lkml.org 
[lkml]   [2005]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 2.6.11-rc3 05/08] ide: use ide_task_t->tf.protocol instead of ide_task_t->data_phase
From
Date

05_ide_use_protocol.patch

Remove ide_task_t->{data_phase,command_type,prehandler,rq} and
use tf->protocol instead. Now the protocol value wholey
defines how to drive a taskfile except for NODATA cases where
a caller can optionally specify handler (for special
commands). The following behavior changes occur.

* ide_taskfile_ioctl(): req_task->command_type is ignored.
This doesn't make any difference except for error/crash
cases in the original code.

Signed-off-by: Tejun Heo <htejun@gmail.com>

drivers/ide/ide-disk.c | 70 +++++-------
drivers/ide/ide-io.c | 29 +----
drivers/ide/ide-taskfile.c | 257 ++++++++++++++++++---------------------------
include/linux/ide.h | 11 -
4 files changed, 142 insertions(+), 225 deletions(-)

Index: linux-taskfile-ng/drivers/ide/ide-disk.c
===================================================================
--- linux-taskfile-ng.orig/drivers/ide/ide-disk.c 2005-03-05 10:46:59.081957489 +0900
+++ linux-taskfile-ng/drivers/ide/ide-disk.c 2005-03-05 10:46:59.684863236 +0900
@@ -233,10 +233,10 @@ ide_startstop_t __ide_do_rw_disk (ide_dr

if (rq_data_dir(rq) == READ) {
if (drive->mult_count) {
- hwif->data_phase = TASKFILE_MULTI_IN;
+ hwif->protocol = ATA_PROT_PIO_MULT;
command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD;
} else {
- hwif->data_phase = TASKFILE_IN;
+ hwif->protocol = ATA_PROT_PIO;
command = lba48 ? WIN_READ_EXT : WIN_READ;
}

@@ -245,10 +245,10 @@ ide_startstop_t __ide_do_rw_disk (ide_dr
return ide_started;
} else {
if (drive->mult_count) {
- hwif->data_phase = TASKFILE_MULTI_OUT;
+ hwif->protocol = ATA_PROT_PIO_MULT;
command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
} else {
- hwif->data_phase = TASKFILE_OUT;
+ hwif->protocol = ATA_PROT_PIO;
command = lba48 ? WIN_WRITE_EXT : WIN_WRITE;
}

@@ -301,6 +301,7 @@ static u64 idedisk_read_native_max_addre
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_OUT_DEVICE | ATA_TFLAG_IN_ADDR;
tf->device = ATA_LBA;
if (lba48) {
@@ -311,11 +312,8 @@ static u64 idedisk_read_native_max_addre
tf->command = WIN_READ_NATIVE_MAX;
}

- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
-
/* submit command request */
- if (ide_raw_taskfile(drive, &args, NULL) == 0) {
+ if (ide_raw_taskfile(drive, &args, 0, NULL) == 0) {
/* if OK, compute maximum address value */
addr = ide_tf_get_address(drive, tf);
addr++; /* since the return value is (maxlba - 1), we add 1 */
@@ -337,6 +335,7 @@ static u64 idedisk_set_max_address(ide_d
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_OUT_DEVICE | ATA_TFLAG_ISADDR;
tf->device = ATA_LBA;
tf->lbal = addr_req;
@@ -354,11 +353,8 @@ static u64 idedisk_set_max_address(ide_d
tf->command = WIN_SET_MAX;
}

- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
-
/* submit command request */
- if (ide_raw_taskfile(drive, &args, NULL) == 0) {
+ if (ide_raw_taskfile(drive, &args, 0, NULL) == 0) {
addr_set = ide_tf_get_address(drive, tf);
addr_set++;
}
@@ -474,15 +470,14 @@ static int smart_enable(ide_drive_t *dri

memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_OUT_ADDR;
tf->feature = SMART_ENABLE;
tf->lbam = SMART_LCYL_PASS;
tf->lbah = SMART_HCYL_PASS;
tf->command = WIN_SMART;

- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
- return ide_raw_taskfile(drive, &args, NULL);
+ return ide_raw_taskfile(drive, &args, 0, NULL);
}

static int get_smart_values(ide_drive_t *drive, u8 *buf)
@@ -490,8 +485,11 @@ static int get_smart_values(ide_drive_t
ide_task_t args;
struct ata_taskfile *tf = &args.tf;

+ smart_enable(drive);
+
memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_PIO;
tf->flags = ATA_TFLAG_OUT_ADDR;
tf->feature = SMART_READ_VALUES;
tf->nsect = 1;
@@ -499,11 +497,7 @@ static int get_smart_values(ide_drive_t
tf->lbah = SMART_HCYL_PASS;
tf->command = WIN_SMART;

- args.command_type = IDE_DRIVE_TASK_IN;
- args.data_phase = TASKFILE_IN;
- args.handler = &task_in_intr;
- (void) smart_enable(drive);
- return ide_raw_taskfile(drive, &args, buf);
+ return ide_raw_taskfile(drive, &args, READ, buf);
}

static int get_smart_thresholds(ide_drive_t *drive, u8 *buf)
@@ -511,8 +505,11 @@ static int get_smart_thresholds(ide_driv
ide_task_t args;
struct ata_taskfile *tf = &args.tf;

+ smart_enable(drive);
+
memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_PIO;
tf->flags = ATA_TFLAG_OUT_ADDR;
tf->feature = SMART_READ_THRESHOLDS;
tf->nsect = 1;
@@ -520,11 +517,7 @@ static int get_smart_thresholds(ide_driv
tf->lbah = SMART_HCYL_PASS;
tf->command = WIN_SMART;

- args.command_type = IDE_DRIVE_TASK_IN;
- args.data_phase = TASKFILE_IN;
- args.handler = &task_in_intr;
- (void) smart_enable(drive);
- return ide_raw_taskfile(drive, &args, buf);
+ return ide_raw_taskfile(drive, &args, READ, buf);
}

static int proc_idedisk_read_cache
@@ -673,13 +666,11 @@ static int write_cache(ide_drive_t *driv

memset(&args, 0, sizeof(ide_task_t));

- tf->feature = arg ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
- tf->command = WIN_SETFEATURES;
-
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
+ tf->protocol = ATA_PROT_NODATA;
+ tf->feature = arg ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
+ tf->command = WIN_SETFEATURES;

- err = ide_raw_taskfile(drive, &args, NULL);
+ err = ide_raw_taskfile(drive, &args, 0, NULL);
if (err)
return err;

@@ -694,14 +685,13 @@ static int set_acoustic (ide_drive_t *dr

memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_NODATA;
tf->feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM;
tf->nsect = arg;
tf->command = WIN_SETFEATURES;

- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
- ide_raw_taskfile(drive, &args, NULL);
drive->acoustic = arg;
+
return 0;
}

@@ -884,7 +874,7 @@ static void ide_cacheflush_p(ide_drive_t

ide_task_init_flush(drive, &task);

- if (ide_raw_taskfile(drive, &task, NULL))
+ if (ide_raw_taskfile(drive, &task, 0, NULL))
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
}

@@ -984,16 +974,15 @@ static int idedisk_open(struct inode *in
if (drive->removable && drive->usage == 1) {
ide_task_t args;
memset(&args, 0, sizeof(ide_task_t));
+ args.tf.protocol = ATA_PROT_NODATA;
args.tf.command = WIN_DOORLOCK;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
check_disk_change(inode->i_bdev);
/*
* Ignore the return code from door_lock,
* since the open() has already succeeded,
* and the door_lock is irrelevant at this point.
*/
- if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
+ if (drive->doorlocking && ide_raw_taskfile(drive, &args, 0, NULL))
drive->doorlocking = 0;
}
return 0;
@@ -1010,10 +999,9 @@ static int idedisk_release(struct inode
if (drive->removable && drive->usage == 1) {
ide_task_t args;
memset(&args, 0, sizeof(ide_task_t));
+ args.tf.protocol = ATA_PROT_NODATA;
args.tf.command = WIN_DOORUNLOCK;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.handler = &task_no_data_intr;
- if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
+ if (drive->doorlocking && ide_raw_taskfile(drive, &args, 0, NULL))
drive->doorlocking = 0;
}
drive->usage--;
Index: linux-taskfile-ng/drivers/ide/ide-io.c
===================================================================
--- linux-taskfile-ng.orig/drivers/ide/ide-io.c 2005-03-05 10:46:59.084957020 +0900
+++ linux-taskfile-ng/drivers/ide/ide-io.c 2005-03-05 10:46:59.685863080 +0900
@@ -61,6 +61,7 @@ void ide_task_init_flush(ide_drive_t *dr

