[lkml]   [2005]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Linux 2.6.12-rc3: various swsusp problems

> there's some problems with swsusp in 2.6.12-rc3 (x86_64):

Are they new or were they in -rc2, too?

> 1. Is it necessary to print the following message during regular boot?
> swsusp: Suspend partition has wrong signature?
> It is a bit annoying and I believe it will confuse some swsusp
> users.

Hmm, feel free to provide a patch. (I need something to try git on :-).

> 2. PCMCIA related hangs during swsusp.
> swsusp hangs after freeing memory when either cardmgr is running
> or pcmcia cards are *physically* inserted. It is insufficient
> to do a 'cardctl eject' the cards must be removed, too, for
> swsusp not to hang. I do suspect some problem with the
> 'pccardd' kernel threads.

Did it work with any older kernel? Which driver is it? yenta?

> 3. Sometimes during the search for the suspend hang reason the system
> went during suspend into a lightshow of:
> eth0: Too much work at interrupt!
> and some line that ends in:
> release_console_sem+0x13d/0x1c0)
> The start of the line is not readable as it just flickers by in
> the eth0 message limbo. NIC is a built in RTL-8169 Gigabit Ethernet
> (rev 10). Oh, no chance for a serial console capture as there's no
> built in serial device in this laptop.

How repeatable is that? Will NIC work okay if you rmmod/insmod its driver?
64 bytes from icmp_seq=28 ttl=51 time=448769.1 ms

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-04-21 21:02    [W:0.117 / U:2.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site