count;
>+}
>+
>+/**
>+ * megasas_build_ldio - Prepares IOs to logical devices
>+ * @instance: Adapter soft state
>+ * @scp: SCSI command
>+ * @cmd: Command to to be prepared
>+ *
>+ * Frames (and accompanying SGLs) for regular SCSI IOs use
>this function.
>+ */
>+static inline int
>+megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd
>*scp,
>+ struct megasas_cmd *cmd)
>+{
>+ u32 sge_sz;
>+ int sge_bytes;
>+ u32 device_id;
>+ u8 sc = scp->cmnd[0];
>+ u16 flags = 0;
>+ struct megasas_io_frame *ldio;
>+
>+ device_id = MEGASAS_DEV_INDEX(instance, scp);
>+ ldio = (struct megasas_io_frame*) cmd->frame;
>+
>+ if (scp->sc_data_direction == PCI_DMA_TODEVICE )
>+ flags = MFI_FRAME_DIR_WRITE;
>+ else if( scp->sc_data_direction == PCI_DMA_FROMDEVICE )
>+ flags = MFI_FRAME_DIR_READ;
>+
>+ /*
>+ * Preare the Logical IO frame: 2nd bit is zero for all
>read cmds
>+ */
>+ ldio->cmd = (sc &
>0x02)?MFI_CMD_LD_WRITE:MFI_CMD_LD_READ;
>+ ldio->cmd_status = 0x0;
>+ ldio->scsi_status = 0x0;
>+ ldio->target_id = device_id;
>+ ldio->timeout = 0;
>+ ldio->reserved_0 = 0;
>+ ldio->pad_0 = 0;
>+ ldio->flags = flags;
>+ ldio->start_lba_hi = 0;
>+ ldio->access_byte = (scp->cmd_len != 6) ?
>scp->cmnd[1] : 0;
>+
>+ /*
>+ * 6-byte READ(0x08) or WRITE(0x0A) cdb
>+ */
>+ if (scp->cmd_len == 6) {
>+ ldio->lba_count = (u32)scp->cmnd[4];
>+ ldio->start_lba_lo =
>((u32)scp->cmnd[1] << 16)|
>+
>((u32)scp->cmnd[2] << 8) |
>+ (u32)scp->cmnd[3];
>+
>+ ldio->start_lba_lo &= 0x1FFFFF;
>+ }
>+
>+ /*
>+ * 10-byte READ(0x28) or WRITE(0x2A) cdb
>+ */
>+ else if (scp->cmd_len == 10) {
>+ ldio->lba_count = (u32)scp->cmnd[8] |
>+
>((u32)scp->cmnd[7] << 8);
>+ ldio->start_lba_lo =
>((u32)scp->cmnd[2] << 24)|
>+
>((u32)scp->cmnd[3] << 16)|
>+
>((u32)scp->cmnd[4] << 8)|
>+ (u32)scp->cmnd[5];
>+ }
>+
>+ /*
>+ * 12-byte READ(0xA8) or WRITE(0xAA) cdb
>+ */
>+ else if (scp->cmd_len == 12) {
>+ ldio->lba_count =
>((u32)scp->cmnd[6] << 24)|
>+
>((u32)scp->cmnd[7] << 16)|
>+
>((u32)scp->cmnd[8] << 8) |
>+ (u32)scp->cmnd[9];
>+
>+ ldio->start_lba_lo =
>((u32)scp->cmnd[2] << 24)|
>+
>((u32)scp->cmnd[3] << 16)|
>+
>((u32)scp->cmnd[4] << 8) |
>+ (u32)scp->cmnd[5];
>+ }
>+
>+ /*
>+ * 16-byte READ(0x88) or WRITE(0x8A) cdb
>+ */
>+ else if (scp->cmd_len == 16) {
>+ ldio->lba_count =
>((u32)scp->cmnd[10] << 24)|
>+
>((u32)scp->cmnd[11] << 16)|
>+
>((u32)scp->cmnd[12] << 8) |
>+ (u32)scp->cmnd[13];
>+
>+ ldio->start_lba_lo =
>((u32)scp->cmnd[6] << 24)|
>+
>((u32)scp->cmnd[7] << 16)|
>+
>((u32)scp->cmnd[8] << 8) |
>+ (u32)scp->cmnd[9];
>+
>+ ldio->start_lba_hi =
>((u32)scp->cmnd[2] << 24)|
>+
>((u32)scp->cmnd[3] << 16)|
>+
>((u32)scp->cmnd[4] << 8) |
>+ (u32)scp->cmnd[5];
>+
>+ }
>+
>+ /*
>+ * Construct SGL
>+ */
>+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
>+ sizeof(struct megasas_sge32);
>+
>+ if (IS_DMA64) {
>+ ldio->flags |= MFI_FRAME_SGL64;
>+ ldio->sge_count = megasas_make_sgl64(instance, scp,
>+
>&ldio->sgl);
>+ }
>+ else
>+ ldio->sge_count = megasas_make_sgl32(instance, scp,
>+
>&ldio->sgl);
>+
>+ /*
>+ * Sense info specific
>+ */
>+ ldio->sense_len = SCSI_SENSE_BUFFERSIZE;
>+ ldio->sense_buf_phys_addr_hi = 0;
>+ ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
>+
>+ sge_bytes = sge_sz * ldio->sge_count;
>+
>+ cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
>+ ((sge_bytes %
>MEGAMFI_FRAME_SIZE) ? 1 : 0) +
>1;
>+
>+ if (cmd->frame_count > 7)
>+ cmd->frame_count = 8;
>+
>+ return cmd->frame_count;
>+}
>+
>+/**
>+ * megasas_build_cmd - Prepares a command packet
>+ * @instance: Adapter soft state
>+ * @scp: SCSI command
>+ * @frame_count: [OUT] Number of frames used to prepare
>this command
>+ */
>+static inline struct megasas_cmd*
>+megasas_build_cmd(struct megasas_instance *instance, struct
>scsi_cmnd *scp,
>+ int
>*frame_count )
>+{
>+ u32 logical_cmd;
>+ struct megasas_cmd *cmd;
>+
>+ /*
>+ * Find out if this is logical or physical drive command.
>+ */
>+ logical_cmd = MEGASAS_IS_LOGICAL(scp);
>+
>+ /*
>+ * Logical drive command
>+ */
>+ if (logical_cmd) {
>+
>+ if (scp->device->id >= MEGASAS_MAX_LD) {
>+ scp->result = DID_BAD_TARGET << 16;
>+ return NULL;
>+ }
>+
>+ switch(scp->cmnd[0]) {
>+
>+ case READ_10:
>+ case WRITE_10:
>+ case READ_12:
>+ case WRITE_12:
>+ case READ_6:
>+ case WRITE_6:
>+ case READ_16:
>+ case WRITE_16:
>+ /*
>+ * Fail for LUN > 0
>+ */
>+ if (scp->device->lun) {
>+ scp->result = DID_BAD_TARGET << 16;
>+ return NULL;
>+ }
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd) {
>+ scp->result = DID_IMM_RETRY << 16;
>+ return NULL;
>+ }
>+
>+ *frame_count = megasas_build_ldio(instance, scp,
>cmd);
>+
>+ if (! (*frame_count) ) {
>+ megasas_return_cmd( instance, cmd );
>+ return NULL;
>+ }
>+
>+ return cmd;
>+
>+ default:
>+ /*
>+ * Fail for LUN > 0
>+ */
>+ if (scp->device->lun) {
>+ scp->result = DID_BAD_TARGET << 16;
>+ return NULL;
>+ }
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd) {
>+ scp->result = DID_IMM_RETRY << 16;
>+ return NULL;
>+ }
>+
>+ *frame_count = megasas_build_dcdb(instance, scp,
>cmd);
>+
>+ if (! (*frame_count) ) {
>+ megasas_return_cmd(instance, cmd);
>+ return NULL;
>+ }
>+
>+ return cmd;
>+ }
>+ }
>+ else {
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd) {
>+ scp->result = DID_IMM_RETRY << 16;
>+ return NULL;
>+ }
>+
>+ *frame_count = megasas_build_dcdb(instance, scp, cmd);
>+
>+ if (!(*frame_count)) {
>+ megasas_return_cmd(instance, cmd);
>+ return NULL;
>+ }
>+
>+ return cmd;
>+ }
>+
>+ return NULL;
>+}
>+
>+/**
>+ * megasas_queue_command - Queue entry point
>+ * @scmd: SCSI command to be queued
>+ * @done: Callback entry point
>+ */
>+static int
>+megasas_queue_command(struct scsi_cmnd *scmd, void (*done)(struct
>scsi_cmnd*))
>+{
>+ u32 frame_count;
>+ unsigned long flags;
>+ struct megasas_cmd *cmd;
>+ struct megasas_instance *instance;
>+
>+ instance = (struct megasas_instance*)
>+ scmd->device->host->hostdata;
>+ scmd->scsi_done = done;
>+ scmd->result = 0;
>+
>+ cmd = megasas_build_cmd( instance, scmd, &frame_count );
>+
>+ if (!cmd) {
>+ done(scmd);
>+ return 0;
>+ }
>+
>+ cmd->scmd = scmd;
>+
>+ /*
>+ * Issue the command to the FW
>+ */
>+ spin_lock_irqsave(&instance->instance_lock, flags);
>+ instance->fw_outstanding++;
>+ spin_unlock_irqrestore(&instance->instance_lock, flags);
>+
>+ writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)),
>+
>&instance->reg_set->inbound_queue_port );
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_wait_for_outstanding - Wait for all outstanding cmds
>+ * @instance: Adapter soft state
>+ *
>+ * This function waits for upto MEGASAS_RESET_WAIT_TIME
>seconds for FW to
>+ * complete all its outstanding commands. Returns error if
>one or more IOs
>+ * are pending after this time period. It also marks the
>controller dead.
>+ */
>+static int
>+megasas_wait_for_outstanding(struct megasas_instance *instance)
>+{
>+ int i;
>+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
>+
>+ for(i = 0; i < wait_time; i++) {
>+
>+ if (!instance->fw_outstanding)
>+ break;
>+
>+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
>+ printk( KERN_NOTICE "megasas:
>[%2d]waiting for %d "
>+ "commands to complete\n", i,
>instance->fw_outstanding );
>+ }
>+
>+ msleep(1000);
>+ }
>+
>+
>+ if (instance->fw_outstanding) {
>+ instance->hw_crit_error = 1;
>+ return FAILED;
>+ }
>+
>+ return SUCCESS;
>+}
>+
>+/**
>+ * megasas_generic_reset - Generic reset routine
>+ * @scmd: Mid-layer SCSI command
>+ *
>+ * This routine implements a generic reset handler for
>device, bus and host
>+ * reset requests. Device, bus and host specific reset
>handlers can use
>this
>+ * function after they do their specific tasks.
>+ */
>+static int
>+megasas_generic_reset(struct scsi_cmnd *scmd)
>+{
>+ int ret_val;
>+ struct megasas_instance *instance;
>+
>+ instance = (struct
>megasas_instance*)scmd->device->host->hostdata;
>+
>+ printk(KERN_NOTICE "megasas: RESET -%ld cmd=%x <c=%d
>t=%d l=%d>\n",
>+ scmd->serial_number, scmd->cmnd[0],
>scmd->device->channel,
>+ scmd->device->id, scmd->device->lun);
>+
>+ if (instance->hw_crit_error) {
>+ printk(KERN_ERR "megasas: cannot recover from
>previous reset
>"
>+
>"failures\n");
>+ return FAILED;
>+ }
>+
>+ spin_unlock(scmd->device->host->host_lock);
>+
>+ ret_val = megasas_wait_for_outstanding(instance);
>+
>+ if (ret_val == SUCCESS)
>+ printk(KERN_NOTICE "megasas: reset successful \n");
>+ else
>+ printk(KERN_ERR "megasas: failed to do reset\n");
>+
>+ spin_lock(scmd->device->host->host_lock);
>+
>+ return ret_val;
>+}
>+
>+/**
>+ * megasas_reset_device - Device reset handler entry point
>+ *
>+ * Issues CLUSTER_RESET_LD (FW direct cmd) before calling
>generic reset fn.
