lkml.org 
[lkml]   [2005]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.12-mm1
    Dominik Brodowski a écrit :
    > Did you modify the .config in between?

    I just checked carrefully which versions do work.
    It seems that this breakage appeared in rc6-mm1 with the same
    config than a working rc5-mm2.
    This config is attached with rc5-mm2 dmesg.

    Brice

    PS: I know I'd got a rc6-mm1 to work but I can't find my .config

    [4294667.296000] Linux version 2.6.12-rc5-mm2=LoulousMobile (bgoglin@puligny) (version gcc 3.3.5 (Debian 1:3.3.5-13)) #9 Mon Jun 20 15:01:22 CEST 2005
    [4294667.296000] BIOS-provided physical RAM map:
    [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [4294667.296000] BIOS-e820: 0000000000100000 - 0000000027fd0000 (usable)
    [4294667.296000] BIOS-e820: 0000000027fd0000 - 0000000027ff0c00 (reserved)
    [4294667.296000] BIOS-e820: 0000000027ff0c00 - 0000000027ffc000 (ACPI NVS)
    [4294667.296000] BIOS-e820: 0000000027ffc000 - 0000000028000000 (reserved)
    [4294667.296000] 639MB LOWMEM available.
    [4294667.296000] On node 0 totalpages: 163792
    [4294667.296000] DMA zone: 4096 pages, LIFO batch:1
    [4294667.296000] Normal zone: 159696 pages, LIFO batch:31
    [4294667.296000] HighMem zone: 0 pages, LIFO batch:1
    [4294667.296000] DMI 2.3 present.
    [4294667.296000] ACPI: RSDP (v000 COMPAQ ) @ 0x000f9970
    [4294667.296000] ACPI: RSDT (v001 COMPAQ CPQ0030 0x31120320 CPQ 0x00000001) @ 0x27ff0c84
    [4294667.296000] ACPI: FADT (v002 COMPAQ CPQ0030 0x00000002 CPQ 0x00000001) @ 0x27ff0c00
    [4294667.296000] ACPI: SSDT (v001 COMPAQ CPQCPU 0x00001001 MSFT 0x0100000e) @ 0x27ff7bcb
    [4294667.296000] ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x27ff7c16
    [4294667.296000] ACPI: DSDT (v001 COMPAQ EVON600C 0x00010000 MSFT 0x0100000e) @ 0x00000000
    [4294667.296000] ACPI: PM-Timer IO Port: 0x1008
    [4294667.296000] Allocating PCI resources starting at 28000000 (gap: 28000000:d8000000)
    [4294667.296000] Built 1 zonelists
    [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
    [4294667.296000] mapped APIC to ffffd000 (01b42000)
    [4294667.296000] Initializing CPU#0
    [4294667.296000] Kernel command line: root=/dev/hda2 ro
    [4294667.296000] CPU 0 irqstacks, hard=c04a2000 soft=c04a1000
    [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
    [4294667.296000] Detected 996.931 MHz processor.
    [4294667.296000] Using pmtmr for high-res timesource
    [4294667.296000] Console: colour VGA+ 80x25
    [4294670.097000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [4294670.099000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [4294670.151000] Memory: 638248k/655168k available (2317k kernel code, 16400k reserved, 1192k data, 180k init, 0k highmem)
    [4294670.151000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [4294670.211000] Calibrating delay using timer specific routine.. 1994.53 BogoMIPS (lpj=997268)
    [4294670.211000] Mount-cache hash table entries: 512
    [4294670.211000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
    [4294670.211000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
    [4294670.211000] CPU: L1 I cache: 16K, L1 D cache: 16K
    [4294670.211000] CPU: L2 cache: 512K
    [4294670.211000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
    [4294670.211000] Intel machine check architecture supported.
    [4294670.211000] Intel machine check reporting enabled on CPU#0.
    [4294670.211000] CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
    [4294670.211000] Enabling fast FPU save and restore... done.
    [4294670.211000] Enabling unmasked SIMD FPU exception support... done.
    [4294670.211000] Checking 'hlt' instruction... OK.
    [4294670.216000] tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired
    [4294670.335000] Parsing all Control Methods:..........................................................................................................................................................................................................................................................................
    [4294670.648000] Table [DSDT](id F006) - 833 Objects with 89 Devices 266 Methods 26 Regions
    [4294670.649000] Parsing all Control Methods:.
    [4294670.650000] Table [SSDT](id F003) - 3 Objects with 0 Devices 1 Methods 0 Regions
    [4294670.651000] Parsing all Control Methods:..
    [4294670.654000] Table [SSDT](id F004) - 4 Objects with 0 Devices 2 Methods 0 Regions
    [4294670.654000] ACPI Namespace successfully loaded at root c04db620
    [4294670.654000] ACPI: setting ELCR to 0200 (from 0800)
    [4294670.716000] evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful
    [4294670.716000] softlockup thread 0 started up.
    [4294670.717000] NET: Registered protocol family 16
    [4294670.718000] PCI: PCI BIOS revision 2.10 entry at 0xf04dd, last bus=4
    [4294670.718000] PCI: Using configuration type 1
    [4294670.718000] mtrr: v2.0 (20020519)
    [4294670.719000] ACPI: Subsystem revision 20050309
    [4294670.722000] evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C13E (name not of form _Lxx or _Exx)
    [4294670.722000] evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C18F (name not of form _Lxx or _Exx)
    [4294670.722000] evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C1DC (name not of form _Lxx or _Exx)
    [4294670.731000] evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
    [4294670.732000] evgpeblk-0987 [06] ev_create_gpe_block : Found 3 Wake, Enabled 1 Runtime GPEs in this block
    [4294670.732000] evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C13E (name not of form _Lxx or _Exx)
    [4294670.732000] evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C18F (name not of form _Lxx or _Exx)
    [4294670.732000] evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C1DC (name not of form _Lxx or _Exx)
    [4294670.736000] evgpeblk-0979 [06] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9
    [4294670.736000] evgpeblk-0987 [06] ev_create_gpe_block : Found 2 Wake, Enabled 5 Runtime GPEs in this block
    [4294670.758000] Completing Region/Field/Buffer/Package initialization:..................................................................................................
    [4294670.861000] Initialized 25/26 Regions 0/0 Fields 26/26 Buffers 47/56 Packages (849 nodes)
    [4294670.861000] Executing all Device _STA and_INI methods:...........................................................................................
    [4294671.564000] 91 Devices found containing: 91 _STA, 8 _INI methods
    [4294671.564000] ACPI: Interpreter enabled
    [4294671.564000] ACPI: Using PIC for interrupt routing
    [4294671.568000] ACPI: PCI Root Bridge [C03E] (0000:00)
    [4294671.568000] PCI: Probing PCI hardware (bus 00)
    [4294671.568000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    [4294671.568000] Boot video device is 0000:01:00.0
    [4294671.569000] ACPI: PCI Interrupt Routing Table [\_SB_.C03E._PRT]
    [4294671.577000] ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C03F._PRT]
    [4294671.582000] ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C052._PRT]
    [4294671.696000] ACPI: Power Resource [C14E] (on)
    [4294671.760000] ACPI: Power Resource [C167] (on)
    [4294671.818000] ACPI: Power Resource [C16B] (on)
    [4294671.825000] ACPI: Power Resource [C174] (on)
    [4294671.862000] ACPI: PCI Interrupt Link [C0BA] (IRQs 5 10 *11)
    [4294671.880000] ACPI: PCI Interrupt Link [C0BB] (IRQs 5 10 *11)
    [4294671.898000] ACPI: PCI Interrupt Link [C0BC] (IRQs 5 10 *11)
    [4294671.917000] ACPI: PCI Interrupt Link [C0BD] (IRQs 5 10 *11)
    [4294671.935000] ACPI: PCI Interrupt Link [C0BE] (IRQs 5 10 *11)
    [4294671.953000] ACPI: PCI Interrupt Link [C0BF] (IRQs 5 10 *11)
    [4294671.971000] ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
    [4294671.989000] ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 11) *0, disabled.
    [4294672.042000] ACPI: Power Resource [C1F3] (off)
    [4294672.046000] ACPI: Power Resource [C1F4] (off)
    [4294672.050000] ACPI: Power Resource [C1F5] (off)
    [4294672.054000] Linux Plug and Play Support v0.97 (c) Adam Belay
    [4294672.054000] pnp: PnP ACPI init
    [4294672.497000] pnp: PnP ACPI: found 15 devices
    [4294672.497000] PnPBIOS: Disabled by ACPI PNP
    [4294672.497000] SCSI subsystem initialized
    [4294672.497000] PCI: Using ACPI for IRQ routing
    [4294672.497000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    [4294672.590000] pnp: 00:0c: ioport range 0x140-0x14f has been reserved
    [4294672.590000] pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
    [4294672.590000] pnp: 00:0d: ioport range 0x1000-0x1087 could not be reserved
    [4294672.590000] pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
    [4294672.590000] pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
    [4294672.591000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [4294672.591000] apm: overridden by ACPI.
    [4294672.592000] inotify device minor=63
    [4294672.592000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    [4294672.592000] devfs: boot_options: 0x0
    [4294672.592000] Initializing Cryptographic API
    [4294672.593000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [4294672.593000] fakephp: Fake PCI Hot Plug Controller Driver
    [4294672.593000] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
    [4294672.608000] ACPI: PCI Interrupt Link [C0BB] enabled at IRQ 11
    [4294672.608000] PCI: setting IRQ 11 as level-triggered
    [4294672.608000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0BB] -> GSI 11 (level, low) -> IRQ 11
    [4294672.805000] radeonfb: Retreived PLL infos from BIOS
    [4294672.805000] radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
    [4294672.805000] radeonfb: PLL min 12000 max 35000
    [4294672.805000] Non-DDC laptop panel detected
    [4294672.836000] radeonfb: Monitor 1 type LCD found
    [4294672.836000] radeonfb: Monitor 2 type no found
    [4294672.836000] radeonfb: panel ID string: 1024x768
    [4294672.836000] radeonfb: detected LVDS panel size from BIOS: 1024x768
    [4294672.836000] radeondb: BIOS provided dividers will be used
    [4294672.978000] radeonfb: Dynamic Clock Power Management enabled
    [4294673.339000] Console: switching to colour frame buffer device 128x48
    [4294673.339000] radeonfb (0000:01:00.0): ATI Radeon LY
    [4294673.345000] ACPI: AC Adapter [C1A2] (on-line)
    [4294674.538000] ACPI: Battery Slot [C19F] (battery present)
    [4294674.544000] ACPI: Battery Slot [C1A0] (battery absent)
    [4294674.544000] ACPI: Power Button (FF) [PWRF]
    [4294674.544000] ACPI: Sleep Button (CM) [C1A3]
    [4294674.544000] ACPI: Lid Switch [C1A4]
    [4294674.548000] ACPI: Fan [C1F6] (off)
    [4294674.552000] ACPI: Fan [C1F7] (off)
    [4294674.556000] ACPI: Fan [C1F8] (off)
    [4294674.561000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    [4294674.905000] ACPI: Thermal Zone [TZ1] (81 C)
    [4294674.936000] Linux agpgart interface v0.101 (c) Dave Jones
    [4294674.937000] agpgart: Detected an Intel 830M Chipset.
    [4294674.952000] agpgart: AGP aperture is 256M @ 0x60000000
    [4294674.952000] [drm] Initialized drm 1.0.0 20040925
    [4294674.952000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0BB] -> GSI 11 (level, low) -> IRQ 11
    [4294674.953000] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon Mobility M6 LY
    [4294674.955000] cn_fork is registered
    [4294674.958000] PNP: PS/2 Controller [PNP0303:C171,PNP0f0e:C172] at 0x60,0x64 irq 1,12
    [4294674.962000] i8042.c: Detected active multiplexing controller, rev 1.1.
