[lkml]   [2005]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: upgrading modutils may have fixed: unresolved symbols still in 2.4.30-rc2 (usbserial needs symbol tty_ldisc_ref and tty_ldisc_deref which are EXPORT_SYMBOL_GPL)
On Sat, Mar 26, 2005 at 04:31:59PM -0800, David Dyck wrote:
> >dd:linux# insmod usbserial
> >Using /lib/modules/2.4.30-rc2/kernel/drivers/usb/serial/usbserial.o
> >...: unresolved symbol tty_ldisc_ref
> >...: unresolved symbol tty_ldisc_deref
> I tried again with 2.4.30-rc3, but this time I changed my .config
> file to disable 2 other modules that I didn't need, and wasn't loading.
> and build rc3. It seems to work, so either my earlier
> rc2 test with make clean wasn't clean-enough, or CONFIG_USB_UHCI_ALT
> interferes - testing with CONFIG_USB_UHCI_ALT as a module (not loaded)
> also works, so since interdiff didn't seem to highlite any difference
> between rc2 and rc3, I'll suspect that my test make clean didn't
> clean things up good enough, and the entire problem was as
> Adrian Bunk suggest (upgrade modutils, thanks Adrian)

I believe it's because of genksyms during the build process, I had the
exact same problem a few weeks ago on a machine with old modutils. So
you should have cleaned everything and rebuilt from scratch after
installing your new modutils. BTW, the required modutils in
Documentation/Changes is still marked as 2.4.10, I hope it is still


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-04-06 13:31    [W:0.044 / U:12.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site