[lkml]   [2005]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 4/4] psmouse: dynamic protocol switching via sysfs
Patches 1-3 are fine.

Protocol switching via sysfs works too but if I switch from LBPS/2 to
PS/2 the device name changes from "/dev/event1" to "/dev/event2" -- is
this intended?

If I do "echo -n 50 > resolution" "0xe8 0x01" is sent. I don't know if
this is correct for "usual" PS/2-devices but for the lifebook it's

For the lifebook the parameters are as following:

50cpi <=> 0x00
100cpi <=> 0x01
200cpi <=> 0x02
400cpi <=> 0x03

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-04-06 13:31    [W:0.045 / U:2.128 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site