lkml.org 
[lkml]   [2005]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [lm-sensors] [PATCH 2.6.12-rc4 15/15] drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks
Date
Hi Yani,
On Tue, 17 May 2005 07:18:51 -0400, Yani Ioannou <yani.ioannou@gmail.com> wrote:

Following is derived from gcc -E adm1026.c with your patch (the
script strips all but base number from numbered names):

adm1026.c SENSOR_fan1_div RW
adm1026.c SENSOR_fan1_input R
adm1026.c SENSOR_fan1_min RW
adm1026.c SENSOR_in0_input R
adm1026.c SENSOR_in0_max RW
adm1026.c SENSOR_in0_min RW
adm1026.c SENSOR_temp1_auto_point1_temp RW
adm1026.c SENSOR_temp1_auto_point1_temp_hyst R
adm1026.c SENSOR_temp1_crit RW
adm1026.c SENSOR_temp1_input R
adm1026.c SENSOR_temp1_max RW
adm1026.c SENSOR_temp1_min RW
adm1026.c SENSOR_temp1_offset RW
adm1026.c alarm_mask RW
adm1026.c alarms R
adm1026.c analog_out RW
adm1026.c gpio RW
adm1026.c gpio_mask RW
adm1026.c pwm1 RW << these also should also
adm1026.c pwm1_enable RW << have SENSOR_ in front
adm1026.c temp1_auto_point1_pwm RW << of them, seems you
adm1026.c temp1_crit_enable RW << missed a group?
adm1026.c vid R
adm1026.c vrm RW

I'm assuming some magic elsewhere sees that 'SENSOR_' and removes
it before it gets to sysfs. I can test adm9240, w83627hf and it87
drivers as well as watch the overall patterns as above.

--Grant.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-05-17 22:27    [W:0.065 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site