lkml.org 
[lkml]   [2005]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    SubjectRe: 2.6.12 breaks 8139cp
    Date
    On Thursday 23 June 2005 1:50 am, Pierre Ossman wrote:
    > >On Wednesday 22 June 2005 3:03 pm, Pierre Ossman wrote:
    > >>Upgrading from 2.6.11 to 2.6.12 caused my 8139cp network card to stop
    > >>working. No error messages are emitted and everything seems to work
    > >>(from the local computers point of view). But nothing can be recieved
    > >>from the network.
    >
    > dmesg:s included. But they don't really differ more than some cosmetic
    > changes in the output strings.
    >
    > The problem is I can't find anything that differs. 2.6.12 behaves more
    > or less like someone cut of the rx pins in the connector. ifconfig
    > doesn't report any errors so it isn't a problem with packets getting
    > dropped. tcpdump only shows the outgoing packets.

    Your 2.6.11 dmesg mentions the VIA IRQ fixup, but the 2.6.12 one
    doesn't. I bet something's broken there.

    Can you try the attached debugging patch? And please collect the
    output of lspci, too.
    Index: work/drivers/pci/quirks.c
    ===================================================================
    --- work.orig/drivers/pci/quirks.c 2005-06-21 13:43:29.000000000 -0600
    +++ work/drivers/pci/quirks.c 2005-06-23 10:40:55.000000000 -0600
    @@ -510,7 +510,7 @@
    pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
    }
    }
    -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
    +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, quirk_via_irq);

    /*
    * PIIX3 USB: We have to disable USB interrupts that are
    \
     
     \ /
      Last update: 2005-06-23 19:51    [W:5.784 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site