>+ */
>+static int
>+megasas_reset_device(struct scsi_cmnd *scmd)
>+{
>+ int ret;
>+ struct megasas_cmd *cmd;
>+ struct megasas_dcmd_frame *dcmd;
>+ struct megasas_instance *instance;
>+
>+ /*
>+ * First wait for all commands to complete
>+ */
>+ ret = megasas_generic_reset(scmd);
>+
>+ if (ret == FAILED)
>+ return ret;
>+
>+ /*
>+ * Reset reservations on LD
>+ */
>+ instance = (struct
>megasas_instance*)scmd->device->host->hostdata;
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (cmd) {
>+
>+ dcmd = &cmd->frame->dcmd;
>+
>+ memset( dcmd->mbox, 0, MFI_MBOX_SIZE );
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0x0;
>+ dcmd->sge_count = 0;
>+ dcmd->flags = MFI_FRAME_DIR_NONE;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = 0;
>+ dcmd->opcode = MR_DCMD_CLUSTER_RESET_LD;
>+ dcmd->mbox[0] =
>MEGASAS_DEV_INDEX(instance, scmd);
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ megasas_return_cmd(instance, cmd);
>+ }
>+
>+ return ret;
>+}
>+
>+/**
>+ * megasas_reset_bus_host - Bus & host reset handler entry point
>+ *
>+ * Issues CLUSTER_RESET_ALL (FW direct cmd) before calling
>generic reset
>fn.
>+ */
>+static int
>+megasas_reset_bus_host(struct scsi_cmnd *scmd)
>+{
>+ int ret;
>+ struct megasas_cmd *cmd;
>+ struct megasas_dcmd_frame *dcmd;
>+ struct megasas_instance *instance;
>+
>+ /*
>+ * Frist wait for all commands to complete
>+ */
>+ ret = megasas_generic_reset(scmd);
>+
>+ if (ret == FAILED)
>+ return ret;
>+
>+ /*
>+ * Reset all reservations
>+ */
>+ instance = (struct
>megasas_instance*)scmd->device->host->hostdata;
>+
>+ cmd = megasas_get_cmd( instance );
>+
>+ if (cmd) {
>+
>+ dcmd = &cmd->frame->dcmd;
>+
>+ memset( dcmd->mbox, 0, MFI_MBOX_SIZE );
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0x0;
>+ dcmd->sge_count = 0;
>+ dcmd->flags = MFI_FRAME_DIR_NONE;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = 0;
>+ dcmd->opcode = MR_DCMD_CLUSTER_RESET_ALL;
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ megasas_return_cmd(instance, cmd);
>+ }
>+
>+ return ret;
>+}
>+
>+/**
>+ * megasas_service_aen - Processes an event notification
>+ * @instance: Adapter soft state
>+ * @cmd: AEN command completed by the ISR
>+ *
>+ * For AEN, driver sends a command down to FW that is held by
>the FW till
>an
>+ * event occurs. When an event of interest occurs, FW
>completes the command
>+ * that it was previously holding.
>+ *
>+ * This routines sends SIGIO signal to processes that have
>registered with
>the
>+ * driver for AEN.
>+ */
>+static void
>+megasas_service_aen(struct megasas_instance *instance, struct
>megasas_cmd
>*cmd)
>+{
>+ /*
>+ * Don't signal app if it is just an aborted previously
>registered
>aen
>+ */
>+ if (!cmd->abort_aen)
>+ kill_fasync( &megasas_async_queue, SIGIO, POLL_IN );
>+ else
>+ cmd->abort_aen = 0;
>+
>+ instance->aen_cmd = NULL;
>+ megasas_return_cmd(instance, cmd);
>+}
>+
>+/**
>+ * megasas_sysfs_show_app_hndl - Exports adapter handle via sysfs
>+ *
>+ * User space applications _don't_ address the controllers
>using zero based
>+ * indices. Instead driver exports a unique 16-bit handle for each
>controller
>+ * (refer to comments under MR_LINUX_GET_ADAPTER_MAP ioctl).
>+ *
>+ * Applications use this handle to delete or add logical
>drives (via FW
>+ * commands). To make these logical driver appear or disappear to SCSI
>layer,
>+ * applications have to do a delete or scan on a SCSI host in
>sysfs tree.
>+ * The applications have to have a way to find out the SCSI
>host number
>+ * corresponding to the unique 16-bit handle.
>+ *
>+ * This function exports the unique 16-bit handle in sysfs
>under the SCSI
>+ * host. Applications can traverse the list of hosts till
>they find a host
>+ * that has the required handle.
>+ */
>+static ssize_t
>+megasas_sysfs_show_app_hndl(struct class_device *cdev, char *buf)
>+{
>+ int i;
>+ u32 hndl = 0;
>+ struct Scsi_Host *shost;
>+ struct megasas_instance *instance;
>+
>+ shost = class_to_shost( cdev );
>+ instance = (struct megasas_instance*)shost->hostdata;
>+
>+ for (i = 0; i < megasas_mgmt_info.max_index; i++ ) {
>+
>+ if (instance == megasas_mgmt_info.instance[i])
>+ hndl = ((i + 1) << 4) | 0xF;
>+ }
>+
>+ return snprintf(buf, 8, "%u\n", hndl);
>+}
>+
>+/*
>+ * Sysfs attribute definition: Exports driver specific
>controller handle
>+ */
>+CLASS_DEVICE_ATTR(megaraid_sas_app_hndl, S_IRUSR,
>megasas_sysfs_show_app_hndl,
>+
>NULL);
>+/*
>+ * Host template initializer for sysfs attributes
>+ */
>+static struct class_device_attribute* megasas_shost_attrs[] = {
>+ &class_device_attr_megaraid_sas_app_hndl,
>+ NULL,
>+};
>+
>+/*
>+ * Scsi host template for megaraid_sas driver
>+ */
>+static struct scsi_host_template megasas_template = {
>+
>+ .module = THIS_MODULE,
>+ .name = "LSI Logic SAS based MegaRAID
>driver",
>+ .queuecommand = megasas_queue_command,
>+ .eh_device_reset_handler = megasas_reset_device,
>+ .eh_bus_reset_handler = megasas_reset_bus_host,
>+ .eh_host_reset_handler = megasas_reset_bus_host,
>+ .use_clustering = ENABLE_CLUSTERING,
>+ .shost_attrs = megasas_shost_attrs,
>+};
>+
>+/**
>+ * megasas_complete_int_cmd - Completes an internal command
>+ * @instance: Adapter soft state
>+ * @cmd: Command to be completed
>+ *
>+ * The megasas_issue_blocked_cmd() function waits for a
>command to complete
>+ * after it issues a command. This function wakes up that
>waiting routine
>by
>+ * calling wake_up() on the wait queue.
>+ */
>+static void
>+megasas_complete_int_cmd(struct megasas_instance *instance,
>+ struct megasas_cmd* cmd)
>+{
>+ cmd->cmd_status = cmd->frame->io.cmd_status;
>+
>+ if (cmd->cmd_status == ENODATA) {
>+ cmd->cmd_status = 0;
>+ }
>+ wake_up(&instance->int_cmd_wait_q);
>+}
>+
>+/**
>+ * megasas_complete_abort - Completes aborting a command
>+ * @instance: Adapter soft state
>+ * @cmd: Cmd that was issued to abort another cmd
>+ *
>+ * The megasas_issue_blocked_abort_cmd() function waits on
>abort_cmd_wait_q
>
>+ * after it issues an abort on a previously issued command.
>This function
>+ * wakes up all functions waiting on the same wait queue.
>+ */
>+static void
>+megasas_complete_abort(struct megasas_instance *instance,
>+ struct megasas_cmd *cmd)
>+{
>+ if (cmd->sync_cmd) {
>+ cmd->sync_cmd = 0;
>+ wake_up(&instance->abort_cmd_wait_q);
>+ }
>+
>+ return;
>+}
>+
>+/**
>+ * megasas_unmap_sgbuf - Unmap SG buffers
>+ * @instance: Adapter soft state
>+ * @cmd: Completed command
>+ */
>+static inline void
>+megasas_unmap_sgbuf(struct megasas_instance *instance, struct
>megasas_cmd
>*cmd)
>+{
>+ dma_addr_t buf_h;
>+ u8 opcode;
>+
>+ if (cmd->scmd->use_sg) {
>+ pci_unmap_sg(instance->pdev, cmd->scmd->request_buffer,
>+ cmd->scmd->use_sg,
>cmd->scmd->sc_data_direction);
>+ return;
>+ }
>+
>+ if (!cmd->scmd->request_bufflen)
>+ return;
>+
>+ opcode = cmd->frame->hdr.cmd;
>+
>+ if ((opcode == MFI_CMD_LD_READ) || (opcode ==
>MFI_CMD_LD_WRITE)) {
>+ if (IS_DMA64)
>+ buf_h = cmd->frame->io.sgl.sge64[0].phys_addr;
>+ else
>+ buf_h = cmd->frame->io.sgl.sge32[0].phys_addr;
>+ }
>+ else {
>+ if (IS_DMA64)
>+ buf_h =
>cmd->frame->pthru.sgl.sge64[0].phys_addr;
>+ else
>+ buf_h =
>cmd->frame->pthru.sgl.sge32[0].phys_addr;
>+ }
>+
>+ pci_unmap_single(instance->pdev, buf_h,
>cmd->scmd->request_bufflen,
>+
>cmd->scmd->sc_data_direction);
>+ return;
>+}
>+
>+/**
>+ * megasas_complete_cmd - Completes a command
>+ * @instance: Adapter soft state
>+ * @cmd: Command to be completed
>+ * @alt_status: If non-zero, use this value as
>status to
>+ * SCSI mid-layer instead of the
>value returned
>+ * by the FW. This should be used if caller
>wants
>+ * an alternate status (as in the case of
>aborted
>+ * commands)
>+ */
>+static inline void
>+megasas_complete_cmd(struct megasas_instance *instance,
>struct megasas_cmd
>*cmd,
>+ u8
>alt_status)
>+{
>+ int exception = 0;
>+ struct megasas_header *hdr = &cmd->frame->hdr;
>+ unsigned long flags;
>+
>+ switch( hdr->cmd ) {
>+
>+ case MFI_CMD_PD_SCSI_IO:
>+ case MFI_CMD_LD_SCSI_IO:
>+
>+ /*
>+ * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO
>could have been
>+ * issued either through an IO path or an IOCTL
>path. If it
>+ * was via IOCTL, we will send it to internal
>completion.
>+ */
>+ if (cmd->sync_cmd) {
>+ cmd->sync_cmd = 0;
>+ megasas_complete_int_cmd(instance, cmd);
>+ break;
>+ }
>+
>+ /*
>+ * Don't export physical disk devices to mid-layer.
