lkml.org 
[lkml]   [2005]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] convert pci_dev->slot_name usage to pci_name()
Date
From
ChangeSet 1.1998.11.6, 2005/02/07 14:36:14-08:00, davej@redhat.com

[PATCH] convert pci_dev->slot_name usage to pci_name()

Prepare for removal of pci_dev->slot_name

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


arch/frv/mb93090-mb00/pci-frv.c | 4 +--
arch/frv/mb93090-mb00/pci-vdk.c | 6 ++---
arch/mips/pmc-sierra/yosemite/ht.c | 6 ++---
arch/ppc/kernel/pci.c | 2 -
arch/sh/drivers/pci/fixups-sh03.c | 4 +--
arch/sh/drivers/pci/pci-sh7751.c | 8 +++----
arch/sh/drivers/pci/pci-st40.c | 2 -
arch/sh64/kernel/pci_sh5.c | 2 -
arch/sh64/kernel/pcibios.c | 4 +--
drivers/char/agp/generic.c | 2 -
drivers/char/agp/sis-agp.c | 2 -
drivers/ide/pci/sgiioc4.c | 6 ++---
drivers/isdn/hisax/hisax_fcpcipnp.c | 2 -
drivers/media/common/saa7146_video.c | 2 -
drivers/media/video/meye.c | 2 -
drivers/media/video/zoran_driver.c | 2 -
drivers/net/defxx.c | 2 -
drivers/net/r8169.c | 4 +--
drivers/net/s2io.c | 2 -
drivers/net/sk98lin/skethtool.c | 2 -
drivers/net/sk98lin/skge.c | 2 -
drivers/net/tulip/tulip.h | 2 -
drivers/net/typhoon.c | 2 -
drivers/net/via-velocity.c | 2 -
drivers/net/wan/wanxl.c | 38 ++++++++++++++---------------------
drivers/parisc/dino.c | 5 +---
drivers/pci/pci.c | 2 -
drivers/pci/probe.c | 1
drivers/pci/setup-res.c | 2 -
drivers/pcmcia/yenta_socket.c | 2 -
drivers/scsi/qla2xxx/qla_os.c | 14 ++++++------
31 files changed, 65 insertions(+), 73 deletions(-)

diff -Nru a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
--- a/arch/frv/mb93090-mb00/pci-frv.c 2005-03-04 12:43:34 -08:00
+++ b/arch/frv/mb93090-mb00/pci-frv.c 2005-03-04 12:43:34 -08:00
@@ -43,7 +43,7 @@
pci_read_config_dword(dev, reg, &check);
if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", dev->slot_name, resource,
+ "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
new, check);
}
}
@@ -128,7 +128,7 @@
continue;
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0)
- printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, dev->slot_name);
+ printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
}
}
pcibios_allocate_bus_resources(&bus->children);
diff -Nru a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
--- a/arch/frv/mb93090-mb00/pci-vdk.c 2005-03-04 12:43:34 -08:00
+++ b/arch/frv/mb93090-mb00/pci-vdk.c 2005-03-04 12:43:34 -08:00
@@ -294,7 +294,7 @@
*/
int i;

- printk("PCI: Fixing base address flags for device %s\n", d->slot_name);
+ printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
for(i=0; i<4; i++)
d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
}
@@ -308,7 +308,7 @@
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
- printk("PCI: IDE base address fixup for %s\n", d->slot_name);
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i=0; i<4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
@@ -326,7 +326,7 @@
* There exist PCI IDE controllers which have utter garbage
* in first four base registers. Ignore that.
*/
- printk("PCI: IDE base address trash cleared for %s\n", d->slot_name);
+ printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
for(i=0; i<4; i++)
d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
}
diff -Nru a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
--- a/arch/mips/pmc-sierra/yosemite/ht.c 2005-03-04 12:43:34 -08:00
+++ b/arch/mips/pmc-sierra/yosemite/ht.c 2005-03-04 12:43:34 -08:00
@@ -303,7 +303,7 @@
if (!r->start && r->end) {
printk(KERN_ERR
"PCI: Device %s not available because of "
- "resource collisions\n", dev->slot_name);
+ "resource collisions\n", pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
@@ -377,7 +377,7 @@
((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :
PCI_BASE_ADDRESS_MEM_MASK)) {
printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", dev->slot_name, resource,
+ "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
new, check);
}
}
@@ -396,7 +396,7 @@
addresses kilobyte aligned. */
if (size > 0x100) {
printk(KERN_ERR "PCI: I/O Region %s/%d too large"
- " (%ld bytes)\n", dev->slot_name,
+ " (%ld bytes)\n", pci_name(dev),
dev->resource - res, size);
}