memset(task, 0, sizeof(*task));

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_IN_ADDR | ATA_TFLAG_IN_DEVICE;

if (ide_id_has_flush_cache_ext(drive->id) &&
@@ -69,9 +70,6 @@ void ide_task_init_flush(ide_drive_t *dr
tf->flags |= ATA_TFLAG_IN_LBA48;
} else
tf->command = WIN_FLUSH_CACHE;
-
- task->command_type = IDE_DRIVE_TASK_NO_DATA;
- task->handler = &task_no_data_intr;
}

EXPORT_SYMBOL_GPL(ide_task_init_flush);
@@ -261,17 +259,13 @@ static ide_startstop_t ide_start_power_s
return do_rw_taskfile(drive, args);

case idedisk_pm_standby: /* Suspend step 2 (standby) */
+ tf->protocol = ATA_PROT_NODATA;
tf->command = WIN_STANDBYNOW1;
-
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
- args->handler = &task_no_data_intr;
return do_rw_taskfile(drive, args);

case idedisk_pm_idle: /* Resume step 1 (idle) */
+ tf->protocol = ATA_PROT_NODATA;
tf->command = WIN_IDLEIMMEDIATE;
-
- args->command_type = IDE_DRIVE_TASK_NO_DATA;
- args->handler = task_no_data_intr;
return do_rw_taskfile(drive, args);

case ide_pm_restore_dma: /* Resume step 2 (restore DMA) */
@@ -755,6 +749,7 @@ static void ide_init_specify_cmd(ide_dri
{
struct ata_taskfile *tf = &task->tf;

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_OUT_ADDR | ATA_TFLAG_OUT_DEVICE;
tf->nsect = drive->sect;
tf->lbal = drive->sect;
@@ -770,6 +765,7 @@ static void ide_init_restore_cmd(ide_dri
{
struct ata_taskfile *tf = &task->tf;

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_OUT_ADDR;
tf->nsect = drive->sect;
tf->command = WIN_RESTORE;
@@ -781,6 +777,7 @@ static void ide_init_setmult_cmd(ide_dri
{
struct ata_taskfile *tf = &task->tf;

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_OUT_ADDR;
tf->nsect = drive->mult_req;
tf->command = WIN_SETMULT;
@@ -794,7 +791,6 @@ static ide_startstop_t ide_disk_special(
ide_task_t args;

memset(&args, 0, sizeof(ide_task_t));
- args.command_type = IDE_DRIVE_TASK_NO_DATA;

if (s->b.set_geometry) {
s->b.set_geometry = 0;
@@ -900,19 +896,6 @@ static ide_startstop_t execute_drive_cmd
if (!args)
goto done;