>+ */
>+ if (!MEGASAS_IS_LOGICAL(cmd->scmd) &&
>+ (hdr->cmd_status == MFI_STAT_OK) &&
>+ (cmd->scmd->cmnd[0] == INQUIRY)) {
>+
>+ if (((*(u8*) cmd->scmd->request_buffer)
>& 0x1F) ==
>+
>TYPE_DISK) {
>+ cmd->scmd->result =
>DID_BAD_TARGET << 16;
>+ exception = 1;
>+ }
>+ }
>+
>+ case MFI_CMD_LD_READ:
>+ case MFI_CMD_LD_WRITE:
>+
>+ if (alt_status) {
>+ cmd->scmd->result = alt_status << 16;
>+ exception = 1;
>+ }
>+
>+
>+ if (exception) {
>+
>+
>spin_lock_irqsave(&instance->instance_lock, flags);
>+ instance->fw_outstanding--;
>+ spin_unlock_irqrestore(&instance->instance_lock,
>flags);
>+
>+ megasas_unmap_sgbuf(instance, cmd);
>+ cmd->scmd->scsi_done(cmd->scmd);
>+ megasas_return_cmd(instance, cmd);
>+
>+ break;
>+ }
>+
>+
>+ switch (hdr->cmd_status) {
>+
>+ case MFI_STAT_OK:
>+ case MFI_STAT_LD_CC_IN_PROGRESS:
>+ case MFI_STAT_LD_INIT_IN_PROGRESS:
>+ case MFI_STAT_LD_RECON_IN_PROGRESS:
>+ cmd->scmd->result = DID_OK << 16;
>+ break;
>+
>+ case MFI_STAT_SCSI_IO_FAILED:
>+ cmd->scmd->result = (DID_ERROR << 16)
>|hdr->scsi_status;
>+ break;
>+
>+ case MFI_STAT_SCSI_DONE_WITH_ERROR:
>+
>+ cmd->scmd->result = (DID_OK << 16) |
>hdr->scsi_status;
>+
>+ if (hdr->scsi_status ==
>SAM_STAT_CHECK_CONDITION) {
>+ memset(cmd->scmd->sense_buffer, 0,
>+
>SCSI_SENSE_BUFFERSIZE);
>+ memcpy(cmd->scmd->sense_buffer,
>cmd->sense,
>+ hdr->sense_len);
>+
>+ cmd->scmd->result |= DRIVER_SENSE << 24;
>+ }
>+
>+ break;
>+
>+ case MFI_STAT_DEVICE_NOT_FOUND:
>+ cmd->scmd->result = DID_BAD_TARGET << 16;
>+ break;
>+
>+ default:
>+ printk(KERN_DEBUG "megasas: unhandled
>status %#x\n",
>+
>hdr->cmd_status);
>+ cmd->scmd->result = DID_ERROR << 16;
>+ }
>+
>+ spin_lock_irqsave(&instance->instance_lock, flags);
>+ instance->fw_outstanding--;
>+ spin_unlock_irqrestore(&instance->instance_lock, flags);
>+
>+ megasas_unmap_sgbuf(instance, cmd);
>+ cmd->scmd->scsi_done(cmd->scmd);
>+ megasas_return_cmd(instance, cmd);
>+
>+ break;
>+
>+ case MFI_CMD_SMP:
>+ case MFI_CMD_STP:
>+ case MFI_CMD_DCMD:
>+
>+ /*
>+ * See if got an event notification
>+ */
>+ if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT)
>+ megasas_service_aen(instance, cmd);
>+ else
>+ megasas_complete_int_cmd(instance, cmd);
>+
>+ break;
>+
>+ case MFI_CMD_ABORT:
>+ /*
>+ * Cmd issued to abort another cmd returned
>+ */
>+ megasas_complete_abort(instance, cmd);
>+ break;
>+
>+ default:
>+ break;
>+ }
>+}
>+
>+/**
>+ * megasas_deplete_reply_queue - Processes all completed commands
>+ * @instance: Adapter soft state
>+ * @alt_status: Alternate status to be
>returned to
>+ * SCSI mid-layer instead
>of the status
>+ * returned by the FW
>+ */
>+static inline int
>+megasas_deplete_reply_queue(struct megasas_instance *instance, u8
>alt_status)
>+{
>+ u32 status;
>+ u32 producer;
>+ u32 consumer;
>+ u32 context;
>+ struct megasas_cmd *cmd;
>+
>+ /*
>+ * Check if it is our interrupt
>+ */
>+ status = readl(&instance->reg_set->outbound_intr_status);
>+
>+ if (!(status & MFI_OB_INTR_STATUS_MASK)) {
>+ return IRQ_NONE;
>+ }
>+
>+ /*
>+ * Clear the interrupt by writing back the same value
>+ */
>+ writel(status, &instance->reg_set->outbound_intr_status);
>+
>+ producer = *instance->producer;
>+ consumer = *instance->consumer;
>+
>+ while(consumer != producer) {
>+ context = instance->reply_queue[consumer];
>+
>+ cmd = instance->cmd_list[context];
>+
>+ megasas_complete_cmd( instance, cmd, alt_status );
>+
>+ consumer++;
>+ if (consumer == (instance->max_fw_cmds + 1)) {
>+ consumer = 0;
>+ }
>+ }
>+
>+ *instance->consumer = producer;
>+
>+ return IRQ_HANDLED;
>+}
>+
>+/**
>+ * megasas_isr - isr entry point
>+ */
>+static irqreturn_t
>+megasas_isr(int irq, void *devp, struct pt_regs *regs)
>+{
>+ return megasas_deplete_reply_queue((struct
>megasas_instance*)devp,
>+
>DID_OK );
>+}
>+
>+/**
>+ * megasas_transition_to_ready - Move the FW to READY state
>+ * @reg_set: MFI register set
>+ *
>+ * During the initialization, FW passes can potentially be in
>any one of
>+ * several possible states. If the FW in operational,
>waiting-for-handshake
>+ * states, driver must take steps to bring it to ready state.
>Otherwise, it
>+ * has to wait for the ready state.
>+ */
>+static int
>+megasas_transition_to_ready(struct megasas_register_set *reg_set)
>+{
>+ int i;
>+ u8 max_wait;
>+ u32 fw_state;
>+ u32 cur_state;
>+
>+ fw_state = readl(&reg_set->outbound_msg_0) & MFI_STATE_MASK;
>+
>+ while(fw_state != MFI_STATE_READY) {
>+
>+ printk(KERN_INFO "megasas: Waiting for FW to
>come to ready"
>+
>" state\n");
>+ switch(fw_state) {
>+
>+ case MFI_STATE_FAULT:
>+
>+ printk(KERN_DEBUG "megasas: FW in FAULT
>state!!\n");
>+ return -ENODEV;
>+
>+ case MFI_STATE_WAIT_HANDSHAKE:
>+ /*
>+ * Set the CLR bit in inbound doorbell
>+ */
>+ writel(MFI_INIT_CLEAR_HANDSHAKE,
>+ &reg_set->inbound_doorbell);
>+
>+ max_wait = 2;
>+ cur_state = MFI_STATE_WAIT_HANDSHAKE;
>+ break;
>+
>+ case MFI_STATE_OPERATIONAL:
>+ /*
>+ * Bring it to READY state; assuming
>max wait 2 secs
>+ */
>+ megasas_disable_intr(reg_set);
>+ writel(MFI_INIT_READY,
>&reg_set->inbound_doorbell);
>+
>+ max_wait = 10;
>+ cur_state = MFI_STATE_OPERATIONAL;
>+ break;
>+
>+ case MFI_STATE_UNDEFINED:
>+ /*
>+ * This state should not last for more than 2
>seconds
>+ */
>+ max_wait = 2;
>+ cur_state = MFI_STATE_UNDEFINED;
>+ break;
>+
>+ case MFI_STATE_BB_INIT:
>+ max_wait = 2;
>+ cur_state = MFI_STATE_BB_INIT;
>+ break;
>+
>+ case MFI_STATE_FW_INIT:
>+ max_wait = 20;
>+ cur_state = MFI_STATE_FW_INIT;
>+ break;
>+
>+ case MFI_STATE_FW_INIT_2:
>+ max_wait = 20;
>+ cur_state = MFI_STATE_FW_INIT_2;
>+ break;
>+
>+ case MFI_STATE_DEVICE_SCAN:
>+ max_wait = 20;
>+ cur_state = MFI_STATE_DEVICE_SCAN;
>+ break;
>+
>+ case MFI_STATE_FLUSH_CACHE:
>+ max_wait = 20;
>+ cur_state = MFI_STATE_FLUSH_CACHE;
>+ break;
>+
>+ default:
>+ printk(KERN_DEBUG "megasas: Unknown
>state 0x%x\n",
>+
>fw_state);
>+ return -ENODEV;
>+ }
>+
>+ /*
>+ * The cur_state should not last for more than
>max_wait secs
>+ */
>+ for(i = 0; i < (max_wait * 1000); i++) {
>+ fw_state = MFI_STATE_MASK &
>+ readl(&reg_set->outbound_msg_0);
>+
>+ if (fw_state == cur_state) {
>+ msleep(1);
>+ }
>+ else
>+ break;
>+ }
>+
>+ /*
>+ * Return error if fw_state hasn't changed
>after max_wait
>+ */
>+ if (fw_state == cur_state) {
>+ printk(KERN_DEBUG "FW state [%d] hasn't
>changed "
>+ "in %d secs\n", fw_state, max_wait);
>+ return -ENODEV;
>+ }
>+ };
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_teardown_frame_pool - Destroy the cmd frame DMA pool
>+ * @instance: Adapter soft state
>+ */
>+static void
>+megasas_teardown_frame_pool(struct megasas_instance *instance)
>+{
>+ int i;
>+ u32 max_cmd = instance->max_fw_cmds;
>+ struct megasas_cmd *cmd;
>+
>+ if (!instance->frame_dma_pool)
>+ return;
>+
>+ /*
>+ * Return all frames to pool
>+ */
>+ for(i = 0; i < max_cmd; i++) {
>+
>+ cmd = instance->cmd_list[i];
>+
>+ if( cmd->frame)
>+ pci_pool_free(instance->frame_dma_pool,
>cmd->frame,
>+ cmd->frame_phys_addr);
>+
>+ if (cmd->sense)
>+ pci_pool_free(instance->sense_dma_pool,
>cmd->frame,
>+ cmd->sense_phys_addr);
>+ }
>+
>+ /*
>+ * Now destroy the pool itself
>+ */
>+ pci_pool_destroy(instance->frame_dma_pool);
>+ pci_pool_destroy(instance->sense_dma_pool);
>+
>+ instance->frame_dma_pool = NULL;
>+ instance->sense_dma_pool = NULL;
>+}
>+
>+/**
>+ * megasas_create_frame_pool - Creates DMA pool for cmd frames
>+ * @instance: Adapter soft state
>+ *
>+ * Each command packet has an embedded DMA memory buffer that
>is used for
>+ * filling MFI frame and the SG list that immediately follows
>the frame.
>This
>+ * function creates those DMA memory buffers for each command
>packet by
>using
>+ * PCI pool facility.
>+ */
>+static int
>+megasas_create_frame_pool(struct megasas_instance *instance)
>+{
>+ int i;
>+ u32 max_cmd;
>+ u32 sge_sz;
>+ u32 sgl_sz;
>+ u32 total_sz ;
>+ u32 frame_count;
>+ struct megasas_cmd *cmd;
>+
>+ max_cmd = instance->max_fw_cmds;
>+
>+ /*
>+ * Size of our frame is 64 bytes for MFI frame,
>followed by max SG
>+ * elements and finally SCSI_SENSE_BUFFERSIZE bytes for
>sense buffer
>+ */
>+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
>+ sizeof(struct megasas_sge32);
>+
>+ /*
>+ * Calculated the number of 64byte frames required for SGL
>+ */
>+ sgl_sz = sge_sz * instance->max_num_sge;
>+ frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE -
>1)/MEGAMFI_FRAME_SIZE;
>+
>+ /*
>+ * We need one extra frame for the MFI command
>+ */
>+ frame_count++;
>+
>+ total_sz = MEGAMFI_FRAME_SIZE * frame_count;
>+ /*
>+ * Use DMA pool facility provided by PCI layer
>+ */
>+ instance->frame_dma_pool = pci_pool_create("megasas frame pool",
>+ instance->pdev,
>total_sz, 64, 0);
>+
>+ if (!instance->frame_dma_pool) {
>+ printk(KERN_DEBUG "megasas: failed to setup
>frame pool\n");
>+ return -ENOMEM;
>+ }
>+
>+ instance->sense_dma_pool = pci_pool_create("megasas sense pool",
>+ instance->pdev, 128, 4, 0);
>+
>+ if (!instance->sense_dma_pool) {
>+ printk(KERN_DEBUG "megasas: failed to setup
>sense pool\n");
>+
>+ pci_pool_destroy(instance->frame_dma_pool);
>+ instance->frame_dma_pool = NULL;
>+
>+ return -ENOMEM;
>+ }
>+
>+ /*
>+ * Allocate and attach a frame to each of the commands
>in cmd_list.
>+ * By making cmd->index as the context instead of the
>&cmd, we can
>+ * always use 32bit context regardless of the architecture
>+ */
>+ for( i = 0; i < max_cmd; i++ ) {
>+
>+ cmd = instance->cmd_list[i];
>+
>+ cmd->frame =
>pci_pool_alloc(instance->frame_dma_pool,
>+ GFP_KERNEL,
>&cmd->frame_phys_addr);
>+
>+ cmd->sense =
>pci_pool_alloc(instance->sense_dma_pool,
>+ GFP_KERNEL,
>&cmd->sense_phys_addr);
>+
>+ /*
>+ * megasas_teardown_frame_pool() takes care of freeing
>+ * whatever has been allocated
>+ */
>+ if (!cmd->frame || !cmd->sense) {
>+ printk(KERN_DEBUG "megasas:
>pci_pool_alloc failed
>\n");
>+ megasas_teardown_frame_pool(instance);
>+ return -ENOMEM;
>+ }
>+
>+ cmd->frame->io.context = cmd->index;
>+ }
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_free_cmds - Free all the cmds in the free cmd pool
>+ * @instance: Adapter soft state
>+ */
>+static void
>+megasas_free_cmds(struct megasas_instance *instance)
>+{
>+ int i;
>+ /* First free the MFI frame pool */
>+ megasas_teardown_frame_pool( instance );
>+
>+ /* Free all the commands in the cmd_list */
>+ for (i = 0; i < instance->max_fw_cmds; i++)
>+ kfree(instance->cmd_list[i]);
>+
>+ /* Free the cmd_list buffer itself */
>+ kfree(instance->cmd_list);
>+ instance->cmd_list = NULL;
>+
>+ INIT_LIST_HEAD( &instance->cmd_pool );
>+}
>+
>+/**
>+ * megasas_alloc_cmds - Allocates the command packets
>+ * @instance: Adapter soft state
>+ *
>+ * Each command that is issued to the FW, whether IO commands
>from the OS
>or
>+ * internal commands like IOCTLs, are wrapped in local data structure
>called
>+ * megasas_cmd. The frame embedded in this megasas_cmd is
>actually issued
>to
>+ * the FW.
>+ *
>+ * Each frame has a 32-bit field called context (tag). This
>context is used
>+ * to get back the megasas_cmd from the frame when a frame
>gets completed
>in
>+ * the ISR. Typically the address of the megasas_cmd itself
>would be used
>as
>+ * the context. But we wanted to keep the differences between
>32 and 64 bit
>+ * systems to the mininum. We always use 32 bit integers for
>the context.