diff -Nru a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
--- a/arch/ppc/kernel/pci.c 2005-03-04 12:43:34 -08:00
+++ b/arch/ppc/kernel/pci.c 2005-03-04 12:43:34 -08:00
@@ -1058,7 +1058,7 @@
return;
res = *(bus->resource[0]);

- DBG("Remapping Bus %d, bridge: %s\n", bus->number, bridge->slot_name);
+ DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
DBG(" IO window: %08lx-%08lx\n", res.start, res.end);
diff -Nru a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c
--- a/arch/sh/drivers/pci/fixups-sh03.c 2005-03-04 12:43:34 -08:00
+++ b/arch/sh/drivers/pci/fixups-sh03.c 2005-03-04 12:43:34 -08:00
@@ -46,11 +46,11 @@
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
irq = pcibios_map_platform_irq(slot, pin, dev);
if( irq < 0 ) {
- pr_debug("PCI: Error mapping IRQ on device %s\n", dev->slot_name);
+ pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
return irq;
}

- pr_debug("Setting IRQ for slot %s to %d\n", dev->slot_name, irq);
+ pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);

return irq;
}
diff -Nru a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
--- a/arch/sh/drivers/pci/pci-sh7751.c 2005-03-04 12:43:34 -08:00
+++ b/arch/sh/drivers/pci/pci-sh7751.c 2005-03-04 12:43:34 -08:00
@@ -169,7 +169,7 @@
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
- pr_debug("PCI: IDE base address fixup for %s\n", d->slot_name);
+ pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i=0; i<4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
@@ -401,11 +401,11 @@
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
irq = pcibios_map_platform_irq(slot,pin);
if( irq < 0 ) {
- pr_debug("PCI: Error mapping IRQ on device %s\n", dev->slot_name);
+ pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
return irq;
}
-
- pr_debug("Setting IRQ for slot %s to %d\n", dev->slot_name, irq);
+
+ pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);

return irq;
}
diff -Nru a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
--- a/arch/sh/drivers/pci/pci-st40.c 2005-03-04 12:43:34 -08:00
+++ b/arch/sh/drivers/pci/pci-st40.c 2005-03-04 12:43:34 -08:00
@@ -246,7 +246,7 @@
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
- printk("PCI: IDE base address fixup for %s\n", d->slot_name);
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i=0; i<4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
diff -Nru a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
--- a/arch/sh64/kernel/pci_sh5.c 2005-03-04 12:43:34 -08:00
+++ b/arch/sh64/kernel/pci_sh5.c 2005-03-04 12:43:34 -08:00
@@ -39,7 +39,7 @@
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
- printk("PCI: IDE base address fixup for %s\n", d->slot_name);
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i=0; i<4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
diff -Nru a/arch/sh64/kernel/pcibios.c b/arch/sh64/kernel/pcibios.c
--- a/arch/sh64/kernel/pcibios.c 2005-03-04 12:43:34 -08:00
+++ b/arch/sh64/kernel/pcibios.c 2005-03-04 12:43:34 -08:00
@@ -57,7 +57,7 @@
pci_read_config_dword(dev, reg, &check);
if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", dev->slot_name, resource,
+ "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
new, check);
}
}
@@ -125,7 +125,7 @@
continue;
r = &dev->resource[idx];
if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", dev->slot_name);
+ printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
diff -Nru a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
--- a/drivers/char/agp/generic.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/char/agp/generic.c 2005-03-04 12:43:34 -08:00
@@ -611,7 +611,7 @@
printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
agp_bridge->major_version,
agp_bridge->minor_version,
- agp_bridge->dev->slot_name);
+ pci_name(agp_bridge->dev));