- hwif->data_phase = args->data_phase;
-
- switch (hwif->data_phase) {
- case TASKFILE_MULTI_OUT:
- case TASKFILE_OUT:
- case TASKFILE_MULTI_IN:
- case TASKFILE_IN:
- ide_init_sg_cmd(drive, rq);
- ide_map_sg(drive, rq);
- default:
- break;
- }
-
return do_rw_taskfile(drive, args);
} else if (rq->flags & REQ_DRIVE_CMD) {
u8 *args = rq->buffer;
Index: linux-taskfile-ng/drivers/ide/ide-taskfile.c
===================================================================
--- linux-taskfile-ng.orig/drivers/ide/ide-taskfile.c 2005-03-05 10:46:59.092955770 +0900
+++ linux-taskfile-ng/drivers/ide/ide-taskfile.c 2005-03-05 10:46:59.686862923 +0900
@@ -6,25 +6,6 @@
* Copyright (C) 2001-2002 Klaus Smolin
* IBM Storage Technology Division
* Copyright (C) 2003-2004 Bartlomiej Zolnierkiewicz
- *
- * The big the bad and the ugly.
- *
- * Problems to be fixed because of BH interface or the lack therefore.
- *
- * Fill me in stupid !!!
- *
- * HOST:
- * General refers to the Controller and Driver "pair".
- * DATA HANDLER:
- * Under the context of Linux it generally refers to an interrupt handler.
- * However, it correctly describes the 'HOST'
- * DATA BLOCK:
- * The amount of data needed to be transfered as predefined in the
- * setup of the device.
- * STORAGE ATOMIC:
- * The 'DATA BLOCK' associated to the 'DATA HANDLER', and can be as
- * small as a single sector or as large as the entire command block
- * request.
*/

#include <linux/config.h>
@@ -174,29 +155,44 @@ int taskfile_lib_get_identify (ide_drive

memset(&args, 0, sizeof(ide_task_t));

+ tf->protocol = ATA_PROT_PIO;
tf->nsect = 1;
if (drive->media == ide_disk)
tf->command = WIN_IDENTIFY;
else
tf->command = WIN_PIDENTIFY;

- args.command_type = IDE_DRIVE_TASK_IN;
- args.data_phase = TASKFILE_IN;
- args.handler = &task_in_intr;
- return ide_raw_taskfile(drive, &args, buf);
+ return ide_raw_taskfile(drive, &args, READ, buf);
+}
+
+static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
+{
+ ide_task_t *args = HWGROUP(drive)->rq->special;
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 stat;
+
+ local_irq_enable();
+ if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) {
+ return ide_error(drive, "task_no_data_intr", stat);
+ /* calls ide_end_drive_cmd */
+ }
+ if (args)
+ ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG));
+
+ return ide_stopped;
}

ide_startstop_t do_rw_taskfile(ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->hwgroup->rq;
struct ata_taskfile *tf = &task->tf;
+ ide_handler_t *handler = NULL; /* shut up, gcc */

/* We check this in ide_taskfile_ioctl(), but the setting could
have been changed inbetween. */
- if ((task->data_phase == TASKFILE_MULTI_IN ||
- task->data_phase == TASKFILE_MULTI_OUT) && !drive->mult_count) {
- printk(KERN_ERR "%s: multimode not set!\n",
- drive->name);
+ if (tf->protocol == ATA_PROT_PIO_MULT && !drive->mult_count) {
+ printk(KERN_ERR "%s: multimode not set!\n", drive->name);
/* FIXME: this path is an infinite loop. */
return ide_stopped;
}
@@ -210,22 +206,24 @@ ide_startstop_t do_rw_taskfile(ide_drive
tf->device |= drive->select.all & ~ATA_LBA;
ide_load_taskfile(drive, task);

- if (task->handler != NULL) {
- if (task->prehandler != NULL) {
+ hwif->protocol = tf->protocol;
+
+ switch (tf->protocol) {
+ case ATA_PROT_NODATA:
+ handler = task->handler ?: task_no_data_intr;
+ break;
+ case ATA_PROT_PIO:
+ case ATA_PROT_PIO_MULT:
+ ide_init_sg_cmd(drive, rq);
+ ide_map_sg(drive, rq);
+ if (rq_data_dir(rq) == WRITE) {
hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG);
ndelay(400); /* FIXME */
- return task->prehandler(drive, task->rq);
- }
- ide_execute_command(drive, tf->command, task->handler,
- WAIT_WORSTCASE, NULL);
- return ide_started;
- }
-
- switch (task->data_phase) {
- case TASKFILE_OUT_DMAQ:
- case TASKFILE_OUT_DMA:
- case TASKFILE_IN_DMAQ:
- case TASKFILE_IN_DMA:
+ return pre_task_out_intr(drive, rq);
+ } else
+ handler = task_in_intr;
+ break;
+ case ATA_PROT_DMA:
if (!hwif->dma_setup(drive)) {
hwif->dma_exec_cmd(drive, tf->command);
hwif->dma_start(drive);
@@ -233,8 +231,12 @@ ide_startstop_t do_rw_taskfile(ide_drive
}
return ide_stopped;
default:
- return ide_stopped;
+ BUG();
}
+
+ ide_execute_command(drive, tf->command, handler, WAIT_WORSTCASE, NULL);
+
+ return ide_started;
}