>In
>+ * this driver, the 32 bit values are the indices into an
>array cmd_list.
>+ * This array is used only to look up the megasas_cmd given
>the context.
>The
>+ * free commands themselves are maintained in a linked list called
>cmd_pool.
>+ */
>+static int
>+megasas_alloc_cmds(struct megasas_instance *instance)
>+{
>+ int i;
>+ int j;
>+ u32 max_cmd;
>+ struct megasas_cmd *cmd;
>+
>+ max_cmd = instance->max_fw_cmds;
>+
>+ /*
>+ * instance->cmd_list is an array of struct megasas_cmd
>pointers.
>+ * Allocate the dynamic array first and then allocate individual
>+ * commands.
>+ */
>+ instance->cmd_list = kmalloc(sizeof(struct
>megasas_cmd*) * max_cmd,
>+
>GFP_KERNEL);
>+
>+ if (!instance->cmd_list) {
>+ printk(KERN_DEBUG "megasas: out of memory\n");
>+ return -ENOMEM;
>+ }
>+
>+ memset(instance->cmd_list, 0, sizeof(struct megasas_cmd*) *
>max_cmd);
>+
>+ for(i = 0; i < max_cmd; i++) {
>+ instance->cmd_list[i] = kmalloc(sizeof(struct
>megasas_cmd),
>+
>GFP_KERNEL);
>+
>+ if (!instance->cmd_list[i]) {
>+
>+ for (j = 0; j < i; j++)
>+ kfree(instance->cmd_list[j]);
>+
>+ kfree(instance->cmd_list);
>+ instance->cmd_list = NULL;
>+
>+ return -ENOMEM;
>+ }
>+ }
>+
>+ /*
>+ * Add all the commands to command pool (instance->cmd_pool)
>+ */
>+ for( i = 0; i < max_cmd; i++ ) {
>+ cmd = instance->cmd_list[i];
>+ memset(cmd, 0, sizeof(struct megasas_cmd));
>+ cmd->index = i;
>+
>+ list_add_tail(&cmd->list, &instance->cmd_pool);
>+ }
>+
>+ /*
>+ * Create a frame pool and assign one frame to each cmd
>+ */
>+ if (megasas_create_frame_pool(instance)) {
>+ printk(KERN_DEBUG "megasas: Error creating frame DMA
>pool\n");
>+ megasas_free_cmds(instance);
>+ }
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_get_controller_info - Returns FW's controller
>structure
>+ * @instance: Adapter soft state
>+ * @ctrl_info: Controller
>information structure
>+ *
>+ * Issues an internal command (DCMD) to get the FW's
>controller structure.
>+ * This information is mainly used to find out the maximum IO
>transfer per
>+ * command supported by the FW.
>+ */
>+static int
>+megasas_get_ctrl_info(struct megasas_instance *instance,
>+ struct megasas_ctrl_info *ctrl_info)
>+{
>+ int ret = 0;
>+ struct megasas_cmd* cmd;
>+ struct megasas_dcmd_frame* dcmd;
>+ struct megasas_ctrl_info* ci;
>+ dma_addr_t ci_h;
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd) {
>+ printk(KERN_DEBUG "megasas: Failed to get a
>free cmd\n");
>+ return -ENOMEM;
>+ }
>+
>+ dcmd = &cmd->frame->dcmd;
>+
>+ ci = pci_alloc_consistent(instance->pdev,
>+ sizeof(struct
>megasas_ctrl_info), &ci_h);
>+
>+ if (!ci) {
>+ printk(KERN_DEBUG "Failed to alloc mem for ctrl
>info\n");
>+ megasas_return_cmd(instance, cmd);
>+ return -ENOMEM;
>+ }
>+
>+ memset(ci, 0, sizeof(*ci));
>+ memset(dcmd->mbox, 0, MFI_MBOX_SIZE);
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0xFF;
>+ dcmd->sge_count = 1;
>+ dcmd->flags = MFI_FRAME_DIR_READ;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = sizeof(struct
>megasas_ctrl_info);
>+ dcmd->opcode = MR_DCMD_CTRL_GET_INFO;
>+ dcmd->sgl.sge32[0].phys_addr = ci_h;
>+ dcmd->sgl.sge32[0].length = sizeof(struct
>megasas_ctrl_info);
>+
>+ if (!megasas_issue_polled(instance, cmd)) {
>+ ret = 0;
>+ memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
>+ }
>+ else {
>+ ret = -1;
>+ }
>+
>+ pci_free_consistent(instance->pdev, sizeof(struct
>megasas_ctrl_info),
>+
>ci, ci_h);
>+
>+ megasas_return_cmd(instance, cmd);
>+ return ret;
>+}
>+
>+/**
>+ * megasas_init_mfi - Initializes the FW
>+ * @instance: Adapter soft state
>+ *
>+ * This is the main function for initializing MFI firmware.
>+ */
>+static int
>+megasas_init_mfi(struct megasas_instance *instance)
>+{
>+ u32 context_sz;
>+ u32 reply_q_sz;
>+ u32 max_sectors_1;
>+ u32 max_sectors_2;
>+ struct megasas_register_set *reg_set;
>+
>+ struct megasas_cmd *cmd;
>+ struct megasas_ctrl_info *ctrl_info;
>+
>+ struct megasas_init_frame *init_frame;
>+ struct megasas_init_queue_info *initq_info;
>+ dma_addr_t init_frame_h;
>+ dma_addr_t initq_info_h;
>+
>+ /*
>+ * Map the message registers
>+ */
>+ instance->base_addr = pci_resource_start(instance->pdev, 0);
>+
>+ if (pci_request_regions(instance->pdev, "megasas: LSI Logic")) {
>+ printk( KERN_DEBUG "megasas: IO memory region busy!\n");
>+ return -EBUSY;
>+ }
>+
>+ instance->reg_set = (struct megasas_register_set*)
>ioremap_nocache(
>+
>instance->base_addr, 8192);
>+
>+ if (!instance->reg_set) {
>+ printk( KERN_DEBUG "megasas: Failed to map IO mem\n" );
>+ goto fail_ioremap;
>+ }
>+
>+ reg_set = instance->reg_set;
>+
>+ /*
>+ * We expect the FW state to be READY
>+ */
>+ if (megasas_transition_to_ready(instance->reg_set))
>+ goto fail_ready_state;
>+
>+ /*
>+ * Get various operational parameters from status register
>+ */
>+ instance->max_fw_cmds = readl(&reg_set->outbound_msg_0)
>& 0x00FFFF;
>+ instance->max_num_sge =(readl(&reg_set->outbound_msg_0)
>& 0xFF0000)
>>>
>+
>0x10;
>+ /*
>+ * Create a pool of commands
>+ */
>+ if (megasas_alloc_cmds(instance))
>+ goto fail_alloc_cmds;
>+
>+ /*
>+ * Allocate memory for reply queue. Length of reply queue should
>+ * be _one_ more than the maximum commands handled by
>the firmware.
>+ *
>+ * Note: When FW completes commands, it places
>corresponding contex
>+ * values in this circular reply queue. This circular queue is a
>fairly
>+ * typical producer-consumer queue. FW is the producer
>(of completed
>+ * commands) and the driver is the consumer.
>+ */
>+ context_sz = sizeof(u32);
>+ reply_q_sz = context_sz * (instance->max_fw_cmds + 1);
>+
>+ instance->reply_queue = pci_alloc_consistent(instance->pdev,
>+ reply_q_sz, &instance->reply_queue_h);
>+
>+ if (!instance->reply_queue) {
>+ printk( KERN_DEBUG "megasas: Out of DMA mem for reply
>queue\n");
>+ goto fail_reply_queue;
>+ }
>+
>+ /*
>+ * Prepare a init frame. Note the init frame points to
>queue info
>+ * structure. Each frame has SGL allocated after first
>64 bytes. For
>+ * this frame - since we don't need any SGL - we use
>SGL's space as
>+ * queue info structure
>+ *
>+ * We will not get a NULL command below. We just
>created the pool.
>+ */
>+ cmd = megasas_get_cmd(instance);
>+
>+ init_frame = (struct megasas_init_frame*) cmd->frame;
>+ initq_info = (struct megasas_init_queue_info*)
>+ ((unsigned long)init_frame + 64);
>+
>+ init_frame_h = cmd->frame_phys_addr;
>+ initq_info_h = init_frame_h + 64;
>+
>+ memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
>+ memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
>+
>+ initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
>+ initq_info->reply_queue_start_phys_addr_lo =
>+ instance->reply_queue_h;
>+
>+ initq_info->producer_index_phys_addr_lo = instance->producer_h;
>+ initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
>+
>+ init_frame->cmd = MFI_CMD_INIT;
>+ init_frame->cmd_status = 0xFF;
>+ init_frame->queue_info_new_phys_addr_lo = initq_info_h;
>+
>+ init_frame->data_xfer_len = sizeof(struct
>megasas_init_queue_info);
>+
>+ /*
>+ * Issue the init frame in polled mode
>+ */
>+ if (megasas_issue_polled(instance, cmd)) {
>+ printk(KERN_DEBUG "megasas: Failed to init firmware\n");
>+ goto fail_fw_init;
>+ }
>+
>+ megasas_return_cmd(instance, cmd);
>+
>+ ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info),
>GFP_KERNEL);
>+
>+ /*
>+ * Compute the max allowed sectors per IO: The
>controller info has
>two
>+ * limits on max sectors. Driver should use the minimum of these
>two.
>+ *
>+ * 1 << stripe_sz_ops.min = max sectors per strip
>+ *
>+ * Note that older firmwares ( < FW ver 30) didn't report
>information
>+ * to calculate max_sectors_1. So the number ended up as zero
>always.
>+ */
>+ if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) {
>+
>+ max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
>+ ctrl_info->max_strips_per_io;
>+ max_sectors_2 = ctrl_info->max_request_size;
>+
>+ instance->max_sectors_per_req = (max_sectors_1 <
>max_sectors_2)
>+ ? max_sectors_1 :
>max_sectors_2;
>+ }
>+ else
>+ instance->max_sectors_per_req = instance->max_num_sge *
>+ PAGE_SIZE / 512;
>+
>+ kfree(ctrl_info);
>+
>+ return 0;
>+
>+fail_fw_init:
>+ megasas_return_cmd(instance, cmd);
>+
>+ pci_free_consistent(instance->pdev, reply_q_sz,
>+ instance->reply_queue,
>+ instance->reply_queue_h);
>+fail_reply_queue:
>+ megasas_free_cmds(instance);
>+
>+fail_alloc_cmds:
>+fail_ready_state:
>+ iounmap(instance->reg_set);
>+
>+fail_ioremap:
>+ pci_release_regions(instance->pdev);
>+
>+ return -EINVAL;
>+}
>+
>+/**
>+ * megasas_release_mfi - Reverses the FW initialization
>+ * @intance: Adapter soft state
>+ */
>+static void
>+megasas_release_mfi(struct megasas_instance *instance)
>+{
>+ u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1);
>+
>+ pci_free_consistent(instance->pdev, reply_q_sz,
>+ instance->reply_queue,
>+ instance->reply_queue_h);
>+
>+ megasas_free_cmds(instance);
>+
>+ iounmap(instance->reg_set);
>+
>+ pci_release_regions(instance->pdev);
>+}
>+
>+/**
>+ * megasas_get_seq_num - Gets latest event sequence numbers
>+ * @instance: Adapter soft state
>+ * @eli: FW event log sequence numbers
>information
>+ *
>+ * FW maintains a log of all events in a non-volatile area.
>Upper layers
>would
>+ * usually find out the latest sequence number of the events, the seq
>number at
>+ * the boot etc. They would "read" all the events below the latest seq
>number
>+ * by issuing a direct fw cmd (DCMD). For the future events
>(beyond latest
>seq
>+ * number), they would subsribe to AEN (asynchronous event
>notification)
>and
>+ * wait for the events to happen.