pci_read_config_dword(agp_bridge->dev,
agp_bridge->capndx + PCI_AGP_STATUS, &command);
diff -Nru a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
--- a/drivers/char/agp/sis-agp.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/char/agp/sis-agp.c 2005-03-04 12:43:34 -08:00
@@ -79,7 +79,7 @@
printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
agp_bridge->major_version,
agp_bridge->minor_version,
- agp_bridge->dev->slot_name);
+ pci_name(agp_bridge->dev));

pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx + PCI_AGP_STATUS, &command);
command = agp_collect_device_status(mode, command);
diff -Nru a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
--- a/drivers/ide/pci/sgiioc4.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/ide/pci/sgiioc4.c 2005-03-04 12:43:34 -08:00
@@ -688,7 +688,7 @@
if (ret < 0) {
printk(KERN_ERR
"Failed to enable device %s at slot %s\n",
- d->name, dev->slot_name);
+ d->name, pci_name(dev));
goto out;
}
pci_set_master(dev);
@@ -696,11 +696,11 @@
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
- d->name, dev->slot_name, class_rev);
+ d->name, pci_name(dev), class_rev);
if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) {
printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
"firmware is obsolete - please upgrade to revision"
- "46 or higher\n", d->name, dev->slot_name);
+ "46 or higher\n", d->name, pci_name(dev));
ret = -EAGAIN;
goto out;
}
diff -Nru a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c 2005-03-04 12:43:34 -08:00
@@ -902,7 +902,7 @@
adapter->irq = pdev->irq;

printk(KERN_INFO "hisax_fcpcipnp: found adapter %s at %s\n",
- (char *) ent->driver_data, pdev->slot_name);
+ (char *) ent->driver_data, pci_name(pdev));

retval = fcpcipnp_setup(adapter);
if (retval)
diff -Nru a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
--- a/drivers/media/common/saa7146_video.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/media/common/saa7146_video.c 2005-03-04 12:43:34 -08:00
@@ -889,7 +889,7 @@

strcpy(cap->driver, "saa7146 v4l2");
strlcpy(cap->card, dev->ext->name, sizeof(cap->card));
- sprintf(cap->bus_info,"PCI:%s",dev->pci->slot_name);
+ sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci));
cap->version = SAA7146_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VIDEO_CAPTURE |
diff -Nru a/drivers/media/video/meye.c b/drivers/media/video/meye.c
--- a/drivers/media/video/meye.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/media/video/meye.c 2005-03-04 12:43:34 -08:00
@@ -1154,7 +1154,7 @@
memset(cap, 0, sizeof(*cap));
strcpy(cap->driver, "meye");
strcpy(cap->card, "meye");
- sprintf(cap->bus_info, "PCI:%s", meye.mchip_dev->slot_name);
+ sprintf(cap->bus_info, "PCI:%s", pci_name(meye.mchip_dev));
cap->version = (MEYE_DRIVER_MAJORVERSION << 8) +
MEYE_DRIVER_MINORVERSION;
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
diff -Nru a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
--- a/drivers/media/video/zoran_driver.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/media/video/zoran_driver.c 2005-03-04 12:43:34 -08:00
@@ -2694,7 +2694,7 @@
strncpy(cap->card, ZR_DEVNAME(zr), sizeof(cap->card));
strncpy(cap->driver, "zoran", sizeof(cap->driver));
snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
- zr->pci_dev->slot_name);
+ pci_name(zr->pci_dev));
cap->version =
KERNEL_VERSION(MAJOR_VERSION, MINOR_VERSION,
RELEASE_VERSION);
diff -Nru a/drivers/net/defxx.c b/drivers/net/defxx.c
--- a/drivers/net/defxx.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/defxx.c 2005-03-04 12:43:34 -08:00
@@ -420,7 +420,7 @@
}

if (pdev != NULL)
- print_name = pdev->slot_name;
+ print_name = pci_name(pdev);

dev = alloc_fddidev(sizeof(*bp));
if (!dev) {
diff -Nru a/drivers/net/r8169.c b/drivers/net/r8169.c
--- a/drivers/net/r8169.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/r8169.c 2005-03-04 12:43:34 -08:00
@@ -1146,7 +1146,7 @@
// enable device (incl. PCI PM wakeup and hotplug setup)
rc = pci_enable_device(pdev);
if (rc) {
- printk(KERN_ERR PFX "%s: enable failure\n", pdev->slot_name);
+ printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev));
goto err_out_free_dev;
}