EXPORT_SYMBOL(do_rw_taskfile);
@@ -294,28 +296,6 @@ ide_startstop_t recal_intr (ide_drive_t
return ide_stopped;
}

-/*
- * Handler for commands without a data phase
- */
-ide_startstop_t task_no_data_intr(ide_drive_t *drive)
-{
- ide_task_t *args = HWGROUP(drive)->rq->special;
- ide_hwif_t *hwif = HWIF(drive);
- u8 stat;
-
- local_irq_enable();
- if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) {
- return ide_error(drive, "task_no_data_intr", stat);
- /* calls ide_end_drive_cmd */
- }
- if (args)
- ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG));
-
- return ide_stopped;
-}
-
-EXPORT_SYMBOL(task_no_data_intr);
-
static u8 wait_drive_not_busy(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -403,15 +383,10 @@ static inline void ide_pio_datablock(ide
drive->io_32bit = 0;
}

- switch (drive->hwif->data_phase) {
- case TASKFILE_MULTI_IN:
- case TASKFILE_MULTI_OUT:
+ if (drive->hwif->protocol == ATA_PROT_PIO_MULT)
ide_pio_multi(drive, write);
- break;
- default:
+ else
ide_pio_sector(drive, write);
- break;
- }

drive->io_32bit = saved_io_32bit;
}
@@ -423,22 +398,12 @@ static ide_startstop_t task_error(ide_dr
ide_hwif_t *hwif = drive->hwif;
int sectors = hwif->nsect - hwif->nleft;

- switch (hwif->data_phase) {
- case TASKFILE_IN:
- if (hwif->nleft)
- break;
- /* fall through */
- case TASKFILE_OUT:
- sectors--;
- break;
- case TASKFILE_MULTI_IN:
- if (hwif->nleft)
- break;
- /* fall through */
- case TASKFILE_MULTI_OUT:
- sectors -= drive->mult_count;
- default:
- break;
+ if (hwif->protocol == ATA_PROT_PIO) {
+ if (rq_data_dir(rq) == WRITE || hwif->nleft == 0)
+ sectors--;
+ } else {
+ if (rq_data_dir(rq) == WRITE || hwif->nleft == 0)
+ sectors -= drive->mult_count;
}

if (sectors > 0) {
@@ -534,9 +499,9 @@ ide_startstop_t pre_task_out_intr (ide_d
if (ide_wait_stat(&startstop, drive, DATA_READY,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
- drive->name,
- drive->hwif->data_phase ? "MULT" : "",
- drive->addressing ? "_EXT" : "");
+ drive->name,
+ drive->hwif->protocol == ATA_PROT_PIO_MULT ? "MULT" : "",
+ drive->addressing ? "_EXT" : "");
return startstop;
}

@@ -550,7 +515,8 @@ ide_startstop_t pre_task_out_intr (ide_d
}
EXPORT_SYMBOL(pre_task_out_intr);

-static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long data_size, u8 *buf)
+static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args,
+ int rw, unsigned long data_size, u8 *buf)
{
struct request rq;