>+ */
>+static int
>+megasas_get_seq_num( struct megasas_instance *instance,
>+ struct megasas_evt_log_info *eli)
>+{
>+ struct megasas_cmd *cmd;
>+ struct megasas_dcmd_frame *dcmd;
>+ struct megasas_evt_log_info *el_info;
>+ dma_addr_t el_info_h;
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd) {
>+ return -ENOMEM;
>+ }
>+
>+ dcmd = &cmd->frame->dcmd;
>+ el_info = pci_alloc_consistent(instance->pdev,
>+ sizeof(struct megasas_evt_log_info),
>+ &el_info_h);
>+
>+ if (!el_info) {
>+ megasas_return_cmd(instance, cmd);
>+ return -ENOMEM;
>+ }
>+
>+ memset(el_info, 0, sizeof(*el_info));
>+ memset(dcmd->mbox, 0, MFI_MBOX_SIZE);
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0x0;
>+ dcmd->sge_count = 1;
>+ dcmd->flags = MFI_FRAME_DIR_READ;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = sizeof(struct
>megasas_evt_log_info);
>+ dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO;
>+ dcmd->sgl.sge32[0].phys_addr = el_info_h;
>+ dcmd->sgl.sge32[0].length = sizeof(struct
>megasas_evt_log_info);
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ /*
>+ * Copy the data back into callers buffer
>+ */
>+ memcpy(eli, el_info, sizeof(struct megasas_evt_log_info));
>+
>+ pci_free_consistent(instance->pdev, sizeof(struct
>megasas_evt_log_info),
>+
>el_info, el_info_h);
>+
>+ megasas_return_cmd(instance, cmd);
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_register_aen - Registers for asynchronous event
>notification
>+ * @instance: Adapter soft state
>+ * @seq_num: The starting sequence number
>+ * @class_locale: Class of the event
>+ *
>+ * This function subscribes for AEN for events beyond the @seq_num. It
>requests
>+ * to be notified if and only if the event is of type @class_locale
>+ */
>+static int
>+megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
>+ u32
>class_locale_word)
>+{
>+ int ret_val;
>+ struct megasas_cmd *cmd;
>+ struct megasas_dcmd_frame *dcmd;
>+ u32 *mbox_word;
>+ union megasas_evt_class_locale curr_aen;
>+ union megasas_evt_class_locale prev_aen;
>+
>+ /*
>+ * If there an AEN pending already (aen_cmd), check if the
>+ * class_locale of that pending AEN is inclusive of the new
>+ * AEN request we currently have. If it is, then we don't have
>+ * to do anything. In other words, whichever events the current
>+ * AEN request is subscribing to, have already been subscribed
>+ * to.
>+ *
>+ * If the old_cmd is _not_ inclusive, then we have to abort
>+ * that command, form a class_locale that is superset of both
>+ * old and current and re-issue to the FW
>+ */
>+
>+ curr_aen.word = class_locale_word;
>+
>+ if (instance->aen_cmd) {
>+
>+ mbox_word =
>(u32*)instance->aen_cmd->frame->dcmd.mbox;
>+ prev_aen.word = mbox_word[1];
>+
>+ if (prev_aen.word == curr_aen.word) {
>+ /*
>+ * Required events have already been
>subscribed for
>+ */
>+ return 0;
>+ }
>+ else{
>+ curr_aen.members.locale |=
>prev_aen.members.locale;
>+
>+ if(prev_aen.members.class <
>curr_aen.members.class)
>+ curr_aen.members.class =
>prev_aen.members.class;
>+
>+ instance->aen_cmd->abort_aen = 1;
>+ ret_val =
>megasas_issue_blocked_abort_cmd(instance,
>+ instance->aen_cmd);
>+
>+ if (ret_val) {
>+ printk(KERN_DEBUG "megasas:
>Failed to abort
>"
>+ "previous AEN
>command\n");
>+ return ret_val;
>+ }
>+ }
>+ }
>+
>+ cmd = megasas_get_cmd( instance );
>+
>+ if (!cmd)
>+ return -ENOMEM;
>+
>+ dcmd = &cmd->frame->dcmd;
>+ mbox_word = (u32*) dcmd->mbox;
>+
>+ memset(instance->evt_detail, 0, sizeof(struct
>megasas_evt_detail));
>+
>+ /*
>+ * Prepare DCMD for aen registration
>+ */
>+ memset(dcmd->mbox, 0, MFI_MBOX_SIZE);
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0x0;
>+ dcmd->sge_count = 1;
>+ dcmd->flags = MFI_FRAME_DIR_READ;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = sizeof(struct
>megasas_evt_detail);
>+ dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
>+ mbox_word[0] = seq_num;
>+ mbox_word[1] = curr_aen.word;
>+ dcmd->sgl.sge32[0].phys_addr =
>(u32)(instance->evt_detail_h &
>+ 0xFFFF);
>+ dcmd->sgl.sge32[0].length = sizeof(struct
>megasas_evt_detail);
>+
>+ /*
>+ * Store reference to the cmd used to register for AEN. When an
>+ * application wants us to register for AEN, we have to
>abort this
>+ * cmd and re-register with a new EVENT LOCALE supplied
>by that app
>+ */
>+ instance->aen_cmd = cmd;
>+
>+ /*
>+ * Issue the aen registration frame
>+ */
>+ writel(cmd->frame_phys_addr >> 3,
>+ &instance->reg_set->inbound_queue_port);
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_start_aen - Subscribes to AEN during driver
>load time
>+ * @instance: Adapter soft state
>+ */
>+static int
>+megasas_start_aen(struct megasas_instance *instance)
>+{
>+ struct megasas_evt_log_info eli;
>+ union megasas_evt_class_locale class_locale;
>+
>+ /*
>+ * Get the latest sequence number from FW
>+ */
>+ memset( &eli, 0, sizeof(eli) );
>+
>+ if (megasas_get_seq_num( instance, &eli ))
>+ return -1;
>+
>+ /*
>+ * Register AEN with FW for latest sequence number plus 1
>+ */
>+ class_locale.members.reserved = 0;
>+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
>+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
>+
>+ return megasas_register_aen( instance, eli.newest_seq_num + 1,
>+ class_locale.word );
>+}
>+
>+/**
>+ * megasas_io_attach - Attaches this driver to SCSI mid-layer
>+ * @instance: Adapter soft state
>+ */
>+static int
>+megasas_io_attach(struct megasas_instance *instance)
>+{
>+ struct Scsi_Host *host = instance->host;
>+
>+ /*
>+ * Export parameters required by SCSI mid-layer
>+ */
>+ scsi_set_device( host, &instance->pdev->dev );
>+
>+ host->irq = instance->pdev->irq;
>+ host->unique_id = instance->unique_id;
>+ host->can_queue = instance->max_fw_cmds -
>MEGASAS_INT_CMDS;
>+ host->this_id = instance->init_id;
>+ host->sg_tablesize = instance->max_num_sge;
>+ host->max_sectors = instance->max_sectors_per_req;
>+ host->cmd_per_lun = instance->max_fw_cmds -
>MEGASAS_INT_CMDS;
>+ host->max_channel = MEGASAS_MAX_CHANNELS - 1;
>+ host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
>+ host->max_lun = MEGASAS_MAX_LUN;
>+
>+ /*
>+ * Notify the mid-layer about the new controller
>+ */
>+ if (scsi_add_host(host, &instance->pdev->dev)) {
>+ printk( KERN_DEBUG "megasas: scsi_add_host failed\n" );
>+ return -ENODEV;
>+ }
>+
>+ /*
>+ * Trigger SCSI to scan our drives
>+ */
>+ scsi_scan_host(host);
>+ return 0;
>+}
>+
>+/**
>+ * megasas_probe_one - PCI hotplug entry point
>+ * @pdev: PCI device structure
>+ * @id: PCI ids of supported hotplugged adapter
>+ */
>+static int __devinit
>+megasas_probe_one(struct pci_dev *pdev, const struct
>pci_device_id *id )
>+{
>+ int rval;
>+ struct Scsi_Host *host;
>+ struct megasas_instance *instance;
>+
>+ /*
>+ * Announce PCI information
>+ */
>+ printk(KERN_INFO "megasas: %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
>+ pdev->vendor, pdev->device, pdev->subsystem_vendor,
>+ pdev->subsystem_device);
>+
>+ printk(KERN_INFO "megasas: bus %d:slot %d:func %d\n",
>+ pdev->bus->number,
>PCI_SLOT(pdev->devfn),PCI_FUNC(pdev->devfn));
>+
>+ /*
>+ * PCI prepping: enable device set bus mastering and dma mask
>+ */
>+ rval = pci_enable_device(pdev);
>+
>+ if (rval) {
>+ return rval;
>+ }
>+
>+ pci_set_master(pdev);
>+
>+ /*
>+ * All our contollers are capable of performing 64-bit DMA
>+ */
>+ if (IS_DMA64) {
>+ if (pci_set_dma_mask( pdev, DMA_64BIT_MASK) != 0) {
>+
>+ if (pci_set_dma_mask( pdev,
>DMA_32BIT_MASK ) != 0)
>+ goto fail_set_dma_mask;
>+ }
>+ }
>+ else {
>+ if (pci_set_dma_mask( pdev, DMA_32BIT_MASK ) != 0)
>+ goto fail_set_dma_mask;
>+ }
>+
>+ host = scsi_host_alloc(&megasas_template,
>+ sizeof(struct megasas_instance));
>+
>+ if (!host) {
>+ printk(KERN_DEBUG "megasas: scsi_host_alloc failed\n");
>+ goto fail_alloc_instance;
>+ }
>+
>+ instance = (struct megasas_instance*)host->hostdata;
>+ memset(instance, 0, sizeof(*instance));
>+
>+ instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
>+
>&instance->producer_h);
>+ instance->consumer = pci_alloc_consistent(pdev, sizeof(u32),
>+
>&instance->consumer_h);
>+
>+ if (!instance->producer || !instance->consumer) {
>+ printk( KERN_DEBUG "megasas: Failed to allocate
>memory for "
>+ "producer,
>consumer\n" );
>+ goto fail_alloc_dma_buf;
>+ }
>+
>+ *instance->producer = 0;
>+ *instance->consumer = 0;
>+
>+ instance->evt_detail = pci_alloc_consistent(pdev,
>+ sizeof(struct megasas_evt_detail),
>+ &instance->evt_detail_h);
>+
>+ if (!instance->evt_detail) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate
>memory for "
>+ "event detail
>structure\n");
>+ goto fail_alloc_dma_buf;
>+ }
>+
>+ /*
>+ * Initialize locks and queues
>+ */
>+ INIT_LIST_HEAD(&instance->cmd_pool);
>+
>+ init_waitqueue_head(&instance->int_cmd_wait_q);
>+ init_waitqueue_head(&instance->abort_cmd_wait_q);
>+
>+ spin_lock_init(&instance->aen_lock);
>+ spin_lock_init(&instance->cmd_pool_lock);
>+ spin_lock_init(&instance->instance_lock);
>+
>+ /*
>+ * Initialize PCI related and misc parameters
>+ */
>+ instance->pdev = pdev;
>+ instance->host = host;
>+ instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
>+ instance->init_id = MEGASAS_DEFAULT_INIT_ID;
>+
>+ /*
>+ * Initialize MFI Firmware
>+ */
>+ if (megasas_init_mfi(instance))
>+ goto fail_init_mfi;
>+
>+ /*
>+ * Register IRQ
>+ */
>+ if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas",
>+ instance)) {
>+ printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
>+ goto fail_irq;
>+ }
>+
>+ megasas_enable_intr(instance->reg_set);
>+
>+ /*
>+ * Store instance in PCI softstate
>+ */
>+ pci_set_drvdata(pdev, instance);
>+
>+ /*
>+ * Add this controller to megasas_mgmt_info structure so that it
>+ * can be exported to management applications
>+ */
>+ megasas_mgmt_info.count++;
>+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index]
>= instance;
>+ megasas_mgmt_info.max_index++;
>+
>+ /*
>+ * Initiate AEN (Asynchronous Event Notification)
>+ */
>+ megasas_start_aen(instance);
>+
>+ /*
>+ * Register with SCSI mid-layer
>+ */
>+ if (megasas_io_attach(instance))
>+ goto fail_io_attach;
>+
>+ return 0;
>+
>+fail_io_attach:
>+ megasas_mgmt_info.count--;
>+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
>+ megasas_mgmt_info.max_index--;
>+
>+ pci_set_drvdata(pdev, NULL);
>+ megasas_disable_intr(instance->reg_set);
>+ free_irq(instance->pdev->irq, instance);
>+
>+ megasas_release_mfi(instance);
>+
>+fail_irq:
>+fail_init_mfi:
>+fail_alloc_dma_buf:
>+ if (instance->evt_detail)
>+ pci_free_consistent(pdev, sizeof(struct
>megasas_evt_detail),
>+ instance->evt_detail,
>instance->evt_detail_h);
>+
>+ if (instance->producer)
>+ pci_free_consistent(pdev, sizeof(u32),
>instance->producer,
>+
>instance->producer_h);
>+ if (instance->consumer)
>+ pci_free_consistent(pdev, sizeof(u32),
>instance->consumer,
>+
>instance->consumer_h);
>+ scsi_host_put(host);
>+
>+fail_alloc_instance:
>+fail_set_dma_mask:
>+ pci_disable_device(pdev);
>+
>+ return -ENODEV;
>+}
>+
>+/**
>+ * megasas_flush_cache - Requests FW to flush all its caches
>+ * @instance: Adapter soft state
>+ */
>+static void
>+megasas_flush_cache(struct megasas_instance *instance)
>+{
>+ struct megasas_cmd *cmd;
>+ struct megasas_dcmd_frame *dcmd;
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd)
>+ return;
>+
>+ dcmd = &cmd->frame->dcmd;
>+
>+ memset(dcmd->mbox, 0, MFI_MBOX_SIZE);
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0x0;