@@ -1184,7 +1184,7 @@
rc = pci_request_regions(pdev, MODULENAME);
if (rc) {
printk(KERN_ERR PFX "%s: could not request regions.\n",
- pdev->slot_name);
+ pci_name(pdev));
goto err_out_mwi;
}

diff -Nru a/drivers/net/s2io.c b/drivers/net/s2io.c
--- a/drivers/net/s2io.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/s2io.c 2005-03-04 12:43:34 -08:00
@@ -3192,7 +3192,7 @@
strncpy(info->version, s2io_driver_version,
sizeof(s2io_driver_version));
strncpy(info->fw_version, "", 32);
- strncpy(info->bus_info, sp->pdev->slot_name, 32);
+ strncpy(info->bus_info, pci_name(sp->pdev), 32);
info->regdump_len = XENA_REG_SPACE;
info->eedump_len = XENA_EEPROM_SPACE;
info->testinfo_len = S2IO_TEST_LEN;
diff -Nru a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c
--- a/drivers/net/sk98lin/skethtool.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/sk98lin/skethtool.c 2005-03-04 12:43:34 -08:00
@@ -257,7 +257,7 @@
strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver));
strcpy(info->version, vers);
strcpy(info->fw_version, "N/A");
- strlcpy(info->bus_info, pAC->PciDev->slot_name, ETHTOOL_BUSINFO_LEN);
+ strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN);
}

/*
diff -Nru a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
--- a/drivers/net/sk98lin/skge.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/sk98lin/skge.c 2005-03-04 12:43:34 -08:00
@@ -3058,7 +3058,7 @@
*/
* ((SK_U32 *)pMemBuf) = 0;
* ((SK_U32 *)pMemBuf + 1) = pdev->bus->number;
- * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pdev->slot_name);
+ * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev));
if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
Err = -EFAULT;
goto fault_diag;
diff -Nru a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
--- a/drivers/net/tulip/tulip.h 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/tulip/tulip.h 2005-03-04 12:43:34 -08:00
@@ -476,7 +476,7 @@

if (!i)
printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
- tp->pdev->slot_name);
+ pci_name(tp->pdev));
}
}

diff -Nru a/drivers/net/typhoon.c b/drivers/net/typhoon.c
--- a/drivers/net/typhoon.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/typhoon.c 2005-03-04 12:43:34 -08:00
@@ -2438,7 +2438,7 @@
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
printk(ERR_PFX "%s: Could not get Sleep Image version\n",
- pdev->slot_name);
+ pci_name(pdev));
goto error_out_reset;
}

diff -Nru a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
--- a/drivers/net/via-velocity.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/via-velocity.c 2005-03-04 12:43:34 -08:00
@@ -2898,7 +2898,7 @@
struct velocity_info *vptr = dev->priv;
strcpy(info->driver, VELOCITY_NAME);
strcpy(info->version, VELOCITY_VERSION);
- strcpy(info->bus_info, vptr->pdev->slot_name);
+ strcpy(info->bus_info, pci_name(vptr->pdev));
}

static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
diff -Nru a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
--- a/drivers/net/wan/wanxl.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/net/wan/wanxl.c 2005-03-04 12:43:34 -08:00
@@ -72,7 +72,7 @@
u8 irq;

u8 __iomem *plx; /* PLX PCI9060 virtual base address */
- struct pci_dev *pdev; /* for pdev->slot_name */
+ struct pci_dev *pdev; /* for pci_name(pdev) */
int rx_in;
struct sk_buff *rx_skbs[RX_QUEUE_LENGTH];
card_status_t *status; /* shared between host and card */
@@ -88,12 +88,6 @@
}