    [4294674.966000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [4294674.969000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [4294674.971000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [4294674.974000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [4294674.977000] serio: i8042 KBD port at 0x60,0x64 irq 1
    [4294674.980000] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    [4294674.984000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [4294674.987000] ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
    [4294674.992000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [4294674.996000] io scheduler noop registered
    [4294674.999000] io scheduler anticipatory registered
    [4294675.002000] io scheduler deadline registered
    [4294675.005000] io scheduler cfq registered
    [4294675.008000] e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
    [4294675.012000] e100: Copyright(c) 1999-2005 Intel Corporation
    [4294675.030000] ACPI: PCI Interrupt Link [C0BE] enabled at IRQ 11
    [4294675.033000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [C0BE] -> GSI 11 (level, low) -> IRQ 11
    [4294675.123000] e100: eth0: e100_probe: addr 0x40200000, irq 11, MAC addr 00:02:A5:B5:03:7C
    [4294675.141000] ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 11
    [4294675.144000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [C0BA] -> GSI 11 (level, low) -> IRQ 11
    [4294675.234000] e100: eth1: e100_probe: addr 0x40280000, irq 11, MAC addr 00:02:B3:8D:0D:4B
    [4294675.238000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    [4294675.241000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [4294675.245000] ICH3M: IDE controller at PCI slot 0000:00:1f.1
    [4294675.249000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    [4294675.267000] ACPI: PCI Interrupt Link [C0BC] enabled at IRQ 11
    [4294675.270000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0BC] -> GSI 11 (level, low) -> IRQ 11
    [4294675.274000] ICH3M: chipset revision 1
    [4294675.278000] ICH3M: not 100% native mode: will probe irqs later
    [4294675.282000] ide0: BM-DMA at 0x4060-0x4067, BIOS settings: hda:DMA, hdb:pio
    [4294675.286000] ide1: BM-DMA at 0x4068-0x406f, BIOS settings: hdc:DMA, hdd:pio
    [4294675.291000] Probing IDE interface ide0...
    [4294675.555000] hda: IC25N020ATDA04-0, ATA DISK drive
    [4294676.171000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [4294676.175000] Probing IDE interface ide1...
    [4294676.847000] hdc: Compaq DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
    [4294677.502000] ide1 at 0x170-0x177,0x376 on irq 15
    [4294677.506000] ide2: I/O resource 0x3EE-0x3EE not free.
    [4294677.511000] ide2: ports already in use, skipping probe
    [4294677.515000] Probing IDE interface ide3...
    [4294678.028000] Probing IDE interface ide4...
    [4294678.541000] Probing IDE interface ide5...
    [4294679.054000] hda: max request size: 128KiB
    [4294679.074000] hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
    [4294679.078000] hda: cache flushes not supported
    [4294679.082000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
    [4294679.131000] hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA
    [4294679.135000] Uniform CD-ROM driver Revision: 3.20
    [4294679.144000] mice: PS/2 mouse device common for all mice
    [4294679.148000] NET: Registered protocol family 2
    [4294679.162000] IP: routing cache hash table of 8192 buckets, 64Kbytes
    [4294679.166000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [4294679.174000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    [4294679.180000] TCP: Hash tables configured (established 131072 bind 65536)
    [4294679.184000] TCP reno registered
    [4294679.188000] NET: Registered protocol family 1
    [4294679.192000] NET: Registered protocol family 17
    [4294679.196000] PM: Checking swsusp image.
    [4294679.197000] swsusp: Resume From Partition /dev/hda4
    [4294679.225000] input: AT Translated Set 2 keyboard on isa0060/serio0
    [4294679.231000] swsusp: Suspend partition has wrong signature?
    [4294679.235000] swsusp: Error -22 check for resume file
    [4294679.235000] PM: Resume from disk failed.
    [4294679.235000] ACPI wakeup devices:
    [4294679.240000] C052 C17E C185 C0A4 C0AA C19F C1A0 C1A3 C1A4
    [4294679.245000] ACPI: (supports S0 S1 S3 S4 S4bios S5)
    [4294679.287000] EXT3-fs: mounted filesystem with ordered data mode.
    [4294679.292000] VFS: Mounted root (ext3 filesystem) readonly.
    [4294679.296000] Freeing unused kernel memory: 180k freed
    [4294679.301000] kjournald starting. Commit interval 5 seconds
    [4294685.817000] Adding 665272k swap on /dev/hda4. Priority:-1 extents:1
    [4294686.059000] EXT3 FS on hda2, internal journal
    [4294690.809000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
    [4294703.454000] kjournald starting. Commit interval 5 seconds
    [4294703.458000] EXT3 FS on hda3, internal journal
    [4294703.458000] EXT3-fs: mounted filesystem with ordered data mode.
    [4294706.656000] usbcore: registered new driver usbfs
    [4294706.663000] usbcore: registered new driver hub
    [4294706.759000] USB Universal Host Controller Interface driver v2.3
    [4294706.786000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0BA] -> GSI 11 (level, low) -> IRQ 11
    [4294706.789000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
    [4294706.789000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801CA/CAM USB (Hub #1)
    [4294706.816000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [4294706.820000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004000
    [4294706.827000] hub 1-0:1.0: USB hub found
    [4294706.831000] hub 1-0:1.0: 2 ports detected
    [4294706.852000] ACPI: PCI Interrupt Link [C0BD] enabled at IRQ 11
    [4294706.856000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0BD] -> GSI 11 (level, low) -> IRQ 11
    [4294706.860000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
    [4294706.860000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801CA/CAM USB (Hub #2)
    [4294706.887000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [4294706.891000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004020
    [4294706.899000] hub 2-0:1.0: USB hub found
    [4294706.903000] hub 2-0:1.0: 2 ports detected
    [4294706.929000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0BC] -> GSI 11 (level, low) -> IRQ 11
    [4294706.933000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
    [4294706.933000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801CA/CAM USB (Hub #3)
    [4294706.979000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [4294706.983000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
    [4294706.991000] hub 3-0:1.0: USB hub found
    [4294707.006000] usb 1-2: new full speed USB device using uhci_hcd and address 2
    [4294707.074000] hub 3-0:1.0: 2 ports detected
    [4294707.099000] hub 1-2:1.0: USB hub found
    [4294707.105000] hub 1-2:1.0: 4 ports detected
    [4294710.762000] hw_random hardware driver 1.0.0 loaded
    [4294711.284000] ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
    [4294711.288000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [C0C0] -> GSI 11 (level, low) -> IRQ 11
    [4294711.292000] Yenta: CardBus bridge found at 0000:02:03.0 [0e11:004e]
    [4294711.296000] Yenta: Enabling burst memory read transactions
    [4294711.300000] Yenta: Using CSCINT to route CSC interrupts to PCI
    [4294711.304000] Yenta: Routing CardBus interrupts to PCI
    [4294711.307000] Yenta TI: socket 0000:02:03.0, mfunc 0x01001002, devctl 0x64
    [4294711.532000] Yenta: ISA IRQ mask 0x04f8, PCI irq 11
    [4294711.536000] Socket status: 30000006
    [4294711.540000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
    [4294711.544000] cs: IO port probe 0x2000-0x2fff: clean.
    [4294711.548000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x403fffff
    [4294711.576000] ACPI: PCI Interrupt 0000:02:03.1[A] -> Link [C0C0] -> GSI 11 (level, low) -> IRQ 11
    [4294711.580000] Yenta: CardBus bridge found at 0000:02:03.1 [0e11:004e]
    [4294711.584000] Yenta: Using CSCINT to route CSC interrupts to PCI
    [4294711.589000] Yenta: Routing CardBus interrupts to PCI
    [4294711.593000] Yenta TI: socket 0000:02:03.1, mfunc 0x01001002, devctl 0x64
    [4294711.818000] Yenta: ISA IRQ mask 0x04f8, PCI irq 11
    [4294711.822000] Socket status: 30000006
    [4294711.826000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
    [4294711.830000] cs: IO port probe 0x2000-0x2fff: clean.
    [4294711.835000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x403fffff
    [4294712.735000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [C0BA] -> GSI 11 (level, low) -> IRQ 11
    [4294716.336000] parport: PnPBIOS parport detected.
    [4294716.340000] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
    [4294716.532000] input: PC Speaker
    [4294716.747000] Real Time Clock Driver v1.12
    [4294717.266000] input: ImPS/2 Logitech Wheel Mouse on isa0060/serio2
    [4294717.877000] bic unavailable using TCP reno
    [4294718.028000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x884793/0x0
    [4294718.032000] serio: Synaptics pass-through port at isa0060/serio4/input0
    [4294718.039000] input: SynPS/2 Synaptics TouchPad on isa0060/serio4
    [4294723.103000] input: PS/2 Generic Mouse on synaptics-pt/serio0
    [4294725.979000] bic unavailable using TCP reno
    [4294727.205000] e100: dock: e100_watchdog: link up, 100Mbps, full-duplex
    [4294731.867000] bic unavailable using TCP reno
    [4294731.886000] bic unavailable using TCP reno
    [4294731.905000] bic unavailable using TCP reno
    [4294733.127000] cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
    [4294733.133000] cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
    [4294733.140000] cs: IO port probe 0x800-0x8ff: clean.
    [4294733.229000] cs: IO port probe 0x800-0x8ff: clean.
    [4294733.235000] cs: IO port probe 0xc00-0xcff: clean.
    [4294733.239000] cs: IO port probe 0xc00-0xcff: clean.
    [4294733.244000] cs: IO port probe 0xa00-0xaff: clean.
    [4294733.248000] cs: IO port probe 0xa00-0xaff: clean.
    [4294733.865000] bic unavailable using TCP reno
    [4294739.446000] bic unavailable using TCP reno
    [4294739.481000] bic unavailable using TCP reno
    [4294739.814000] bic unavailable using TCP reno
    [4294741.056000] bic unavailable using TCP reno
    [4294742.193000] bic unavailable using TCP reno
    [4294747.682000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    [4294747.683000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    [4294747.683000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
    [4294767.872000] bic unavailable using TCP reno
    [4294780.618000] bic unavailable using TCP reno
    [4294780.627000] bic unavailable using TCP reno
    [4294790.365000] bic unavailable using TCP reno
    [4294790.374000] bic unavailable using TCP reno
    [4294795.806000] bic unavailable using TCP reno
    [4294795.815000] bic unavailable using TCP reno
    [4294796.040000] bic unavailable using TCP reno
    [4294796.049000] bic unavailable using TCP reno
    [4294806.580000] bic unavailable using TCP reno
    [4294806.888000] bic unavailable using TCP reno
    [4294806.898000] bic unavailable using TCP reno
    [4294806.907000] bic unavailable using TCP reno
    [4294836.920000] bic unavailable using TCP reno
    [4294866.926000] bic unavailable using TCP reno
    [4294896.930000] bic unavailable using TCP reno
    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.12-rc5-mm2
    # Mon Jun 20 14:40:17 2005
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    # CONFIG_CLEAN_COMPILE is not set
    CONFIG_BROKEN=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32

