lkml.org 
[lkml]   [2005]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: current linus bk, error mounting root
On Wed, 9 Mar 2005 22:09:26 +0100, Jens Axboe <axboe@suse.de> wrote:
> probably not worth the bother, looks like barrier problems. get the
> serial console running instead and send the full output, I'll take a
> look in the morning.

serial console boot output attached.


>
> --
> Jens Axboe
>
>


--
Jon Smirl
jonsmirl@gmail.com
Linux version 2.6.11-bk5 (jonsmirl@jonsmirl.smirl.net) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #3 SMP Wed Mar 9 18:36:46 EST 2005

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)

BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000003ff74000 (usable)

BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS)

BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data)

BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved)

BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)

BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)

BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)

BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)

BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)

127MB HIGHMEM available.

896MB LOWMEM available.

found SMP MP-table at 000fe710

DMI 2.3 present.

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 15:2 APIC version 20

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

Processor #1 15:2 APIC version 20

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)

ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)

ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Enabling APIC mode: Flat. Using 1 I/O APICs

Using ACPI (MADT) for SMP configuration information

Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)

Built 1 zonelists

Kernel command line: ro root=LABEL=/ console=ttyS0

Initializing CPU#0

CPU 0 irqstacks, hard=c03b3000 soft=c03b1000

PID hash table entries: 4096 (order: 12, 65536 bytes)

Detected 2793.222 MHz processor.

Using tsc for high-res timesource

Console: colour VGA+ 80x25

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 1034896k/1048016k available (1576k kernel code, 12396k reserved, 963k data, 188k init, 130512k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Security Framework v1.0.0 initialized

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Physical Processor ID: 0

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

CPU0: Thermal monitoring enabled

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09

per-CPU timeslice cutoff: 1462.56 usecs.

task migration cache decay timeout: 2 msecs.

Booting processor 1/1 eip 3000

CPU 1 irqstacks, hard=c03b4000 soft=c03b2000

Initializing CPU#1

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Physical Processor ID: 0

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#1.

CPU1: Intel P4/Xeon Extended MCE MSRs (12) available

CPU1: Thermal monitoring enabled

CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09

Total of 2 processors activated (11091.96 BogoMIPS).

ENABLING IO-APIC IRQs

..TIMER: vector=0x31 pin1=2 pin2=-1

checking TSC synchronization across 2 CPUs: passed.

Brought up 2 CPUs

checking if image is initramfs... it is

Freeing initrd memory: 318k freed

NET: Registered protocol family 16

PCI: PCI BIOS revision 2.10 entry at 0xfba5e, last bus=2

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

ACPI: Subsystem revision 20050211

ACPI: Interpreter enabled

ACPI: Using IOAPIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Probing PCI hardware (bus 00)

PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

PCI: Transparent bridge - 0000:00:1e.0

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)

ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)

ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)

ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)

ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.

ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 15)

ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 15)

ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)

SCSI subsystem initialized

PCI: Using ACPI for IRQ routing

PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

Simple Boot Flag value 0x87 read from CMOS RAM was invalid

Simple Boot Flag at 0x7a set to 0x1

Machine check exception polling timer started.

audit: initializing netlink socket (disabled)

audit(1110395018.538:0): initialized

highmem bounce pool size: 64 pages

Initializing Cryptographic API

ACPI: PS/2 Keyboard Controller [KBD] at I/O 0x60, 0x64, irq 1

ACPI: PS/2 Mouse Controller [MOU] at irq 12

serio: i8042 AUX port at 0x60,0x64 irq 12

serio: i8042 KBD port at 0x60,0x64 irq 1

Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize

loop: loaded (max 8 devices)

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ICH5: IDE controller at PCI slot 0000:00:1f.1

ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169

ICH5: chipset revision 2

ICH5: not 100% native mode: will probe irqs later

ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA

hda: IC35L060AVV207-0, ATA DISK drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hdc: DVD-RW IDE1008, ATAPI CD/DVD-ROM drive

hdd: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive

ide1 at 0x170-0x177,0x376 on irq 15

hda: max request size: 1024KiB

hda: 78125000 sectors (40000 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)

hda: cache flushes supported

hda: hda1 hda2 hda3 hda4

hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.20

hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)

mice: PS/2 mouse device common for all mice

md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27

NET: Registered protocol family 2

IP: routing cache hash table of 8192 buckets, 64Kbytes

TCP established hash table entries: 262144 (order: 9, 2097152 bytes)

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

TCP: Hash tables configured (established 262144 bind 65536)

Starting balanced_irq

ACPI wakeup devices:

VBTN PCI0 USB0 USB1 USB2 USB3 PCI1 MOU

ACPI: (supports S0 S1 S4 S5)

Freeing unused kernel memory: 188k freed

Red Hat nash version 4.1.18 starting
Mounted /proc filesystem
md: raid1 personality registered as nr 3

Mounting sysfs
md: Autodetecting RAID arrays.

Creating /dev
SACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169

tarting udev
Lomd: autorun ...

md: considering hda2 ...

md: adding hda2 ...

md: created md0

md: bind<hda2>

md: running: <hda2>

ading libata.ko raid1: raid set md0 active with 1 out of 2 mirrors

md: ... autorun DONE.

module
Loading ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 169

ata_piix.ko moduata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 169

le
Loading raidKernel panic - not syncing: Attempted to kill init!

1.ko module
Cre ating root devic
\
 
 \ /
  Last update: 2005-03-22 14:11    [W:2.266 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site