>+ dcmd->sge_count = 0;
>+ dcmd->flags = MFI_FRAME_DIR_NONE;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = 0;
>+ dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH;
>+ dcmd->mbox[0] = MR_FLUSH_CTRL_CACHE |
>+ MR_FLUSH_DISK_CACHE;
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ megasas_return_cmd(instance, cmd);
>+
>+ return;
>+}
>+
>+/**
>+ * megasas_shutdown_controller - Instructs FW to shutdown the
>controller
>+ * @instance: Adapter soft state
>+ */
>+static void
>+megasas_shutdown_controller(struct megasas_instance *instance)
>+{
>+ struct megasas_cmd *cmd;
>+ struct megasas_dcmd_frame *dcmd;
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd);
>+ return;
>+
>+ if (instance->aen_cmd)
>+ megasas_issue_blocked_abort_cmd(instance,
>instance->aen_cmd);
>+
>+ dcmd = &cmd->frame->dcmd;
>+
>+ memset( dcmd->mbox, 0, MFI_MBOX_SIZE );
>+
>+ dcmd->cmd = MFI_CMD_DCMD;
>+ dcmd->cmd_status = 0x0;
>+ dcmd->sge_count = 0;
>+ dcmd->flags = MFI_FRAME_DIR_NONE;
>+ dcmd->timeout = 0;
>+ dcmd->data_xfer_len = 0;
>+ dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN;
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ megasas_return_cmd(instance, cmd);
>+
>+ return;
>+}
>+
>+/**
>+ * megasas_detach_one - PCI hot"un"plug entry point
>+ * @pdev: PCI device structure
>+ */
>+static void
>+megasas_detach_one(struct pci_dev *pdev)
>+{
>+ int i;
>+ struct Scsi_Host *host;
>+ struct megasas_instance *instance;
>+
>+ instance = pci_get_drvdata(pdev);
>+ host = instance->host;
>+
>+ scsi_remove_host(instance->host);
>+ megasas_flush_cache(instance);
>+ megasas_shutdown_controller(instance);
>+
>+ /*
>+ * Take the instance off the instance array. Note that
>we will not
>+ * decrement the max_index. We let this array be sparse array
>+ */
>+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
>+ if (megasas_mgmt_info.instance[i] == instance) {
>+ megasas_mgmt_info.count--;
>+ megasas_mgmt_info.instance[i] = NULL;
>+
>+ break;
>+ }
>+ }
>+
>+ pci_set_drvdata(instance->pdev, NULL);
>+
>+ megasas_disable_intr(instance->reg_set);
>+
>+ free_irq(instance->pdev->irq, instance);
>+
>+ megasas_release_mfi(instance);
>+
>+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
>+ instance->evt_detail, instance->evt_detail_h);
>+
>+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
>+ instance->producer_h);
>+
>+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
>+ instance->consumer_h);
>+
>+ scsi_host_put(host);
>+
>+ pci_set_drvdata(pdev, NULL);
>+
>+ pci_disable_device(pdev);
>+
>+ return;
>+}
>+
>+/**
>+ * megasas_shutdown - Shutdown entry point
>+ * @device: Generic device structure
>+ */
>+static void
>+megasas_shutdown(struct device *device)
>+{
>+ struct megasas_instance *instance = (struct megasas_instance*)
>+ dev_get_drvdata(device);
>+ megasas_flush_cache(instance);
>+}
>+
>+/**
>+ * megasas_mgmt_open - char node "open" entry point
>+ */
>+static int
>+megasas_mgmt_open(struct inode *inode, struct file *filep)
>+{
>+ /*
>+ * Allow only those users with admin rights
>+ */
>+ if (!capable(CAP_SYS_ADMIN))
>+ return -EACCES;
>+
>+ return 0;
>+}
>+
>+/**
>+ * megasas_mgmt_release - char node "release" entry point
>+ */
>+static int
>+megasas_mgmt_release(struct inode *inode, struct file *filep)
>+{
>+ return 0;
>+}
>+
>+/**
>+ * megasas_mgmt_fasync - Async notifier registration from
>applications
>+ *
>+ * This function adds the calling process to a driver global
>queue. When an
>+ * event occurs, SIGIO will be sent to all processes in this queue.
>+ */
>+static int
>+megasas_mgmt_fasync(int fd, struct file *filep, int mode)
>+{
>+ int rc;
>+
>+ down( &megasas_async_queue_mutex );
>+
>+ rc = fasync_helper(fd, filep, mode, &megasas_async_queue);
>+
>+ up(&megasas_async_queue_mutex);
>+
>+ if (rc >0)
>+ return 0;
>+
>+ printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
>+
>+ return rc;
>+}
>+
>+/**
>+ * megasas_mgmt_fw_dcmd - Issues DCMD to the FW
>+ * @instance: Adapter soft state
>+ * @uioc: User's ioctl packet copied into
>kernel addr
>+ * @argp: User's ioctl packet in user address
>+ * @cmd: Command to be prepared and issued
>+ *
>+ * This function prepares direct command (DCMD) to FW from
>user's ioctl
>packet.
>+ * The driver allocates temporary buffer (if needed) for data transfer
>+ *
>+ * Note: The suffixes 'k' & 'u' mean 'kerne' and 'user' respectively
>+ */
>+static int
>+megasas_mgmt_fw_dcmd(struct megasas_instance *instance,
>struct iocpacket
>*uioc,
>+ void __user *argp, struct
>megasas_cmd *cmd)
>+{
>+ int rc = 0;
>+ void __user *ubuff;
>+ struct megasas_dcmd_frame *kdcmd;
>+ struct megasas_dcmd_frame __user *udcmd;
>+ struct megasas_dcmd_frame *cmd_dcmd;
>+ caddr_t kbuff;
>+ dma_addr_t kbuff_h;
>+ u32 xferlen;
>+ u8 user_64bit_sgl = 0;
>+
>+ cmd_dcmd = &cmd->frame->dcmd;
>+ kdcmd = (struct megasas_dcmd_frame*) &uioc->frame;
>+ udcmd = (struct megasas_dcmd_frame*)
>+ (((struct iocpacket*)argp)->frame);
>+
>+ if (kdcmd->flags & MFI_FRAME_SGL64 )
>+ user_64bit_sgl = 1;
>+
>+ if (!user_64bit_sgl) {
>+ xferlen = kdcmd->sgl.sge32[0].length;
>+ ubuff = (void __user*) (ulong)
>udcmd->sgl.sge32[0].phys_addr;
>+ }
>+ else {
>+ xferlen = kdcmd->sgl.sge64[0].length;
>+ ubuff = (void __user*) (ulong)
>udcmd->sgl.sge64[0].phys_addr;
>+ }
>+
>+ /*
>+ * Allocate internal buffer for data transfer
>+ */
>+ if (xferlen)
>+ kbuff = pci_alloc_consistent(instance->pdev, xferlen,
>&kbuff_h);
>+ else
>+ kbuff = NULL;
>+
>+ if (xferlen && !kbuff) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate
>memory for "
>+ "DCMD internal
>buffer \n");
>+ return -ENOMEM;
>+ }
>+
>+ if (xferlen && (kdcmd->flags & MFI_FRAME_DIR_WRITE)) {
>+
>+ if (copy_from_user(kbuff, ubuff, xferlen)) {
>+ printk( KERN_DEBUG "megasas: Failed to
>copy from "
>+ "application
>buffer\n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+ }
>+
>+ /*
>+ * Copy the frame sent by user into driver's frame
>+ */
>+ cmd_dcmd->cmd = kdcmd->cmd;
>+ cmd_dcmd->cmd_status = kdcmd->cmd_status;
>+ cmd_dcmd->sge_count = kdcmd->sge_count;
>+ cmd_dcmd->timeout = kdcmd->timeout;
>+ cmd_dcmd->data_xfer_len = kdcmd->data_xfer_len;
>+ cmd_dcmd->opcode = kdcmd->opcode;
>+
>+ memcpy( cmd_dcmd->mbox, kdcmd->mbox, MFI_MBOX_SIZE );
>+
>+ if (!user_64bit_sgl) {
>+ cmd_dcmd->flags = kdcmd->flags;
>+ cmd_dcmd->sgl.sge32[0].length =
>kdcmd->sgl.sge32[0].length;
>+ cmd_dcmd->sgl.sge32[0].phys_addr= kbuff_h;
>+ }
>+ else {
>+ cmd_dcmd->flags = kdcmd->flags
>|MFI_FRAME_SGL64;
>+ cmd_dcmd->sgl.sge64[0].length =
>kdcmd->sgl.sge64[0].length;
>+ cmd_dcmd->sgl.sge64[0].phys_addr= kbuff_h;
>+ }
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ if (copy_to_user(ubuff, kbuff, xferlen)) {
>+
>+ printk( KERN_DEBUG "megasas: Failed to copy "
>+ "to application buffer\n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+ if (copy_to_user(&udcmd->cmd_status, &cmd_dcmd->cmd_status,
>+ sizeof(u8))) {
>+ printk(KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer\n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+exit_label:
>+ pci_free_consistent(instance->pdev, xferlen, kbuff, kbuff_h);
>+ return rc;
>+}
>+
>+/**
>+ * megasas_mgmt_fw_dcdb - Prepares and issues DCDB
>+ * @instance: Adapter soft state
>+ * @uioc: User's ioctl packet copied into
>kernel addr
>+ * @argp: User's ioctl packet in user addr
>+ * @cmd: Free command from the command pool
>+ *
>+ * Note that the suffixes 'k' and 'u' mean 'kernel' and 'user'
>respectively.
>+ */
>+static int
>+megasas_mgmt_fw_dcdb(struct megasas_instance *instance,
>struct iocpacket
>*uioc,
>+ void __user *argp, struct
>megasas_cmd *cmd)
>+{
>+ int rc = 0;
>+ void __user *ubuff;
>+ void __user *usense;
>+ struct megasas_pthru_frame *kdcdb;
>+ struct megasas_pthru_frame __user *udcdb;
>+ struct megasas_pthru_frame *cmd_dcdb;
>+ caddr_t kbuff;
>+ dma_addr_t kbuff_h;
>+ caddr_t ksense;
>+ dma_addr_t ksense_h;
>+ u32 xferlen;
>+ u8 user_64bit_sgl = 0;
>+ u64 temp;
>+
>+ ksense = NULL;
>+ usense = NULL;
>+ cmd_dcdb = &cmd->frame->pthru;
>+ kdcdb = (struct megasas_pthru_frame*) &uioc->frame;
>+ udcdb = (struct megasas_pthru_frame*)
>+ (((struct iocpacket*)argp)->frame);
>+
>+ if (kdcdb->flags & MFI_FRAME_SGL64 )
>+ user_64bit_sgl = 1;
>+
>+ if (!user_64bit_sgl) {
>+ xferlen = kdcdb->sgl.sge32[0].length;
>+ ubuff = (void __user*)(ulong)
>(udcdb->sgl.sge32[0].phys_addr);
>+ }
>+ else {
>+ xferlen = kdcdb->sgl.sge64[0].length;
>+ ubuff = (void __user*) (ulong)
>udcdb->sgl.sge64[0].phys_addr;
>+ }
>+
>+ /*
>+ * Allocate internal buffer for data transfer
>+ */
>+ if (xferlen)
>+ kbuff = pci_alloc_consistent(instance->pdev, xferlen,
>&kbuff_h);
>+ else
>+ kbuff = NULL;
>+
>+ if (xferlen && !kbuff) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for DCDB internal
>buffer\n");
>+ return -ENOMEM;
>+ }
>+
>+ memset(kbuff, 0, xferlen);
>+
>+ /*
>+ * Allocate internal buffer for request sense
>+ */
>+ if (kdcdb->sense_len) {
>+ ksense = pci_alloc_consistent(instance->pdev,
>kdcdb->sense_len,
>+
>&ksense_h);
>+ if (!ksense) {
>+ rc = -ENOMEM;
>+ goto exit_label;
>+ }
>+
>+ temp = kdcdb->sense_buf_phys_addr_hi;
>+ temp = temp << 32 | kdcdb->sense_buf_phys_addr_lo;
>+
>+ usense = (void __user*)(ulong) temp;
>+
>+ }
>+
>+ if (xferlen && (kdcdb->flags & MFI_FRAME_DIR_WRITE)) {
>+
>+ if (copy_from_user(kbuff, ubuff, xferlen)) {
>+ printk(KERN_DEBUG "megasas: Failed to
>copy from "
>+ "application
>buffer \n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+ }
>+
>+ memcpy(cmd_dcdb, kdcdb, MEGAMFI_FRAME_SIZE);
>+ cmd_dcdb->context = cmd->index;
>+ cmd_dcdb->sge_count = 1;
>+
>+ if (!user_64bit_sgl) {
>+ cmd_dcdb->flags = kdcdb->flags;
>+ cmd_dcdb->sgl.sge32[0].length =
>kdcdb->sgl.sge32[0].length;
>+ cmd_dcdb->sgl.sge32[0].phys_addr= kbuff_h;
>+ }
>+ else {
>+ cmd_dcdb->flags = kdcdb->flags
>|MFI_FRAME_SGL64;
>+ cmd_dcdb->sgl.sge64[0].length =
>kdcdb->sgl.sge64[0].length;
>+ cmd_dcdb->sgl.sge64[0].phys_addr= kbuff_h;
>+ }
>+
>+ cmd_dcdb->sense_buf_phys_addr_hi = 0;
>+ cmd_dcdb->sense_buf_phys_addr_lo = ksense_h ;
>+
>+ cmd->sync_cmd = 1;
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ if (xferlen && (kdcdb->flags & MFI_FRAME_DIR_READ)) {
>+
>+ if (copy_to_user( ubuff, kbuff, xferlen)) {
>+
>+ printk(KERN_DEBUG "megasas: Failed to copy "
>+ "to application buffer \n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+ }
>+
>+ if (copy_to_user(&udcdb->cmd_status, &cmd_dcdb->cmd_status,
>+ sizeof(u8))) {
>+ printk(KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer\n" );
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+ if (kdcdb->sense_len) {
>+ if (copy_to_user(usense, ksense, kdcdb->sense_len)) {
>+ printk(KERN_DEBUG "megasas: Failed to copy "
>+ "to application buffer \n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+ }
>+
>+exit_label:
>+ if (ksense)
>+ pci_free_consistent(instance->pdev, kdcdb->sense_len,
>ksense,
>+
>ksense_h);
>+ if (kbuff)
>+ pci_free_consistent(instance->pdev, xferlen, kbuff,
>kbuff_h);
>+
>+ return rc;
>+}
>+
>+/**
>+ * megasas_mgmt_fw_smp - Issues passthrough cmds to SAS devices
>+ * @instance: Adapter soft state
>+ * @uioc: User's ioctl packet in kernel address
>+ * @argp: User's ioctl packet in user address
>+ * @cmd: Command from free pool
>+ *
>+ * SMP frames have two SG elements at the end - response and
>request ( in
>that
>+ * order). This function allocates temporary DMA buffers for these SG
>elements.