    #
    # General setup
    #
    CONFIG_LOCALVERSION="=LoulousMobile"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    # CONFIG_POSIX_MQUEUE is not set
    CONFIG_BSD_PROCESS_ACCT=y
    # CONFIG_BSD_PROCESS_ACCT_V3 is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_HOTPLUG=y
    CONFIG_KOBJECT_UEVENT=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    CONFIG_KALLSYMS_ALL=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SHMEM=y
    CONFIG_CC_ALIGN_FUNCTIONS=0
    CONFIG_CC_ALIGN_LABELS=0
    CONFIG_CC_ALIGN_LOOPS=0
    CONFIG_CC_ALIGN_JUMPS=0
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    CONFIG_MPENTIUMIII=y
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=5
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_HPET_TIMER=y
    # CONFIG_SMP is not set
    # CONFIG_PREEMPT_NONE is not set
    # CONFIG_PREEMPT_VOLUNTARY is not set
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_BKL=y
    CONFIG_X86_UP_APIC=y
    CONFIG_X86_UP_IOAPIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=m
    CONFIG_X86_MCE_P4THERMAL=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_X86_REBOOTFIXUPS is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_HAVE_DEC_LOCK=y
    # CONFIG_REGPARM is not set
    CONFIG_SECCOMP=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    CONFIG_HZ_1000=y
    CONFIG_HZ=1000

