lkml.org 
[lkml]   [2005]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Emulex fibre channel HBA support and SAN connection
FWIW, this seems to be a sparc64 issue.  after upgrading the firmware
and testing in a x86 box, all is well, at least on x86. I'll test on
AMD64 next week.

Alex

On 4/29/05, Alex Deucher <alexdeucher@gmail.com> wrote:
> On 4/29/05, James.Smart@emulex.com <James.Smart@emulex.com> wrote:
> > Based on the "Unknown IOCB command data" message, this appears to be out of date firmware on the adapter. See http://www.emulex.com/ts/indexemu.html. There are some hints on downloading firmware at the tail end of http://sourceforge.net/forum/forum.php?thread_id=1130082&forum_id=355154.
> >
> > Note: lpfc issues are best posted to the help areas on http://sourceforge.net/projects/lpfcxxxx/
>
> James,
>
> I just upgraded to the latest firmware on the Emulex website
> (3.92a2) and I still get the same error:
> Emulex LightPulse Fibre Channel SCSI driver 8.0.28
> scsi2 : on PCI bus 00 device 20 irq 8132864
> lpfc 0001:00:04.0: 0:1303 Link Up Event x1 received Data: x1 xf7 x8 x0
> lpfc 0001:00:04.0: 0:0321 Unknown IOCB command Data: x0, xa2 x0 x600 x2900
> lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> iotag x0 not found
> ...
> lpfc 0001:00:04.0: 0:0748 abort handler timed out waiting for abort to
> complete. Data: x0 x0 x0 x1
> lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> iotag x700 not found
> lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> iotag x0 not found
>
> Any ideas?
>
> >
> > Thanks.
> >
> > -- James Smart
> > Emulex
> >
> > > -----Original Message-----
> > > From: linux-scsi-owner@vger.kernel.org
> > > [mailto:linux-scsi-owner@vger.kernel.org]On Behalf Of Alex Deucher
> > > Sent: Thursday, April 28, 2005 6:03 PM
> > > To: linux-kernel@vger.kernel.org; linux-scsi@vger.kernel.org
> > > Subject: Emulex fibre channel HBA support and SAN connection
> > >
> > >
> > > Can someone point me to some documentation on setting up a fibre
> > > channel HBA in linux? I can't seem to find any useful information. I
> > > have a Sun 220R running 2.6.12-rc3 with an emulex LP9000 HBA connected
> > > to a Nexsan ATABEAST SAN. I'm using the HBA driver included with the
> > > 2.6.12rc3 kernel. I cannot find any information about the GPLed
> > > emulex driver as far as configuration goes. The driver seems to come
> > > up ok, but then I get a series of error codes:
> > >
> > > Emulex LightPulse Fibre Channel SCSI driver 8.0.28
> > > scsi0 : on PCI bus 00 device 20 irq 8255744
> > > lpfc 0001:00:04.0: 0:1303 Link Up Event x1 received Data: x1 x1 x8 x2
> > > lpfc 0001:00:04.0: 0:0321 Unknown IOCB command Data: x0, xa2
> > > x0 x900 x2600
> > > ...
> > > lpfc 0001:00:04.0: 0:0748 abort handler timed out waiting for abort to
> > > complete. Data: x0 x0 x0 x1
> > > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> > > iotag xa00 not found
> > > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> > > iotag x0 not found
> > > lpfc 0001:00:04.0: 0:0713 SCSI layer issued LUN reset (0, 0)
> > > Data: x2 x0 x0
> > > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> > > iotag xb00 not found
> > > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> > > iotag x0 not found
> > > lpfc 0001:00:04.0: 0:0714 SCSI layer issued Bus Reset Data: x2003
> > > scsi: Device offlined - not ready after error recovery: host 0 channel
> > > 0 id 0 lun 0
> > > lpfc 0001:00:04.0: 0:0327 Rsp ring 0 error - command completion for
> > > iotag x0 not found
> > >
> > > I noticed here:
> > > http://marc.theaimsgroup.com/?l=linux-scsi&m=111383889908554&w=2
> > > that there is a new FC API. Was this merged into rc3 or will this
> > > happen after 2.6.12? If it's not supported yet in rc3, how does one
> > > go about configuring it? I'm willing to test any available tools.
> > >
> > > Any help will be greatly appreciated. I'll be able to test on SPARC64
> > > right now and on AMD64 in the next few days.
> > >
> > > Thanks,
> > >
> > > Alex
> > >
> > > PS, please CC: me as I'm not subscribed.
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-04-30 00:47    [W:0.053 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site