lkml.org 
[lkml]   [2005]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks
Hi Grant,

Those are the sysfs names? If so something looks wrong with the
SENSOR_ ones..maybe an unintended effect of the new
sensor_device_attribute macro. I can't seem to find anything like that
in "gcc -I ../../../include/ -E adm1026.c" though, would you mind
sending me your script? Also make sure you are including the new
i2c-sysfs.h header file.

The group of attributes you've highlighted below don't use
sensor_device_attribute on purpose because they don't benefit from the
dynamic sysfs callbacks, mainly because they are singletons. Well its
possible you could roll all the attribute callbacks into one if you
wanted but that seems a bit extreme, and you'd have a large nasty
if-else going on in it :-).

BTW looks like a useful script :-), I'm always worried when doing
these changes I might accidently change a sysfs attribute permission.

Thanks,
Yani

On 5/17/05, Grant Coady <grant_lkml@dodo.com.au> wrote:
> Hi Yani,
> On Tue, 17 May 2005 07:18:51 -0400, Yani Ioannou <yani.ioannou@gmail.com> wrote:
>
> Following is derived from gcc -E adm1026.c with your patch (the
> script strips all but base number from numbered names):
>
> adm1026.c SENSOR_fan1_div RW
> adm1026.c SENSOR_fan1_input R
> adm1026.c SENSOR_fan1_min RW
> adm1026.c SENSOR_in0_input R
> adm1026.c SENSOR_in0_max RW
> adm1026.c SENSOR_in0_min RW
> adm1026.c SENSOR_temp1_auto_point1_temp RW
> adm1026.c SENSOR_temp1_auto_point1_temp_hyst R
> adm1026.c SENSOR_temp1_crit RW
> adm1026.c SENSOR_temp1_input R
> adm1026.c SENSOR_temp1_max RW
> adm1026.c SENSOR_temp1_min RW
> adm1026.c SENSOR_temp1_offset RW
> adm1026.c alarm_mask RW
> adm1026.c alarms R
> adm1026.c analog_out RW
> adm1026.c gpio RW
> adm1026.c gpio_mask RW
> adm1026.c pwm1 RW << these also should also
> adm1026.c pwm1_enable RW << have SENSOR_ in front
> adm1026.c temp1_auto_point1_pwm RW << of them, seems you
> adm1026.c temp1_crit_enable RW << missed a group?
> adm1026.c vid R
> adm1026.c vrm RW
>
> I'm assuming some magic elsewhere sees that 'SENSOR_' and removes
> it before it gets to sysfs. I can test adm9240, w83627hf and it87
> drivers as well as watch the overall patterns as above.
>
> --Grant.
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-05-17 23:00    [W:0.109 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site