    #
    # Performance-monitoring counters support
    #
    # CONFIG_PERFCTR is not set
    CONFIG_PHYSICAL_START=0x100000
    CONFIG_KEXEC=y

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    CONFIG_SOFTWARE_SUSPEND=y
    CONFIG_PM_STD_PARTITION="/dev/hda4"

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    CONFIG_ACPI_AC=y
    CONFIG_ACPI_BATTERY=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_IBM is not set
    # CONFIG_ACPI_TOSHIBA is not set
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    CONFIG_ACPI_DEBUG=y
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=m

    #
    # APM (Advanced Power Management) BIOS Support
    #
    CONFIG_APM=y
    # CONFIG_APM_IGNORE_USER_SUSPEND is not set
    # CONFIG_APM_DO_ENABLE is not set
    # CONFIG_APM_CPU_IDLE is not set
    # CONFIG_APM_DISPLAY_BLANK is not set
    # CONFIG_APM_RTC_IS_GMT is not set
    # CONFIG_APM_ALLOW_INTS is not set
    # CONFIG_APM_REAL_MODE_POWER_OFF is not set

    #
    # CPU Frequency scaling
    #
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=y
    # CONFIG_CPU_FREQ_DEBUG is not set
    CONFIG_CPU_FREQ_STAT=y
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=y
    CONFIG_CPU_FREQ_GOV_USERSPACE=y
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

