Messages in this thread Patch in this message | | | Date | Mon, 16 May 2005 19:39:23 -0400 | From | Jeff Garzik <> | Subject | [git patches] 2.6.x net driver fixes |
| |
Here's a first experimental git push from me. The git URL is rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
but it should be noted that I would like you to pull the 'misc-fixes' branch. I'm told that branches are supposed to live in .git/refs/heads, so there you will find netdev-2.6.git/refs/heads/misc-fixes.
Does that work?
Changelog and patch for review attached.
Jeff, still afraid of trying a 'tough' merge
commit c8920ba041c8934b29370f5d62ab9ea8f147966b tree 6e0e12acd812f221906289348bc4e08cd1047df6 parent c4cc26d3310a6614a20e32276228a5d44159fc9b author Daniel Andersen <daniel@linux-user.net> Fri, 06 May 2005 05:14:09 -0700 committer Jeff Garzik <jgarzik@pobox.com> Mon, 16 May 2005 08:04:29 -0400
[PATCH] wireless: 3CRWE154G72 Kconfig help fix
Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not supported by the prism54 project. To stop confusion, the kernel documentation should state so as 3com made a good job hiding the version.
Signed-off-by: Andrew Morton <akpm@osdl.org>
diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig
-------------------------- commit c4cc26d3310a6614a20e32276228a5d44159fc9b tree 35246410bf048fb6a0aa455b272f2a2933dbacad parent 99718699f5746cc365f3a9ab4769568a1da97635 author Jiri Benc <jbenc@suse.cz> Wed, 27 Apr 2005 12:48:56 +0200 committer Jeff Garzik <jgarzik@pobox.com> Mon, 16 May 2005 07:18:48 -0400
[PATCH] Typo in tulip driver
This patch fixes a typo in tulip driver in 2.6.12-rc3.
-------------------------- commit 99718699f5746cc365f3a9ab4769568a1da97635 tree 6f8f9ad590b14514ad88c3478328795148c91e46 parent f7a3aae1723e7ffc9c4fcdb489365da7a3d81255 author Geoff Levand <geoffrey.levand@am.sony.com> Fri, 15 Apr 2005 01:20:32 -0700 committer Jeff Garzik <jgarzik@pobox.com> Mon, 16 May 2005 06:44:26 -0400
[PATCH] {PATCH] Fix IBM EMAC driver ioctl bug
Fix IBM EMAC driver ioctl bug.
I found IBM EMAC driver bug. So mii-tool command print wrong status.
# mii-tool eth0: 10 Mbit, half duplex, no link eth1: 10 Mbit, half duplex, no link
I can get correct status on fixed kernel.
# mii-tool eth0: negotiated 100baseTx-FD, link okZZ eth1: negotiated 100baseTx-FD, link ok
Hiroaki Fuse
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF
-------------------------- commit f7a3aae1723e7ffc9c4fcdb489365da7a3d81255 tree 2c0a93d730060f63670d3e7f130ee12e26b3ed8f parent 88d7bd8cb9eb8d64bf7997600b0d64f7834047c5 author Al Viro <viro@www.linux.org.uk> Sun, 03 Apr 2005 09:15:52 +0100 committer Jeff Garzik <jgarzik@pobox.com> Mon, 16 May 2005 06:22:32 -0400
[PATCH] drivers/net/wireless enabled by wrong option
NET_WIRELESS is only a subset of the stuff in drivers/net/wireless; NET_RADIO is what covers all of them. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
-------------------------- --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ -obj-$(CONFIG_NET_WIRELESS) += wireless/ +obj-$(CONFIG_NET_RADIO) += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_o static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct ocp_enet_private *fep = dev->priv; - uint *data = (uint *) & rq->ifr_ifru; + uint16_t *data = (uint16_t *) & rq->ifr_ifru; switch (cmd) { case SIOCGMIIPHY: --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_devic if (entry != 0) { /* Avoid a chip errata by prefixing a dummy entry. Don't do this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { + if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].mapping = 0; tp->tx_ring[entry].length = --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -323,7 +323,7 @@ config PRISM54 For a complete list of supported cards visit <http://prism54.org>. Here is the latest confirmed list of supported cards: - 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) Allnet ALL0271 PCI Card Compex WL54G Cardbus Card Corega CG-WLCB54GT Cardbus Card | |