>+ *
>+ * Note that the suffixes 'k' and 'u' mean 'kernel' and 'user'
>respectively.
>+ */
>+static int
>+megasas_mgmt_fw_smp(struct megasas_instance *instance, struct
>iocpacket
>*uioc,
>+ void __user *argp, struct
>megasas_cmd *cmd)
>+{
>+ int rc = 0;
>+ struct megasas_smp_frame *ksmp;
>+ struct megasas_smp_frame __user *usmp;
>+ struct megasas_smp_frame *cmd_smp;
>+
>+ caddr_t kreq;
>+ caddr_t kresp;
>+ dma_addr_t kreq_h;
>+ dma_addr_t kresp_h;
>+ void __user *ureq;
>+ void __user *uresp;
>+ u32 req_len;
>+ u32 resp_len;
>+
>+ u8 user_64bit_sgl = 0;
>+
>+ cmd_smp = &cmd->frame->smp;
>+ ksmp = (struct megasas_smp_frame*) &uioc->frame;
>+ usmp = (struct megasas_smp_frame*)
>+ (((struct iocpacket*)argp)->frame);
>+
>+ if (ksmp->flags & MFI_FRAME_SGL64 )
>+ user_64bit_sgl = 1;
>+
>+ if (!user_64bit_sgl) {
>+ resp_len = ksmp->sgl.sge32[0].length;
>+ req_len = ksmp->sgl.sge32[1].length;
>+
>+ uresp = (void __user*) ((ulong)
>usmp->sgl.sge32[0].phys_addr);
>+ ureq = (void __user*) ((ulong)
>usmp->sgl.sge32[1].phys_addr);
>+ }
>+ else {
>+ resp_len = ksmp->sgl.sge64[0].length;
>+ req_len = ksmp->sgl.sge64[1].length;
>+
>+ uresp = (void __user*) ((ulong)
>usmp->sgl.sge64[0].phys_addr);
>+ ureq = (void __user*) ((ulong)
>usmp->sgl.sge64[1].phys_addr);
>+ }
>+
>+ if (!req_len || !resp_len) {
>+ return -EINVAL;
>+ }
>+
>+ /*
>+ * Allocate kernel buffers for SMP request and response
>+ */
>+ kreq = NULL;
>+ kresp = NULL;
>+
>+ kreq = pci_alloc_consistent(instance->pdev, req_len, &kreq_h);
>+
>+ if (!kreq) {
>+
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for SMP request
>\n");
>+ rc = -ENOMEM;
>+ goto exit_label;
>+ }
>+
>+ kresp = pci_alloc_consistent(instance->pdev, resp_len,
>&kresp_h);
>+
>+ if(!kresp) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for
>SMP response
>\n");
>+ rc = -ENOMEM;
>+ goto exit_label;
>+ }
>+
>+ if (copy_from_user(kreq, ureq, req_len)) {
>+ printk(KERN_DEBUG "megasas: Failed to copy from "
>+ "application buffer \n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+ memcpy (cmd_smp, ksmp, MEGAMFI_FRAME_SIZE);
>+ cmd_smp->context = cmd->index;
>+
>+ if (!user_64bit_sgl) {
>+ cmd_smp->flags = ksmp->flags;
>+ cmd_smp->sgl.sge32[0].length = resp_len;
>+ cmd_smp->sgl.sge32[0].phys_addr = kresp_h;
>+ cmd_smp->sgl.sge32[1].length = req_len;
>+ cmd_smp->sgl.sge32[1].phys_addr = kreq_h;
>+ }
>+ else {
>+ cmd_smp->flags = ksmp->flags |
>+ MFI_FRAME_SGL64;
>+ cmd_smp->sgl.sge64[0].length = resp_len;
>+ cmd_smp->sgl.sge64[0].phys_addr = kresp_h;
>+ cmd_smp->sgl.sge64[1].length = req_len;
>+ cmd_smp->sgl.sge64[1].phys_addr = kreq_h;
>+ }
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ if (copy_to_user(uresp, kresp, resp_len)) {
>+ printk(KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer \n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+ if (copy_to_user(&usmp->cmd_status, &cmd_smp->cmd_status,
>+ sizeof(u8))) {
>+ printk(KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer \n");
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+exit_label:
>+
>+ if (kreq)
>+ pci_free_consistent(instance->pdev, req_len,
>kreq, kreq_h);
>+ if (kresp)
>+ pci_free_consistent(instance->pdev, resp_len, kresp,
>kresp_h);
>+
>+ return rc;
>+}
>+
>+/**
>+ * megasas_mgmt_fw_stp - Issues passthrough cmds to SATA drives
>+ * @instance: Adapter soft state
>+ * @uioc: User ioctl packet in kernel address
>+ * @argp: User ioctl packet in user address
>+ * @cmd: Command from free pool
>+ *
>+ * Note that the suffixes 'k' and 'u' mean 'kernel' and 'user'
>respectively.
>+ */
>+static int
>+megasas_mgmt_fw_stp(struct megasas_instance *instance, struct
>iocpacket
>*uioc,
>+ void __user *argp, struct
>megasas_cmd *cmd)
>+{
>+ int rc = 0;
>+ struct megasas_stp_frame *kstp;
>+ struct megasas_stp_frame __user *ustp;
>+ struct megasas_stp_frame *cmd_stp;
>+
>+ caddr_t kdata;
>+ caddr_t kresp;
>+ dma_addr_t kdata_h;
>+ dma_addr_t kresp_h;
>+ void __user *udata;
>+ void __user *uresp;
>+ u32 data_len;
>+ u32 resp_len;
>+
>+ u8 user_64bit_sgl = 0;
>+
>+ cmd_stp = &cmd->frame->stp;
>+ kstp = (struct megasas_stp_frame *) &uioc->frame;
>+ ustp = (struct megasas_stp_frame *)
>+ (((struct iocpacket *)argp)->frame);
>+
>+ if (kstp->flags & MFI_FRAME_SGL64 )
>+ user_64bit_sgl = 1;
>+
>+ if (!user_64bit_sgl) {
>+
>+ resp_len = ustp->sgl.sge32[0].length;
>+ data_len = ustp->sgl.sge32[1].length;
>+
>+ uresp = (void __user*) ((ulong)
>ustp->sgl.sge32[0].phys_addr);
>+ udata = (void __user*) ((ulong)
>ustp->sgl.sge32[1].phys_addr);
>+ }
>+ else {
>+ resp_len = ustp->sgl.sge64[0].length;
>+ data_len = ustp->sgl.sge64[1].length;
>+
>+ uresp = (void __user*) ((ulong)
>ustp->sgl.sge64[0].phys_addr);
>+ udata = (void __user*) ((ulong)
>ustp->sgl.sge64[1].phys_addr);
>+ }
>+
>+ if (!data_len || !resp_len) {
>+ return -EINVAL;
>+ }
>+
>+ /*
>+ * Allocate kernel buffers for SMP request and response
>+ */
>+
>+ kdata = NULL;
>+ kresp = NULL;
>+
>+ kdata = pci_alloc_consistent(instance->pdev, data_len,
>&kdata_h);
>+
>+ if(!kdata) {
>+
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for STP request
>\n");
>+ rc = -ENOMEM;
>+ goto exit_label;
>+ }
>+
>+ kresp = pci_alloc_consistent(instance->pdev, resp_len,
>&kresp_h);
>+
>+ if(!kresp) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for
>STP response
>\n");
>+ rc = -ENOMEM;
>+ goto exit_label;
>+ }
>+
>+ memcpy (cmd_stp, kstp, MEGAMFI_FRAME_SIZE);
>+ cmd_stp->context = cmd->index;
>+
>+ if (!user_64bit_sgl) {
>+ cmd_stp->flags = kstp->flags;
>+ cmd_stp->sgl.sge32[0].length = resp_len;
>+ cmd_stp->sgl.sge32[0].phys_addr = kresp_h;
>+ cmd_stp->sgl.sge32[1].length = data_len;
>+ cmd_stp->sgl.sge32[1].phys_addr = kdata_h;
>+ }
>+ else {
>+ cmd_stp->flags = kstp->flags |
>+ MFI_FRAME_SGL64;
>+ cmd_stp->sgl.sge64[0].length = resp_len;
>+ cmd_stp->sgl.sge64[0].phys_addr = kresp_h;
>+ cmd_stp->sgl.sge64[1].length = data_len;
>+ cmd_stp->sgl.sge64[1].phys_addr = kdata_h;
>+ }
>+
>+ megasas_issue_blocked_cmd(instance, cmd);
>+
>+ if (copy_to_user(uresp, kresp, resp_len)) {
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer \n" );
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+ if (copy_to_user(udata, kdata, data_len)) {
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer \n" );
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+ if (copy_to_user(&ustp->cmd_status, &cmd_stp->cmd_status,
>+ sizeof(u8))) {
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application buffer \n" );
>+ rc = -EFAULT;
>+ goto exit_label;
>+ }
>+
>+exit_label:
>+
>+ if (kdata)
>+ pci_free_consistent(instance->pdev, data_len, kdata,
>kdata_h);
>+ if (kresp)
>+ pci_free_consistent(instance->pdev, resp_len, kresp,
>kresp_h);
>+
>+ return rc;
>+}
>+
>+/**
>+ * megasas_mgmt_fw_ioctl - Issues management ioctls to FW
>+ * @instance: Adapter soft state
>+ * @argp: User's ioctl packet
>+ */
>+static int
>+megasas_mgmt_fw_ioctl(struct megasas_instance *instance, void
>__user *argp)
>+{
>+ int ret;
>+ struct iocpacket *uioc;
>+ struct megasas_header *hdr;
>+ struct megasas_cmd *cmd;
>+
>+ uioc = kmalloc(sizeof(struct iocpacket), GFP_KERNEL);
>+
>+ if (!uioc) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for application IOCTL
>packet\n");
>+ return -ENOMEM;
>+ }
>+
>+ if (copy_from_user(uioc, argp, sizeof(struct iocpacket))) {
>+ printk( KERN_DEBUG "megasas: Failed to copy from "
>+ "application
>buffer \n" );
>+ return -EFAULT;
>+ }
>+
>+ cmd = megasas_get_cmd(instance);
>+
>+ if (!cmd) {
>+ printk(KERN_DEBUG "megasas: Failed to get a cmd
>packet\n");
>+ return -ENOMEM;
>+ }
>+
>+ hdr = (struct megasas_header*) uioc->frame;
>+
>+ switch( hdr->cmd ) {
>+
>+ case MFI_CMD_DCMD:
>+ ret = megasas_mgmt_fw_dcmd(instance, uioc, argp,
>cmd);
>+ break;
>+
>+ case MFI_CMD_PD_SCSI_IO:
>+ case MFI_CMD_LD_SCSI_IO:
>+ ret = megasas_mgmt_fw_dcdb(instance, uioc, argp,
>cmd);
>+ break;
>+
>+ case MFI_CMD_SMP:
>+ ret = megasas_mgmt_fw_smp(instance, uioc, argp,
>cmd);
>+ break;
>+
>+ case MFI_CMD_STP:
>+ ret = megasas_mgmt_fw_stp(instance, uioc, argp,
>cmd);
>+ break;
>+
>+ default:
>+ ret = -EINVAL;
>+ break;
>+ }
>+
>+ megasas_return_cmd( instance, cmd );
>+ return ret;
>+}
>+
>+/**
>+ * megasas_fill_drv_ver - Fills the driver version info for
>application
>+ * @dv: Driver version information
>+ */
>+static void
>+megasas_fill_drv_ver(struct megasas_drv_ver *dv)
>+{
>+ memset( dv, 0, sizeof(*dv) );
>+
>+ memcpy(dv->signature, "$LSI LOGIC$", strlen("$LSI
>LOGIC$") );
>+ memcpy(dv->os_name, "Linux", strlen("Linux")
> );
>+ memcpy(dv->os_ver, "Ver Indpndt", strlen("ver
>indpndt") );
>+ memcpy(dv->drv_name, "megaraid_sas",
>strlen("megaraid_sas") );
>+ memcpy(dv->drv_ver,
>MEGASAS_VERSION,strlen(MEGASAS_VERSION) );
>+
>memcpy(dv->drv_rel_date,MEGASAS_RELDATE,strlen(MEGASAS_R
ELDATE) );
>+}
>+
>+/**
>+ * megasas_mgmt_ioctl - char node ioctl entry point
>+ *
>+ * Few ioctl commands should be handled by driver itself
>(driver ioctls)
>and
>+ * the rest should be converted into appropriate commands for FW and
>issued.