    #
    # CPUFreq processor drivers
    #
    # CONFIG_X86_ACPI_CPUFREQ is not set
    # CONFIG_X86_POWERNOW_K6 is not set
    # CONFIG_X86_POWERNOW_K7 is not set
    # CONFIG_X86_POWERNOW_K8 is not set
    # CONFIG_X86_GX_SUSPMOD is not set
    CONFIG_X86_SPEEDSTEP_CENTRINO=y
    # CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
    CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
    CONFIG_X86_SPEEDSTEP_ICH=y
    # CONFIG_X86_SPEEDSTEP_SMI is not set
    # CONFIG_X86_P4_CLOCKMOD is not set
    # CONFIG_X86_CPUFREQ_NFORCE2 is not set
    # CONFIG_X86_LONGRUN is not set
    # CONFIG_X86_LONGHAUL is not set

    #
    # shared options
    #
    CONFIG_X86_SPEEDSTEP_LIB=y
    # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCIEPORTBUS is not set
    # CONFIG_PCI_MSI is not set
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_ISA_DMA_API=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set

    #
    # PCCARD (PCMCIA/CardBus) support
    #
    CONFIG_PCCARD=m
    # CONFIG_PCMCIA_DEBUG is not set
    CONFIG_PCMCIA=m
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_PCMCIA_IOCTL=y
    CONFIG_CARDBUS=y

    #
    # PC-card bridges
    #
    CONFIG_YENTA=m
    # CONFIG_PD6729 is not set
    # CONFIG_I82092 is not set
    # CONFIG_I82365 is not set
    # CONFIG_TCIC is not set
    CONFIG_PCMCIA_PROBE=y
    CONFIG_PCCARD_NONSTATIC=m

    #
    # PCI Hotplug Support
    #
    CONFIG_HOTPLUG_PCI=y
    CONFIG_HOTPLUG_PCI_FAKE=y
    CONFIG_HOTPLUG_PCI_COMPAQ=y
    CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
    # CONFIG_HOTPLUG_PCI_IBM is not set
    # CONFIG_HOTPLUG_PCI_ACPI is not set
    # CONFIG_HOTPLUG_PCI_CPCI is not set
    # CONFIG_HOTPLUG_PCI_SHPC is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    # CONFIG_STANDALONE is not set
    # CONFIG_PREVENT_FIRMWARE_BUILD is not set
    CONFIG_FW_LOADER=y
    # CONFIG_DEBUG_DRIVER is not set

    #
    # Connector - unified userspace <-> kernelspace linker
    #
    CONFIG_CONNECTOR=y
    CONFIG_FORK_CONNECTOR=y

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    # CONFIG_PARPORT_SERIAL is not set
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_PC_PCMCIA is not set
    # CONFIG_PARPORT_GSC is not set
    # CONFIG_PARPORT_1284 is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    # CONFIG_ISAPNP is not set
    CONFIG_PNPBIOS=y
    CONFIG_PNPBIOS_PROC_FS=y
    CONFIG_PNPACPI=y

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_XD is not set
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=m
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    # CONFIG_BLK_DEV_RAM is not set
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_INITRAMFS_SOURCE=""
    # CONFIG_LBD is not set
    # CONFIG_CDROM_PKTCDVD is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_ATA_OVER_ETH is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    # CONFIG_BLK_DEV_IDECS is not set
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    # CONFIG_IDE_TASK_IOCTL is not set

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=y
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    CONFIG_BLK_DEV_PIIX=y
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_ARM is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=m
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=m
    # CONFIG_CHR_DEV_SCH is not set

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI Transport Attributes
    #
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_ARCMSR is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_MEGARAID_SAS is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_CPQFCTS is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=y
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_LPFC is not set
    # CONFIG_SCSI_SEAGATE is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # PCMCIA SCSI adapter support
    #
    # CONFIG_PCMCIA_AHA152X is not set
    # CONFIG_PCMCIA_FDOMAIN is not set
    # CONFIG_PCMCIA_NINJA_SCSI is not set
    # CONFIG_PCMCIA_QLOGIC is not set
    # CONFIG_PCMCIA_SYM53C500 is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Multi-device support (RAID and LVM)
    #
    CONFIG_MD=y
    # CONFIG_BLK_DEV_MD is not set
    CONFIG_BLK_DEV_DM=m
    # CONFIG_DM_CRYPT is not set
    # CONFIG_DM_SNAPSHOT is not set
    # CONFIG_DM_MIRROR is not set
    # CONFIG_DM_ZERO is not set
    # CONFIG_DM_MULTIPATH is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set
    # CONFIG_FUSION_SPI is not set
    # CONFIG_FUSION_FC is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    # CONFIG_IP_MULTIPLE_TABLES is not set
    # CONFIG_IP_ROUTE_MULTIPATH is not set
    # CONFIG_IP_ROUTE_VERBOSE is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_TUNNEL is not set
    CONFIG_IP_TCPDIAG=y
    # CONFIG_IP_TCPDIAG_IPV6 is not set

    #
    # TCP congestion control
    #
    # CONFIG_TCP_CONG_BIC is not set
    # CONFIG_TCP_CONG_WESTWOOD is not set
    # CONFIG_TCP_CONG_HTCP is not set
    # CONFIG_TCP_CONG_HSTCP is not set
    # CONFIG_TCP_CONG_HYBLA is not set
    # CONFIG_TCP_CONG_VEGAS is not set

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    # CONFIG_IPV6 is not set
    CONFIG_NETFILTER=y
    CONFIG_NETFILTER_DEBUG=y