@@ -564,7 +530,7 @@ static int ide_diag_taskfile(ide_drive_t
* if we would find a solution to transfer any size.
* To support special commands like READ LONG.
*/
- if (args->command_type != IDE_DRIVE_TASK_NO_DATA) {
+ if (args->tf.protocol != ATA_PROT_NODATA) {
if (data_size == 0)
rq.nr_sectors = (args->tf.hob_nsect << 8) | args->tf.nsect;
else
@@ -579,7 +545,7 @@ static int ide_diag_taskfile(ide_drive_t
rq.hard_nr_sectors = rq.nr_sectors;
rq.hard_cur_sectors = rq.current_nr_sectors = rq.nr_sectors;

- if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE)
+ if (rw == WRITE)
rq.flags |= REQ_RW;
}

@@ -587,14 +553,14 @@ static int ide_diag_taskfile(ide_drive_t
return ide_do_drive_cmd(drive, &rq, ide_wait);
}

-int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf)
+int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, int rw, u8 *buf)
{
- return ide_diag_taskfile(drive, args, 0, buf);
+ return ide_diag_taskfile(drive, args, rw, 0, buf);
}

EXPORT_SYMBOL(ide_raw_taskfile);

-int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
+int ide_taskfile_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg)
{
ide_task_request_t *req_task;
ide_task_t args;
@@ -607,8 +573,6 @@ int ide_taskfile_ioctl (ide_drive_t *dri
int taskout = 0;
char __user *buf = (char __user *)arg;

-// printk("IDE Taskfile ...\n");
-
req_task = kmalloc(tasksize, GFP_KERNEL);
if (req_task == NULL) return -ENOMEM;
memset(req_task, 0, tasksize);
@@ -716,54 +680,47 @@ int ide_taskfile_ioctl (ide_drive_t *dri

tf->flags |= ATA_TFLAG_IO_16BIT;

- args.data_phase = req_task->data_phase;
- args.command_type = req_task->req_cmd;
+ if ((req_task->data_phase == TASKFILE_MULTI_IN ||
+ req_task->data_phase == TASKFILE_MULTI_OUT) && !drive->mult_count) {
+ printk(KERN_ERR "%s: multimode not set!\n", drive->name);
+ err = -EPERM;
+ goto abort;
+ }

- switch(req_task->data_phase) {
- case TASKFILE_OUT_DMAQ:
- case TASKFILE_OUT_DMA:
- err = ide_diag_taskfile(drive, &args, taskout, outbuf);
- break;
- case TASKFILE_IN_DMAQ:
- case TASKFILE_IN_DMA:
- err = ide_diag_taskfile(drive, &args, taskin, inbuf);
- break;
- case TASKFILE_MULTI_OUT:
- if (!drive->mult_count) {
- /* (hs): give up if multcount is not set */
- printk(KERN_ERR "%s: %s Multimode Write " \
- "multcount is not set\n",
- drive->name, __FUNCTION__);
- err = -EPERM;
- goto abort;
- }
- /* fall through */
- case TASKFILE_OUT:
- args.prehandler = &pre_task_out_intr;
- args.handler = &task_out_intr;
- err = ide_diag_taskfile(drive, &args, taskout, outbuf);
- break;
- case TASKFILE_MULTI_IN:
- if (!drive->mult_count) {
- /* (hs): give up if multcount is not set */
- printk(KERN_ERR "%s: %s Multimode Read failure " \
- "multcount is not set\n",
- drive->name, __FUNCTION__);
- err = -EPERM;
- goto abort;
- }
- /* fall through */
- case TASKFILE_IN:
- args.handler = &task_in_intr;
- err = ide_diag_taskfile(drive, &args, taskin, inbuf);
- break;
- case TASKFILE_NO_DATA:
- args.handler = &task_no_data_intr;
- err = ide_diag_taskfile(drive, &args, 0, NULL);
- break;
- default:
- err = -EFAULT;
- goto abort;
+ switch (req_task->data_phase) {
+ case TASKFILE_NO_DATA:
+ tf->protocol = ATA_PROT_NODATA;
+ err = ide_diag_taskfile(drive, &args, 0, 0, NULL);
+ break;
+ case TASKFILE_IN:
+ tf->protocol = ATA_PROT_PIO;
+ err = ide_diag_taskfile(drive, &args, READ, taskin, inbuf);
+ break;
+ case TASKFILE_OUT:
+ tf->protocol = ATA_PROT_PIO;
+ err = ide_diag_taskfile(drive, &args, WRITE, taskout, outbuf);
+ break;
+ case TASKFILE_MULTI_IN:
+ tf->protocol = ATA_PROT_PIO_MULT;
+ err = ide_diag_taskfile(drive, &args, READ, taskin, inbuf);
+ break;
+ case TASKFILE_MULTI_OUT:
+ tf->protocol = ATA_PROT_PIO_MULT;
+ err = ide_diag_taskfile(drive, &args, WRITE, taskout, outbuf);
+ break;
+ case TASKFILE_IN_DMAQ:
+ case TASKFILE_IN_DMA:
+ tf->protocol = ATA_PROT_DMA;
+ err = ide_diag_taskfile(drive, &args, READ, taskin, inbuf);
+ break;
+ case TASKFILE_OUT_DMAQ:
+ case TASKFILE_OUT_DMA:
+ tf->protocol = ATA_PROT_DMA;
+ err = ide_diag_taskfile(drive, &args, WRITE, taskout, outbuf);
+ break;
+ default:
+ err = -EFAULT; /* FIXME: -EFAULT? really? */
+ goto abort;
}

