lkml.org 
[lkml]   [2005]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.6.12-rc1-mm[1-3]: ACPI battery monitor does not work
Date
Hi,

There is a problem on my box (Asus L5D, x86-64 kernel) with the ACPI battery
driver in the 2.6.12-rc1-mm[1-3] kernels. Namely, the battery monitor that
I use (the kpowersave applet from SUSE 9.2) is no longer able to report the
battery status (ie how much % it is loaded). It can only check if the AC power
is connected (if it is connected, kpowersave behaves as though there was
no battery in the box, and if it is not connected, kpowersave always shows
that the battery is 1% loaded).

Also, there are big latencies on loading and accessing the battery module, but
the module loads successfully and there's nothing suspicious in dmesg.

Please let me know if you need any additional information.

Greets,
Rafael


--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-04-06 13:31    [W:0.059 / U:11.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site