    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=m
    # CONFIG_IP_NF_CT_ACCT is not set
    # CONFIG_IP_NF_CONNTRACK_MARK is not set
    # CONFIG_IP_NF_CT_PROTO_SCTP is not set
    # CONFIG_IP_NF_FTP is not set
    # CONFIG_IP_NF_IRC is not set
    # CONFIG_IP_NF_TFTP is not set
    # CONFIG_IP_NF_AMANDA is not set
    # CONFIG_IP_NF_QUEUE is not set
    CONFIG_IP_NF_IPTABLES=m
    # CONFIG_IP_NF_MATCH_LIMIT is not set
    # CONFIG_IP_NF_MATCH_IPRANGE is not set
    # CONFIG_IP_NF_MATCH_MAC is not set
    # CONFIG_IP_NF_MATCH_PKTTYPE is not set
    # CONFIG_IP_NF_MATCH_MARK is not set
    # CONFIG_IP_NF_MATCH_MULTIPORT is not set
    # CONFIG_IP_NF_MATCH_TOS is not set
    # CONFIG_IP_NF_MATCH_RECENT is not set
    # CONFIG_IP_NF_MATCH_ECN is not set
    # CONFIG_IP_NF_MATCH_DSCP is not set
    # CONFIG_IP_NF_MATCH_AH_ESP is not set
    # CONFIG_IP_NF_MATCH_LENGTH is not set
    # CONFIG_IP_NF_MATCH_TTL is not set
    # CONFIG_IP_NF_MATCH_TCPMSS is not set
    # CONFIG_IP_NF_MATCH_HELPER is not set
    CONFIG_IP_NF_MATCH_STATE=m
    CONFIG_IP_NF_MATCH_CONNTRACK=m
    # CONFIG_IP_NF_MATCH_OWNER is not set
    # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
    # CONFIG_IP_NF_MATCH_REALM is not set
    # CONFIG_IP_NF_MATCH_SCTP is not set
    # CONFIG_IP_NF_MATCH_COMMENT is not set
    # CONFIG_IP_NF_MATCH_HASHLIMIT is not set
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    # CONFIG_IP_NF_TARGET_ULOG is not set
    # CONFIG_IP_NF_TARGET_TCPMSS is not set
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    # CONFIG_IP_NF_TARGET_REDIRECT is not set
    # CONFIG_IP_NF_TARGET_NETMAP is not set
    # CONFIG_IP_NF_TARGET_SAME is not set
    # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
    # CONFIG_IP_NF_MANGLE is not set
    # CONFIG_IP_NF_RAW is not set
    # CONFIG_IP_NF_ARPTABLES is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    CONFIG_IP_SCTP=m
    CONFIG_SCTP_DBG_MSG=y
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    # CONFIG_SCTP_HMAC_SHA1 is not set
    CONFIG_SCTP_HMAC_MD5=y
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set
    # CONFIG_NET_CLS_ROUTE is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_KGDBOE is not set
    CONFIG_NETPOLL=y
    # CONFIG_NETPOLL_RX is not set
    # CONFIG_NETPOLL_TRAP is not set
    CONFIG_NET_POLL_CONTROLLER=y
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_IEEE80211=m
    # CONFIG_IEEE80211_DEBUG is not set
    CONFIG_IEEE80211_CRYPT_WEP=m
    CONFIG_IEEE80211_CRYPT_CCMP=m
    CONFIG_IEEE80211_CRYPT_TKIP=m
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    CONFIG_TUN=m
    # CONFIG_NET_SB1000 is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_AC3200 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    CONFIG_E100=y
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_NET_POCKET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SKGE is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set
    # CONFIG_BNX2 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_CHELSIO_T1 is not set
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    CONFIG_NET_RADIO=y

    #
    # Obsolete Wireless cards support (pre-802.11)
    #
    # CONFIG_STRIP is not set
    # CONFIG_ARLAN is not set
    # CONFIG_WAVELAN is not set
    # CONFIG_PCMCIA_WAVELAN is not set
    # CONFIG_PCMCIA_NETWAVE is not set

    #
    # Wireless 802.11 Frequency Hopping cards support
    #
    # CONFIG_PCMCIA_RAYCS is not set

    #
    # Wireless 802.11b ISA/PCI cards support
    #
    # CONFIG_IPW2100 is not set
    # CONFIG_IPW2200 is not set
    # CONFIG_AIRO is not set
    CONFIG_HERMES=m
    # CONFIG_PLX_HERMES is not set
    # CONFIG_TMD_HERMES is not set
    # CONFIG_PCI_HERMES is not set
    # CONFIG_ATMEL is not set

    #
    # Wireless 802.11b Pcmcia/Cardbus cards support
    #
    CONFIG_PCMCIA_HERMES=m
    # CONFIG_AIRO_CS is not set
    # CONFIG_PCMCIA_WL3501 is not set

    #
    # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
    #
    # CONFIG_PRISM54 is not set
    CONFIG_HOSTAP=m
    CONFIG_HOSTAP_WEP=m
    CONFIG_HOSTAP_TKIP=m
    CONFIG_HOSTAP_CCMP=m
    CONFIG_HOSTAP_FIRMWARE=y
    CONFIG_HOSTAP_PLX=m
    CONFIG_HOSTAP_PCI=m
    CONFIG_HOSTAP_CS=m
    CONFIG_NET_WIRELESS=y

    #
    # PCMCIA network device support
    #
    CONFIG_NET_PCMCIA=y
    # CONFIG_PCMCIA_3C589 is not set
    # CONFIG_PCMCIA_3C574 is not set
    # CONFIG_PCMCIA_FMVJ18X is not set
    # CONFIG_PCMCIA_PCNET is not set
    # CONFIG_PCMCIA_NMCLAN is not set
    # CONFIG_PCMCIA_SMC91C92 is not set
    # CONFIG_PCMCIA_XIRC2PS is not set
    # CONFIG_PCMCIA_AXNET is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    CONFIG_PLIP=m
    CONFIG_PPP=m
    # CONFIG_PPP_MULTILINK is not set
    # CONFIG_PPP_FILTER is not set
    CONFIG_PPP_ASYNC=m
    # CONFIG_PPP_SYNC_TTY is not set
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPP_MPPE=m
    # CONFIG_PPPOE is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    CONFIG_NETCONSOLE=m

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=m
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=m
    # CONFIG_INPUT_UINPUT is not set

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_GAMEPORT is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    # CONFIG_SERIAL_8250_CONSOLE is not set
    # CONFIG_SERIAL_8250_CS is not set
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    # CONFIG_TIPAR is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=m
    # CONFIG_NVRAM is not set
    CONFIG_RTC=m
    CONFIG_GEN_RTC=m
    CONFIG_GEN_RTC_X=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    CONFIG_AGP_INTEL=y
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_GAMMA is not set
    # CONFIG_DRM_R128 is not set
    CONFIG_DRM_RADEON=y
    # CONFIG_DRM_I810 is not set
    # CONFIG_DRM_I830 is not set
    # CONFIG_DRM_I915 is not set
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set
    # CONFIG_DRM_VIA is not set

    #
    # PCMCIA character devices
    #
    # CONFIG_SYNCLINK_CS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # TPM devices
    #
    # CONFIG_TCG_TPM is not set

    #
    # I2C support
    #
    # CONFIG_I2C is not set

    #
    # Dallas's 1-wire bus
    #
    # CONFIG_W1 is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set

    #
    # Multimedia devices
    #
    CONFIG_VIDEO_DEV=m

    #
    # Video For Linux
    #

    #
    # Video Adapters
    #
    # CONFIG_VIDEO_PMS is not set
    # CONFIG_VIDEO_BWQCAM is not set
    # CONFIG_VIDEO_CQCAM is not set
    # CONFIG_VIDEO_CPIA is not set
    # CONFIG_VIDEO_STRADIS is not set
    # CONFIG_VIDEO_MXB is not set
    # CONFIG_VIDEO_DPC is not set
    # CONFIG_VIDEO_HEXIUM_ORION is not set
    # CONFIG_VIDEO_HEXIUM_GEMINI is not set