-static inline const char* card_name(struct pci_dev *pdev)
-{
- return pdev->slot_name;
-}
-
-
static inline port_status_t* get_status(port_t *port)
{
return &port->card->status->port_status[port->node];
@@ -107,7 +101,7 @@
dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
if (addr + size > 0x100000000LL)
printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory"
- " at 0x%LX!\n", card_name(pdev),
+ " at 0x%LX!\n", pci_name(pdev),
(unsigned long long)addr);
return addr;
}
@@ -201,7 +195,7 @@
desc->stat != PACKET_EMPTY) {
if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
printk(KERN_CRIT "wanXL %s: received packet for"
- " nonexistent port\n", card_name(card->pdev));
+ " nonexistent port\n", pci_name(card->pdev));
else {
struct sk_buff *skb = card->rx_skbs[card->rx_in];
port_t *port = &card->ports[desc->stat &
@@ -604,7 +598,7 @@
card = kmalloc(alloc_size, GFP_KERNEL);
if (card == NULL) {
printk(KERN_ERR "wanXL %s: unable to allocate memory\n",
- card_name(pdev));
+ pci_name(pdev));
pci_release_regions(pdev);
pci_disable_device(pdev);
return -ENOBUFS;
@@ -623,7 +617,7 @@

#ifdef DEBUG_PCI
printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
- " at 0x%LX\n", card_name(pdev),
+ " at 0x%LX\n", pci_name(pdev),
(unsigned long long)card->status_address);
#endif

@@ -649,7 +643,7 @@
while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
if (time_before(timeout, jiffies)) {
printk(KERN_WARNING "wanXL %s: timeout waiting for"
- " PUTS to complete\n", card_name(pdev));
+ " PUTS to complete\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -661,7 +655,7 @@

default:
printk(KERN_WARNING "wanXL %s: PUTS test 0x%X"
- " failed\n", card_name(pdev), stat & 0x30);
+ " failed\n", pci_name(pdev), stat & 0x30);
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -681,7 +675,7 @@
(TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
printk(KERN_WARNING "wanXL %s: no enough on-board RAM"
" (%u bytes detected, %u bytes required)\n",
- card_name(pdev), ramsize, BUFFERS_ADDR +
+ pci_name(pdev), ramsize, BUFFERS_ADDR +
(TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
wanxl_pci_remove_one(pdev);
return -ENODEV;
@@ -689,7 +683,7 @@

if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap"
- " Mode\n", card_name(pdev));
+ " Mode\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -720,7 +714,7 @@

if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n",
- card_name(pdev));
+ pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -735,7 +729,7 @@

if (!stat) {
printk(KERN_WARNING "wanXL %s: timeout while initializing card"
- "firmware\n", card_name(pdev));
+ "firmware\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENODEV;
}
@@ -745,12 +739,12 @@
#endif

printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
- card_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
+ pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);

/* Allocate IRQ */
if (request_irq(pdev->irq, wanxl_intr, SA_SHIRQ, "wanXL", card)) {
printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
- card_name(pdev), pdev->irq);
+ pci_name(pdev), pdev->irq);
wanxl_pci_remove_one(pdev);
return -EBUSY;
}
@@ -762,7 +756,7 @@
struct net_device *dev = alloc_hdlcdev(port);
if (!dev) {
printk(KERN_ERR "wanXL %s: unable to allocate"
- " memory\n", card_name(pdev));
+ " memory\n", pci_name(pdev));
wanxl_pci_remove_one(pdev);
return -ENOMEM;
}
@@ -783,7 +777,7 @@
get_status(port)->clocking = CLOCK_EXT;
if (register_hdlc_device(dev)) {
printk(KERN_ERR "wanXL %s: unable to register hdlc"
- " device\n", card_name(pdev));
+ " device\n", pci_name(pdev));
free_netdev(dev);
wanxl_pci_remove_one(pdev);
return -ENOBUFS;
@@ -791,7 +785,7 @@
card->n_ports++;
}

- printk(KERN_INFO "wanXL %s: port", card_name(pdev));
+ printk(KERN_INFO "wanXL %s: port", pci_name(pdev));
for (i = 0; i < ports; i++)
printk("%s #%i: %s", i ? "," : "", i,
card->ports[i].dev->name);
diff -Nru a/drivers/parisc/dino.c b/drivers/parisc/dino.c
--- a/drivers/parisc/dino.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/parisc/dino.c 2005-03-04 12:43:34 -08:00
@@ -653,14 +653,13 @@
PCI_INTERRUPT_PIN, 1, &irq_pin);
irq_pin = (irq_pin + PCI_SLOT(dev->devfn) - 1) % 4 ;
printk(KERN_WARNING "Device %s has undefined IRQ, "
- "setting to %d\n", dev->slot_name,
- irq_pin);
+ "setting to %d\n", pci_name(dev), irq_pin);
dino_cfg_write(dev->bus, dev->devfn,
PCI_INTERRUPT_LINE, 1, irq_pin);
dino_assign_irq(dino_dev, irq_pin, &dev->irq);
#else
dev->irq = 65535;
- printk(KERN_WARNING "Device %s has unassigned IRQ\n", dev->slot_name);
+ printk(KERN_WARNING "Device %s has unassigned IRQ\n", pci_name(dev));
#endif
} else {

