lkml.org 
[lkml]   [2005]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 3c509 module and 2.6 kernel: not all NICs are recognized?
Brian Gerst wrote:
> Michael Tokarev wrote:
[]
>>> It have 4 3c509 cards, one EISA and 3 ISA. Here's the dmesg
[]
>> All the ISA cards are in EISA mode (set in 3c5x9cfg.exe utility).
>> IRQs are assigned by the EISA bus (set by EISA configuration utility).
>> If any of the ISA cards are in non-EISA mode, the some of them
>> does not work at all, starting from EISA BIOS config during boot.
>> So I can't switch the cards into PNP mode.
[]
>
> what does dmesg|grep EISA show?

Looks like I already found it by looking at the driver source.

struct eisa_device_id el3_eisa_ids[] = {
{ "TCM5092" },
{ "TCM5093" },
{ "TCM5095" }, <==== I added this line
{ "" }
};

and now it works.

EISA: Probing bus 0 at 0000:00:06.0
EISA: Mainboard ACR1C01 detected.
EISA: slot 2 : TCM5095 detected.
EISA: slot 3 : TCM5095 detected.
EISA: slot 4 : TCM5095 detected.
EISA: slot 5 : TCM5093 detected.
EISA: Detected 4 cards.


I'm not sure if it will work with ISA cards in ISA mode.
As I pointed out above, this machine does not want to
initialize EISA bus if at least one of the cards isn't
in EISA mode. Will "plain" (in ISA mode) 3c509 be shown
in EISA scan too?

/mjt
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-05-06 23:45    [W:0.043 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site