    #
    # Radio Adapters
    #
    # CONFIG_RADIO_CADET is not set
    # CONFIG_RADIO_RTRACK is not set
    # CONFIG_RADIO_RTRACK2 is not set
    # CONFIG_RADIO_AZTECH is not set
    # CONFIG_RADIO_GEMTEK is not set
    # CONFIG_RADIO_GEMTEK_PCI is not set
    # CONFIG_RADIO_MAXIRADIO is not set
    # CONFIG_RADIO_MAESTRO is not set
    # CONFIG_RADIO_SF16FMI is not set
    # CONFIG_RADIO_SF16FMR2 is not set
    # CONFIG_RADIO_TERRATEC is not set
    # CONFIG_RADIO_TRUST is not set
    # CONFIG_RADIO_TYPHOON is not set
    # CONFIG_RADIO_ZOLTRIX is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # Graphics support
    #
    CONFIG_FB=y
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    CONFIG_FB_SOFT_CURSOR=y
    # CONFIG_FB_MACMODES is not set
    CONFIG_FB_MODE_HELPERS=y
    # CONFIG_FB_TILEBLITTING is not set
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    # CONFIG_FB_VESA is not set
    CONFIG_VIDEO_SELECT=y
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_I810 is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON_OLD is not set
    CONFIG_FB_RADEON=y
    # CONFIG_FB_RADEON_I2C is not set
    # CONFIG_FB_RADEON_DEBUG is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y

    #
    # Logo configuration
    #
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y
    # CONFIG_BACKLIGHT_LCD_SUPPORT is not set

    #
    # Sound
    #
    CONFIG_SOUND=m

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=m
    CONFIG_SND_TIMER=m
    CONFIG_SND_PCM=m
    CONFIG_SND_SEQUENCER=m
    CONFIG_SND_SEQ_DUMMY=m
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_SEQUENCER_OSS=y
    # CONFIG_SND_RTCTIMER is not set
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # ISA devices
    #
    # CONFIG_SND_AD1848 is not set
    # CONFIG_SND_CS4231 is not set
    # CONFIG_SND_CS4232 is not set
    # CONFIG_SND_CS4236 is not set
    # CONFIG_SND_ES1688 is not set
    # CONFIG_SND_ES18XX is not set
    # CONFIG_SND_GUSCLASSIC is not set
    # CONFIG_SND_GUSEXTREME is not set
    # CONFIG_SND_GUSMAX is not set
    # CONFIG_SND_INTERWAVE is not set
    # CONFIG_SND_INTERWAVE_STB is not set
    # CONFIG_SND_OPTI92X_AD1848 is not set
    # CONFIG_SND_OPTI92X_CS4231 is not set
    # CONFIG_SND_OPTI93X is not set
    # CONFIG_SND_SB8 is not set
    # CONFIG_SND_SB16 is not set
    # CONFIG_SND_SBAWE is not set
    # CONFIG_SND_WAVEFRONT is not set
    # CONFIG_SND_CMI8330 is not set
    # CONFIG_SND_OPL3SA2 is not set
    # CONFIG_SND_SGALAXY is not set
    # CONFIG_SND_SSCAPE is not set

    #
    # PCI devices
    #
    CONFIG_SND_AC97_CODEC=m
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    CONFIG_SND_MAESTRO3=m
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_HDA_INTEL is not set

    #
    # USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set

    #
    # PCMCIA devices
    #
    # CONFIG_SND_VXPOCKET is not set
    # CONFIG_SND_VXP440 is not set
    # CONFIG_SND_PDAUDIOCF is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # USB support
    #
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    # CONFIG_USB_DYNAMIC_MINORS is not set
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    # CONFIG_USB_EHCI_HCD is not set
    # CONFIG_USB_ISP116X_HCD is not set
    # CONFIG_USB_OHCI_HCD is not set
    CONFIG_USB_UHCI_HCD=m
    # CONFIG_USB_SL811_HCD is not set

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_AUDIO is not set
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_MIDI is not set
    # CONFIG_USB_ACM is not set
    # CONFIG_USB_PRINTER is not set

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
    #
    CONFIG_USB_STORAGE=m
    # CONFIG_USB_STORAGE_DEBUG is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_ISD200 is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_USBAT is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT=y
    # CONFIG_HID_FF is not set
    CONFIG_USB_HIDDEV=y

    #
    # USB HID Boot Protocol drivers
    #
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_MTOUCH is not set
    # CONFIG_USB_ITMTOUCH is not set
    # CONFIG_USB_EGALAX is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set

    #
    # USB Multimedia devices
    #
    # CONFIG_USB_DABUSB is not set
    # CONFIG_USB_VICAM is not set
    # CONFIG_USB_DSBR is not set
    # CONFIG_USB_IBMCAM is not set
    # CONFIG_USB_KONICAWC is not set
    # CONFIG_USB_OV511 is not set
    # CONFIG_USB_SE401 is not set
    # CONFIG_USB_SN9C102 is not set
    # CONFIG_USB_STV680 is not set
    # CONFIG_USB_PWC is not set

    #
    # USB Network Adapters
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set
    # CONFIG_USB_ZD1201 is not set
    CONFIG_USB_MON=m

    #
    # USB port drivers
    #
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    CONFIG_USB_SERIAL=m
    # CONFIG_USB_SERIAL_GENERIC is not set
    # CONFIG_USB_SERIAL_AIRPRIME is not set
    # CONFIG_USB_SERIAL_BELKIN is not set
    # CONFIG_USB_SERIAL_WHITEHEAT is not set
    # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
    # CONFIG_USB_SERIAL_CP2101 is not set
    # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
    # CONFIG_USB_SERIAL_EMPEG is not set
    # CONFIG_USB_SERIAL_FTDI_SIO is not set
    CONFIG_USB_SERIAL_VISOR=m
    # CONFIG_USB_SERIAL_IPAQ is not set
    # CONFIG_USB_SERIAL_IR is not set
    # CONFIG_USB_SERIAL_EDGEPORT is not set
    # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
    # CONFIG_USB_SERIAL_GARMIN is not set
    # CONFIG_USB_SERIAL_IPW is not set
    # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
    # CONFIG_USB_SERIAL_KEYSPAN is not set
    # CONFIG_USB_SERIAL_KLSI is not set
    # CONFIG_USB_SERIAL_KOBIL_SCT is not set
    # CONFIG_USB_SERIAL_MCT_U232 is not set
    # CONFIG_USB_SERIAL_PL2303 is not set
    # CONFIG_USB_SERIAL_HP4X is not set
    # CONFIG_USB_SERIAL_SAFE is not set
    # CONFIG_USB_SERIAL_TI is not set
    # CONFIG_USB_SERIAL_CYBERJACK is not set
    # CONFIG_USB_SERIAL_XIRCOM is not set
    # CONFIG_USB_SERIAL_OMNINET is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGETKIT is not set
    # CONFIG_USB_PHIDGETSERVO is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_TEST is not set