diff -Nru a/drivers/pci/pci.c b/drivers/pci/pci.c
--- a/drivers/pci/pci.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/pci/pci.c 2005-03-04 12:43:34 -08:00
@@ -271,7 +271,7 @@
if ((pmc & PCI_PM_CAP_VER_MASK) != 2) {
printk(KERN_DEBUG
"PCI: %s has unsupported PM cap regs version (%u)\n",
- dev->slot_name, pmc & PCI_PM_CAP_VER_MASK);
+ pci_name(dev), pmc & PCI_PM_CAP_VER_MASK);
return -EIO;
}

diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/pci/probe.c 2005-03-04 12:43:34 -08:00
@@ -549,7 +549,6 @@
{
u32 class;

- dev->slot_name = dev->dev.bus_id;
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));

diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
--- a/drivers/pci/setup-res.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/pci/setup-res.c 2005-03-04 12:43:34 -08:00
@@ -86,7 +86,7 @@
}
res->flags &= ~IORESOURCE_UNSET;
DBGC((KERN_INFO "PCI: moved device %s resource %d (%lx) to %x\n",
- dev->slot_name, resno, res->flags,
+ pci_name(dev), resno, res->flags,
new & ~PCI_REGION_FLAG_MASK));
}

diff -Nru a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
--- a/drivers/pcmcia/yenta_socket.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/pcmcia/yenta_socket.c 2005-03-04 12:43:34 -08:00
@@ -963,7 +963,7 @@
* the irq stuff...
*/
printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
- dev->slot_name, dev->subsystem_vendor, dev->subsystem_device);
+ pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);

yenta_config_init(socket);

diff -Nru a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
--- a/drivers/scsi/qla2xxx/qla_os.c 2005-03-04 12:43:34 -08:00
+++ b/drivers/scsi/qla2xxx/qla_os.c 2005-03-04 12:43:34 -08:00
@@ -1847,13 +1847,13 @@
if (pio_len < MIN_IOBASE_LEN) {
qla_printk(KERN_WARNING, ha,
"Invalid PCI I/O region size (%s)...\n",
- ha->pdev->slot_name);
+ pci_name(ha->pdev));
pio = 0;
}
} else {
qla_printk(KERN_WARNING, ha,
"region #0 not a PIO resource (%s)...\n",
- ha->pdev->slot_name);
+ pci_name(ha->pdev));
pio = 0;
}

@@ -1865,20 +1865,20 @@
if (!(mmio_flags & IORESOURCE_MEM)) {
qla_printk(KERN_ERR, ha,
"region #0 not an MMIO resource (%s), aborting\n",
- ha->pdev->slot_name);
+ pci_name(ha->pdev));
goto iospace_error_exit;
}
if (mmio_len < MIN_IOBASE_LEN) {
qla_printk(KERN_ERR, ha,
"Invalid PCI mem region size (%s), aborting\n",
- ha->pdev->slot_name);
+ pci_name(ha->pdev));
goto iospace_error_exit;
}

if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) {
qla_printk(KERN_WARNING, ha,
- "Failed to reserve PIO/MMIO regions (%s)\n",
- ha->pdev->slot_name);
+ "Failed to reserve PIO/MMIO regions (%s)\n",
+ pci_name(ha->pdev));

goto iospace_error_exit;
}
@@ -1888,7 +1888,7 @@
ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
if (!ha->iobase) {
qla_printk(KERN_ERR, ha,
- "cannot remap MMIO (%s), aborting\n", ha->pdev->slot_name);
+ "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));

goto iospace_error_exit;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.135 / U:0.356 seconds]
©2003-2014 Jasper Spaans. hosted at Digital Ocean