if (req_task->data_phase == TASKFILE_NO_DATA ||
@@ -810,9 +767,6 @@ abort:
kfree(outbuf);
if (inbuf != NULL)
kfree(inbuf);
-
-// printk("IDE Taskfile ioctl ended. rc = %i\n", err);
-
return err;
}

@@ -901,6 +855,7 @@ int ide_task_ioctl(ide_drive_t *drive, u

memset(&task, 0, sizeof(task));

+ tf->protocol = ATA_PROT_NODATA;
tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;

tf->command = args[0];
@@ -911,11 +866,7 @@ int ide_task_ioctl(ide_drive_t *drive, u
tf->lbah = args[5];
tf->device = args[6] & ~ATA_DEV1;

- task.command_type = IDE_DRIVE_TASK_NO_DATA;
- task.data_phase = TASKFILE_NO_DATA;
- task.handler = &task_no_data_intr;
-
- err = ide_diag_taskfile(drive, &task, 0, NULL);
+ err = ide_diag_taskfile(drive, &task, 0, 0, NULL);

args[0] = tf->command;
args[1] = tf->feature;
Index: linux-taskfile-ng/include/linux/ide.h
===================================================================
--- linux-taskfile-ng.orig/include/linux/ide.h 2005-03-05 10:46:59.483894654 +0900
+++ linux-taskfile-ng/include/linux/ide.h 2005-03-05 10:46:59.687862767 +0900
@@ -867,8 +867,8 @@ typedef struct hwif_s {
int sg_nents; /* Current number of entries in it */
int sg_dma_direction; /* dma transfer direction */

- /* data phase of the active command (currently only valid for PIO/DMA) */
- int data_phase;
+ /* protocol of the active command */
+ int protocol;

unsigned int nsect;
unsigned int nleft;
@@ -928,11 +928,7 @@ typedef struct ide_task_s {
u16 data;
unsigned load_data:1;
unsigned read_data:1;
- int data_phase;
- int command_type;
- ide_pre_handler_t *prehandler;
ide_handler_t *handler;
- struct request *rq; /* copy of request */
} ide_task_t;

typedef struct hwgroup_s {
@@ -1288,11 +1284,10 @@ void task_end_request(ide_drive_t *drive
extern ide_startstop_t set_multmode_intr(ide_drive_t *);
extern ide_startstop_t set_geometry_intr(ide_drive_t *);
extern ide_startstop_t recal_intr(ide_drive_t *);
-extern ide_startstop_t task_no_data_intr(ide_drive_t *);
extern ide_startstop_t task_in_intr(ide_drive_t *);
extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);

-extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
+extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, int, u8 *);

int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.077 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site