lkml.org 
[lkml]   [2005]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [PATCH][trivial] fix tiny spelling error in init/Kconfig and write "so-called" instead of "so called" and "socalled" everywhere.
    On Fri, 25 Mar 2005, Randy.Dunlap wrote:

    > Jesper Juhl wrote:
    > > Fix spelling in init/Kconfig
    > >
    > > Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
    > >
    > > --- linux-2.6.12-rc1-mm3-orig/init/Kconfig 2005-03-25 15:29:08.000000000
    > > +0100
    > > +++ linux-2.6.12-rc1-mm3/init/Kconfig 2005-03-26 02:24:33.000000000 +0100
    > > @@ -83,7 +83,7 @@
    > > default y
    > > help
    > > This option allows you to choose whether you want to have support
    > > - for socalled swap devices or swap files in your kernel that are
    > > + for so called swap devices or swap files in your kernel that are
    > > used to provide more virtual memory than the actual RAM present
    > > in your computer. If unsure say Y.
    >
    > I would prefer (and write) "so-called".
    >
    I believe both "so called" and "so-called" are valid, but "so-called"
    seems to be more common in the Kconfig files already. So let's be
    consistent about it.


    Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>

    --- linux-2.6.12-rc1-mm3-orig/init/Kconfig 2005-03-25 15:29:08.000000000 +0100
    +++ linux-2.6.12-rc1-mm3/init/Kconfig 2005-03-26 11:36:36.000000000 +0100
    @@ -83,7 +83,7 @@ config SWAP
    default y
    help
    This option allows you to choose whether you want to have support
    - for socalled swap devices or swap files in your kernel that are
    + for so-called swap devices or swap files in your kernel that are
    used to provide more virtual memory than the actual RAM present
    in your computer. If unsure say Y.

    --- linux-2.6.12-rc1-mm3-orig/arch/cris/arch-v10/drivers/Kconfig 2005-03-02 08:37:50.000000000 +0100
    +++ linux-2.6.12-rc1-mm3/arch/cris/arch-v10/drivers/Kconfig 2005-03-26 11:35:56.000000000 +0100
    @@ -836,7 +836,7 @@ config ETRAX_PA_BUTTON_BITMASK
    help
    This is a bitmask with information about what bits on PA that
    are used for buttons.
    - Most products has a so called TEST button on PA1, if that's true
    + Most products has a so-called TEST button on PA1, if that's true
    use 02 here.
    Use 00 if there are no buttons on PA.
    If the bitmask is <> 00 a button driver will be included in the gpio
    --- linux-2.6.12-rc1-mm3-orig/drivers/net/wireless/hostap/Kconfig 2005-03-25 15:28:57.000000000 +0100
    +++ linux-2.6.12-rc1-mm3/drivers/net/wireless/hostap/Kconfig 2005-03-26 11:37:15.000000000 +0100
    @@ -3,7 +3,7 @@ config HOSTAP
    depends on NET_RADIO
    ---help---
    Shared driver code for IEEE 802.11b wireless cards based on
    - Intersil Prism2/2.5/3 chipset. This driver supports so called
    + Intersil Prism2/2.5/3 chipset. This driver supports so-called
    Host AP mode that allows the card to act as an IEEE 802.11
    access point.

    --- linux-2.6.12-rc1-mm3-orig/drivers/mtd/chips/Kconfig 2005-03-25 15:28:49.000000000 +0100
    +++ linux-2.6.12-rc1-mm3/drivers/mtd/chips/Kconfig 2005-03-26 11:37:26.000000000 +0100
    @@ -160,7 +160,7 @@ config MTD_OTP
    depends on MTD_CFI_ADV_OPTIONS
    default n
    help
    - This enables support for reading, writing and locking so called
    + This enables support for reading, writing and locking so-called
    "Protection Registers" present on some flash chips.
    A subset of them are pre-programmed at the factory with a
    unique set of values. The rest is user-programmable.
    --- linux-2.6.12-rc1-mm3-orig/drivers/media/dvb/ttpci/Kconfig 2005-03-25 15:28:49.000000000 +0100
    +++ linux-2.6.12-rc1-mm3/drivers/media/dvb/ttpci/Kconfig 2005-03-26 11:38:16.000000000 +0100
    @@ -68,7 +68,7 @@ config DVB_BUDGET
    select DVB_TDA10021
    help
    Support for simple SAA7146 based DVB cards
    - (so called Budget- or Nova-PCI cards) without onboard
    + (so-called Budget- or Nova-PCI cards) without onboard
    MPEG2 decoder.

    Say Y if you own such a card and want to use it.
    @@ -84,7 +84,7 @@ config DVB_BUDGET_CI
    select DVB_TDA1004X
    help
    Support for simple SAA7146 based DVB cards
    - (so called Budget- or Nova-PCI cards) without onboard
    + (so-called Budget- or Nova-PCI cards) without onboard
    MPEG2 decoder, but with onboard Common Interface connector.

    Note: The Common Interface is not yet supported by this driver
    @@ -103,7 +103,7 @@ config DVB_BUDGET_AV
    select DVB_STV0299
    help
    Support for simple SAA7146 based DVB cards
    - (so called Budget- or Nova-PCI cards) without onboard
    + (so-called Budget- or Nova-PCI cards) without onboard
    MPEG2 decoder, but with one or more analog video inputs.

    Say Y if you own such a card and want to use it.
    --- linux-2.6.12-rc1-mm3-orig/drivers/crypto/Kconfig 2005-03-02 08:37:45.000000000 +0100
    +++ linux-2.6.12-rc1-mm3/drivers/crypto/Kconfig 2005-03-26 11:38:24.000000000 +0100
    @@ -5,7 +5,7 @@ config CRYPTO_DEV_PADLOCK
    depends on CRYPTO && X86 && !X86_64
    help
    Some VIA processors come with an integrated crypto engine
    - (so called VIA PadLock ACE, Advanced Cryptography Engine)
    + (so-called VIA PadLock ACE, Advanced Cryptography Engine)
    that provides instructions for very fast {en,de}cryption
    with some algorithms.


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-04-06 13:30    [W:0.030 / U:0.028 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site