lkml.org 
[lkml]   [2005]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH][25/26] IB/mthca: implement query of device caps
Date
From
From: Michael S. Tsirkin <mst@mellanox.co.il>

Set device_cap_flags field in mthca's query_device method.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>


--- linux-export.orig/drivers/infiniband/hw/mthca/mthca_cmd.h 2005-01-25 20:48:02.000000000 -0800
+++ linux-export/drivers/infiniband/hw/mthca/mthca_cmd.h 2005-03-03 14:13:03.934043620 -0800
@@ -95,7 +95,21 @@
};

enum {
- DEV_LIM_FLAG_SRQ = 1 << 6
+ DEV_LIM_FLAG_RC = 1 << 0,
+ DEV_LIM_FLAG_UC = 1 << 1,
+ DEV_LIM_FLAG_UD = 1 << 2,
+ DEV_LIM_FLAG_RD = 1 << 3,
+ DEV_LIM_FLAG_RAW_IPV6 = 1 << 4,
+ DEV_LIM_FLAG_RAW_ETHER = 1 << 5,
+ DEV_LIM_FLAG_SRQ = 1 << 6,
+ DEV_LIM_FLAG_BAD_PKEY_CNTR = 1 << 8,
+ DEV_LIM_FLAG_BAD_QKEY_CNTR = 1 << 9,
+ DEV_LIM_FLAG_MW = 1 << 16,
+ DEV_LIM_FLAG_AUTO_PATH_MIG = 1 << 17,
+ DEV_LIM_FLAG_ATOMIC = 1 << 18,
+ DEV_LIM_FLAG_RAW_MULTI = 1 << 19,
+ DEV_LIM_FLAG_UD_AV_PORT_ENFORCE = 1 << 20,
+ DEV_LIM_FLAG_UD_MULTI = 1 << 21,
};

struct mthca_dev_lim {
--- linux-export.orig/drivers/infiniband/hw/mthca/mthca_dev.h 2005-03-03 14:13:03.005245231 -0800
+++ linux-export/drivers/infiniband/hw/mthca/mthca_dev.h 2005-03-03 14:13:03.932044054 -0800
@@ -218,6 +218,7 @@

int hca_type;
unsigned long mthca_flags;
+ unsigned long device_cap_flags;

u32 rev_id;

--- linux-export.orig/drivers/infiniband/hw/mthca/mthca_main.c 2005-03-03 14:13:03.005245231 -0800
+++ linux-export/drivers/infiniband/hw/mthca/mthca_main.c 2005-03-03 14:13:03.933043837 -0800
@@ -171,6 +171,33 @@
mdev->limits.reserved_uars = dev_lim->reserved_uars;
mdev->limits.reserved_pds = dev_lim->reserved_pds;

+ /* IB_DEVICE_RESIZE_MAX_WR not supported by driver.
+ May be doable since hardware supports it for SRQ.
+
+ IB_DEVICE_N_NOTIFY_CQ is supported by hardware but not by driver.
+
+ IB_DEVICE_SRQ_RESIZE is supported by hardware but SRQ is not
+ supported by driver. */
+ mdev->device_cap_flags = IB_DEVICE_CHANGE_PHY_PORT |
+ IB_DEVICE_PORT_ACTIVE_EVENT |
+ IB_DEVICE_SYS_IMAGE_GUID |
+ IB_DEVICE_RC_RNR_NAK_GEN;
+
+ if (dev_lim->flags & DEV_LIM_FLAG_BAD_PKEY_CNTR)
+ mdev->device_cap_flags |= IB_DEVICE_BAD_PKEY_CNTR;
+
+ if (dev_lim->flags & DEV_LIM_FLAG_BAD_QKEY_CNTR)
+ mdev->device_cap_flags |= IB_DEVICE_BAD_QKEY_CNTR;
+
+ if (dev_lim->flags & DEV_LIM_FLAG_RAW_MULTI)
+ mdev->device_cap_flags |= IB_DEVICE_RAW_MULTI;
+
+ if (dev_lim->flags & DEV_LIM_FLAG_AUTO_PATH_MIG)
+ mdev->device_cap_flags |= IB_DEVICE_AUTO_PATH_MIG;
+
+ if (dev_lim->flags & DEV_LIM_FLAG_UD_AV_PORT_ENFORCE)
+ mdev->device_cap_flags |= IB_DEVICE_UD_AV_PORT_ENFORCE;
+
if (dev_lim->flags & DEV_LIM_FLAG_SRQ)
mdev->mthca_flags |= MTHCA_FLAG_SRQ;

--- linux-export.orig/drivers/infiniband/hw/mthca/mthca_provider.c 2005-03-03 14:13:02.566340502 -0800
+++ linux-export/drivers/infiniband/hw/mthca/mthca_provider.c 2005-03-03 14:13:03.933043837 -0800
@@ -43,6 +43,8 @@
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int err = -ENOMEM;
+ struct mthca_dev* mdev = to_mdev(ibdev);
+
u8 status;

in_mad = kmalloc(sizeof *in_mad, GFP_KERNEL);
@@ -50,7 +52,7 @@
if (!in_mad || !out_mad)
goto out;

- props->fw_ver = to_mdev(ibdev)->fw_ver;
+ props->fw_ver = mdev->fw_ver;

memset(in_mad, 0, sizeof *in_mad);
in_mad->base_version = 1;
@@ -59,7 +61,7 @@
in_mad->method = IB_MGMT_METHOD_GET;
in_mad->attr_id = IB_SMP_ATTR_NODE_INFO;

- err = mthca_MAD_IFC(to_mdev(ibdev), 1, 1,
+ err = mthca_MAD_IFC(mdev, 1, 1,
1, NULL, NULL, in_mad, out_mad,
&status);
if (err)
@@ -69,10 +71,11 @@
goto out;
}

- props->vendor_id = be32_to_cpup((u32 *) (out_mad->data + 36)) &
+ props->device_cap_flags = mdev->device_cap_flags;
+ props->vendor_id = be32_to_cpup((u32 *) (out_mad->data + 36)) &
0xffffff;
- props->vendor_part_id = be16_to_cpup((u16 *) (out_mad->data + 30));
- props->hw_ver = be16_to_cpup((u16 *) (out_mad->data + 32));
+ props->vendor_part_id = be16_to_cpup((u16 *) (out_mad->data + 30));
+ props->hw_ver = be16_to_cpup((u16 *) (out_mad->data + 32));
memcpy(&props->sys_image_guid, out_mad->data + 4, 8);
memcpy(&props->node_guid, out_mad->data + 12, 8);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.072 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site