    #
    # USB DSL modem support
    #

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # MMC/SD Card support
    #
    # CONFIG_MMC is not set

    #
    # InfiniBand support
    #
    # CONFIG_INFINIBAND is not set

    #
    # SN Devices
    #

    #
    # Distributed Lock Manager
    #
    CONFIG_DLM=m
    CONFIG_DLM_DEVICE=m
    # CONFIG_DLM_DEBUG is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    CONFIG_EXT2_FS_XIP=y
    CONFIG_FS_XIP=y
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    CONFIG_REISERFS_FS=m
    # CONFIG_REISERFS_CHECK is not set
    CONFIG_REISERFS_PROC_INFO=y
    CONFIG_REISERFS_FS_XATTR=y
    CONFIG_REISERFS_FS_POSIX_ACL=y
    # CONFIG_REISERFS_FS_SECURITY is not set
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y

    #
    # XFS support
    #
    # CONFIG_XFS_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    CONFIG_AUTOFS_FS=m
    CONFIG_AUTOFS4_FS=m

    #
    # Caches
    #
    CONFIG_FSCACHE=m
    CONFIG_CACHEFS=m
    # CONFIG_FUSE_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=m
    CONFIG_UDF_FS=m
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=850
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
    # CONFIG_NTFS_FS is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    CONFIG_DEVFS_FS=y
    # CONFIG_DEVFS_MOUNT is not set
    # CONFIG_DEVFS_DEBUG is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    CONFIG_TMPFS_XATTR=y
    CONFIG_TMPFS_SECURITY=y
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    CONFIG_CONFIGFS_FS=m
    CONFIG_RELAYFS_FS=m

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=m
    CONFIG_NFS_V3=y
    CONFIG_NFS_V3_ACL=y
    # CONFIG_NFS_V4 is not set
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=m
    CONFIG_NFSD_V2_ACL=y
    CONFIG_NFSD_V3=y
    CONFIG_NFSD_V3_ACL=y
    # CONFIG_NFSD_V4 is not set
    # CONFIG_NFSD_TCP is not set
    CONFIG_LOCKD=m
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=m
    CONFIG_NFS_ACL_SUPPORT=m
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=m
    # CONFIG_RPCSEC_GSS_KRB5 is not set
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    CONFIG_SMB_FS=m
    CONFIG_SMB_NLS_DEFAULT=y
    CONFIG_SMB_NLS_REMOTE="cp850"
    CONFIG_CIFS=m
    CONFIG_CIFS_STATS=y
    CONFIG_CIFS_XATTR=y
    CONFIG_CIFS_POSIX=y
    # CONFIG_CIFS_EXPERIMENTAL is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=m
    CONFIG_NLS_DEFAULT="iso8859-15"
    CONFIG_NLS_CODEPAGE_437=m
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    CONFIG_NLS_CODEPAGE_850=m
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    # CONFIG_NLS_ASCII is not set
    CONFIG_NLS_ISO8859_1=m
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=m
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=m

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    CONFIG_PRINTK_TIME=y
    CONFIG_DEBUG_KERNEL=y
    CONFIG_MAGIC_SYSRQ=y
    CONFIG_LOG_BUF_SHIFT=17
    CONFIG_DETECT_SOFTLOCKUP=y
    CONFIG_SCHEDSTATS=y
    # CONFIG_DEBUG_SLAB is not set
    CONFIG_DEBUG_PREEMPT=y
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_DEBUG_KOBJECT is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_DEBUG_INFO is not set
    CONFIG_PAGE_OWNER=y
    CONFIG_DEBUG_FS=y
    # CONFIG_FRAME_POINTER is not set
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_STACKOVERFLOW is not set
    # CONFIG_KPROBES is not set
    # CONFIG_DEBUG_STACK_USAGE is not set

    #
    # Page alloc debug is incompatible with Software Suspend on i386
    #
    CONFIG_4KSTACKS=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    # CONFIG_KGDB is not set

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    # CONFIG_CRYPTO_NULL is not set
    # CONFIG_CRYPTO_MD4 is not set
    CONFIG_CRYPTO_MD5=m
    CONFIG_CRYPTO_SHA1=m
    # CONFIG_CRYPTO_SHA256 is not set
    # CONFIG_CRYPTO_SHA512 is not set
    # CONFIG_CRYPTO_WP512 is not set
    # CONFIG_CRYPTO_TGR192 is not set
    # CONFIG_CRYPTO_DES is not set
    # CONFIG_CRYPTO_BLOWFISH is not set
    # CONFIG_CRYPTO_TWOFISH is not set
    # CONFIG_CRYPTO_SERPENT is not set
    CONFIG_CRYPTO_AES=m
    # CONFIG_CRYPTO_AES_586 is not set
    # CONFIG_CRYPTO_CAST5 is not set
    # CONFIG_CRYPTO_CAST6 is not set
    # CONFIG_CRYPTO_TEA is not set
    CONFIG_CRYPTO_ARC4=m
    # CONFIG_CRYPTO_KHAZAD is not set
    # CONFIG_CRYPTO_ANUBIS is not set
    # CONFIG_CRYPTO_DEFLATE is not set
    CONFIG_CRYPTO_MICHAEL_MIC=m
    # CONFIG_CRYPTO_CRC32C is not set
    # CONFIG_CRYPTO_TEST is not set

    #
    # Hardware crypto devices
    #
    # CONFIG_CRYPTO_DEV_PADLOCK is not set

    #
    # Library routines
    #
    CONFIG_CRC_CCITT=m
    CONFIG_CRC32=y
    # CONFIG_LIBCRC32C is not set
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_PC=y
    \
     
     \ /
      Last update: 2005-06-20 15:19    [W:0.431 / U:3.672 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site