>+ */
>+static int
>+megasas_mgmt_ioctl(struct inode *inode, struct file* filep,
>+ unsigned int cmd, unsigned long arg )
>+{
>+ int i;
>+ int j;
>+ int rc;
>+ u8 fw_status;
>+ struct iocpacket *uioc;
>+ void __user *argp;
>+ void __user *udata_addr;
>+ u8 user_64bit_sgl = 0;
>+ u32 opcode;
>+
>+ u32 seq_num;
>+ u32 class_locale_word;
>+ u32 *mbox_word;
>+
>+ struct megasas_instance *instance;
>+ struct megasas_dcmd_frame *kdcmd;
>+ struct megasas_dcmd_frame __user *udcmd;
>+ struct megasas_drv_ver *dv;
>+ struct pci_dev *pdev;
>+
>+ argp = (void __user*) arg;
>+ uioc = kmalloc(sizeof(struct iocpacket), GFP_KERNEL);
>+
>+ if (!uioc) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate memory "
>+ "for application IOCTL
>packet\n");
>+ return -ENOMEM;
>+ }
>+
>+ if (copy_from_user(uioc, argp, sizeof(struct iocpacket))) {
>+ printk( KERN_DEBUG "megasas: Failed to copy from "
>+ "application
>buffer \n" );
>+ return -EINVAL;
>+ }
>+
>+ if (strncmp(uioc->signature, IOC_SIGNATURE,
>strlen(IOC_SIGNATURE))
>!=0){
>+ printk( KERN_DEBUG "megasas: Invalid ioctl
>signature\n" );
>+ return -EINVAL;
>+ }
>+
>+ if (uioc->version != 0) {
>+ printk( KERN_DEBUG "megasas: Invalid ioctl
>version %d\n",
>+
>uioc->version );
>+ return -EINVAL;
>+ }
>+
>+ instance = NULL;
>+ kdcmd = (struct megasas_dcmd_frame*) uioc->frame;
>+ udcmd = (struct megasas_dcmd_frame*)
>+ (((struct iocpacket*)argp)->frame);
>+
>+ /*
>+ * Find out if user has used 32 or 64 bit SGL
>+ */
>+ if (kdcmd->flags & MFI_FRAME_SGL64 )
>+ user_64bit_sgl = 1;
>+
>+ if (!user_64bit_sgl)
>+ udata_addr = (void __user*)
>+
>((ulong)kdcmd->sgl.sge32[0].phys_addr);
>+ else
>+ udata_addr = (void __user*)
>+ ((ulong)
>kdcmd->sgl.sge64[0].phys_addr);
>+
>+ i = ((uioc->controller_id & 0xF0) >> 4) - 1;
>+
>+ if (i < megasas_mgmt_info.max_index)
>+ instance = megasas_mgmt_info.instance[i];
>+ else
>+ instance = NULL;
>+
>+ if ((uioc->control_code == MR_DRIVER_IOCTL_LINUX) ||
>+ (uioc->control_code == MR_DRIVER_IOCTL_COMMON)) {
>+ /*
>+ * If MR_DRIVER_IOCTL_LINUX or MR_DRIVER_IOCTL_COMMON
>+ * look at dcmd->opcode for the actual operation
>+ */
>+ opcode = kdcmd->opcode;
>+ }
>+ else {
>+ /* FW Command */
>+ opcode = uioc->control_code;
>+ }
>+
>+ switch (opcode) {
>+
>+ case MR_DRIVER_IOCTL_DRIVER_VERSION:
>+
>+ dv = kmalloc(sizeof(struct megasas_drv_ver),
>GFP_KERNEL);
>+
>+ if (!dv) {
>+ printk(KERN_DEBUG "megasas: Failed to allocate "
>+ "memory for driver
>version\n");
>+ return -ENOMEM;
>+ }
>+
>+ megasas_fill_drv_ver(dv);
>+
>+ if (copy_to_user(udata_addr, dv,
>+ sizeof(struct
>megasas_drv_ver))) {
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application
>buffer \n" );
>+ return -EFAULT;
>+ }
>+
>+ rc = 0;
>+ fw_status = MFI_STAT_OK;
>+
>+ if (copy_to_user( &udcmd->cmd_status, &fw_status,
>+ sizeof(u8))) {
>+ rc = -EFAULT;
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application
>buffer \n" );
>+ }
>+
>+ break;
>+
>+ case MR_LINUX_GET_ADAPTER_COUNT:
>+
>+ if (copy_to_user(udata_addr, &megasas_mgmt_info.count,
>+ sizeof(u16))) {
>+ return -EFAULT;
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application
>buffer \n" );
>+ }
>+
>+ rc = 0;
>+ fw_status = MFI_STAT_OK;
>+
>+ if (copy_to_user(&udcmd->cmd_status, &fw_status,
>+ sizeof(u8))) {
>+ rc = -EFAULT;
>+ printk( KERN_DEBUG "megasas: Failed to copy to "
>+ "application
>buffer \n" );
>+ }
>+
>+ break;
>+
>+ case MR_LINUX_GET_ADAPTER_MAP:
>+ /*
>+ * The applications _don't_ address our
>controllers using
>zero
>+ * based index. We give them an array of 16-bit unique
>handles.
>+ * These unique handles are simple encryptions of the
>indices
>+ *
>+ * Encrypting logic - which converts a
>controller index into
>a
>+ * 16-bit value - is simply (index + 1) << 4 | 0x0F.
>+ *
>+ * Note also when controllers are hot plugged, our
>controller
>+ * array (megasas_mgmt_info) becomes sparse. We
>don't reuse
>the
>+ * vacated slots.
>+ */
>+ memset(megasas_mgmt_info.map, 0,
>+ sizeof(u16) * MAX_MGMT_ADAPTERS);
>+
>+ j = 0;
>+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
>+ if (megasas_mgmt_info.instance[i]) {
>+ megasas_mgmt_info.map[j].unique_hndl =
>+ ((i + 1) << 4) | 0xF;
>+
>+ pdev =
>megasas_mgmt_info.instance[i]->pdev;
>+
>+ megasas_mgmt_info.map[j].bus_devfn =
>+ ((pdev->bus->number) << 16 |
>+ (PCI_SLOT(pdev->devfn)) << 8 |
>+
>(PCI_FUNC(pdev->devfn))) & 0xFFFFFF;
>+
>+ j++;
>+ }
>+ }
>+
>+ if ((j) && (copy_to_user(udata_addr,
>megasas_mgmt_info.map,
>+ sizeof(struct megasas_adp_map) * j))) {
>+
>+ printk(KERN_DEBUG "megasas: Failed to copy to "
>+ "application
>buffer \n" );
>+ return -EFAULT;
>+ }
>+
>+ fw_status = MFI_STAT_OK;
>+ rc = 0;
>+
>+ if (copy_to_user( &udcmd->cmd_status, &fw_status,
>+ sizeof(u8))) {
>+ rc = -EFAULT;
>+ printk(KERN_DEBUG "megasas: Failed to copy to "
>+ "application
>buffer \n" );
>+ }
>+
>+ break;
>+
>+ case MR_LINUX_GET_AEN:
>+
>+ if (!instance) {
>+ printk( KERN_DEBUG "megasas: Invalid
>instance \n" );
>+ return -ENODEV;
>+ }
>+
>+
>+ spin_lock(&instance->aen_lock);
>+
>+ mbox_word = (u32*) kdcmd->mbox;
>+ seq_num = mbox_word[0];
>+ class_locale_word = mbox_word[1];
>+
>+ rc = megasas_register_aen(instance, seq_num,
>class_locale_word);
>+
>+ spin_unlock(&instance->aen_lock);
>+
>+ break;
>+
>+ case IOC_CMD_FIRMWARE:
>+
>+ if (!instance) {
>+ printk(KERN_DEBUG "megasas: Invalid
>instance \n");
>+ return -ENODEV;
>+ }
>+
>+ rc = megasas_mgmt_fw_ioctl(instance, argp);
>+
>+ break;
>+
>+ default:
>+ return -ENOTTY;
>+ }
>+
>+ return rc;
>+}
>+
>+#ifdef CONFIG_COMPAT
>+/**
>+ * megasas_compat_ioctl - Handles conversions from 32-bit apps
>+ */
>+static int
>+megasas_compat_ioctl(struct file *filep, unsigned int cmd,
>unsigned long
>arg)
>+{
>+ return megasas_mgmt_ioctl(NULL, filep, cmd, arg);
>+}
>+#endif
>+
>+/*
>+ * File operations structure for management interface
>+ */
>+static struct file_operations megasas_mgmt_fops = {
>+ .owner = THIS_MODULE,
>+ .open = megasas_mgmt_open,
>+ .release = megasas_mgmt_release,
>+ .fasync = megasas_mgmt_fasync,
>+ .ioctl = megasas_mgmt_ioctl,
>+#ifdef CONFIG_COMPAT
>+ .compat_ioctl = megasas_compat_ioctl,
>+#endif
>+};
>+
>+/*
>+ * PCI hotplug support registration structure
>+ */
>+static struct pci_driver megasas_pci_driver = {
>+
>+ .name = "megaraid_sas",
>+ .id_table = megasas_pci_table,
>+ .probe = megasas_probe_one,
>+ .remove = __devexit_p(megasas_detach_one),
>+ .driver = {
>+ .shutdown = megasas_shutdown,
>+ }
>+};
>+
>+/**
>+ * megasas_init - Driver load entry point
>+ */
>+static int __init
>+megasas_init(void)
>+{
>+ int rval;
>+
>+ /*
>+ * Announce driver version and other information
>+ */
>+ printk( KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
>+ MEGASAS_EXT_VERSION);
>+
>+ /*
>+ * Register character device node
>+ */
>+ rval = register_chrdev(0, "megaraid_sas_ioctl",
>&megasas_mgmt_fops);
>+
>+ if (rval < 0) {
>+ printk(KERN_DEBUG "megasas: failed to open
>device node\n");
>+ return rval;
>+ }
>+
>+ megasas_mgmt_majorno = rval;
>+
>+ /*
>+ * Register ourselves as PCI hotplug module
>+ */
>+ rval = pci_module_init(&megasas_pci_driver);
>+
>+ if(rval) {
>+ printk(KERN_DEBUG "megasas: PCI hotplug
>regisration failed
>\n");
>+ unregister_chrdev(megasas_mgmt_majorno,
>"megaraid_sas_ioctl");
>+ }
>+
>+ return rval;
>+}
>+
>+/**
>+ * megasas_exit - Driver unload entry point
>+ */
>+static void __exit
>+megasas_exit(void)
>+{
>+ pci_unregister_driver(&megasas_pci_driver);
>+ unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
>+
>+ return;
>+}
>+
>+module_init(megasas_init);
>+module_exit(megasas_exit);
>+
>-
>To unsubscribe from this list: send the line "unsubscribe
>linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-06-04 08:07    [W:0.175 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site