lkml.org 
[lkml]   [2005]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [ACPI] Re: Fw: Anybody? 2.6.11 (stable and -rc) ACPI breaks USB
From
> On Wed, 2005-03-23 at 04:57, Bjorn Helgaas wrote:
>> Great. Shaohua, where should we go from here? Do you have more
>> concerns with the current patch, or should we ask Andrew to put it
>> in -mm? If you do have concerns, would you like to propose an
>> alternate patch that fixes the problem for Grzegorz?
> No, the patch is great to me.

Good. Thanks for all the help in refining this!
Andrew, can we put this in -mm?

BTW, I also have a report that this fixes a problem like
the following. I've had several similar reports that initially
seemed to be related to "pci=routeirq", so I'm optimistic that
fixing this Via problem will help several folks.

Probing IDE interface ide2...
hde: _NEC DV-5700A, ATAPI CD/DVD-ROM drive
irq 11: nobody cared!
[<c013769a>] __report_bad_irq+0x2a/0x90
[<c0136f99>] handle_IRQ_event+0x39/0x70
[<c01377c3>] note_interrupt+0xa3/0xd0
[<c0137130>] __do_IRQ+0x160/0x180
[<c0105649>] do_IRQ+0x19/0x30
[<c0103b4e>] common_interrupt+0x1a/0x20
[<c011eb00>] __do_softirq+0x30/0x90
[<c011eb86>] do_softirq+0x26/0x30
[<c0136f55>] irq_exit+0x35/0x40
[<c010564e>] do_IRQ+0x1e/0x30
[<c0103b4e>] common_interrupt+0x1a/0x20
[<c0137243>] enable_irq+0x43/0x110
[<c023adc9>] ide_config_drive_speed+0x149/0x380
[<c022ff38>] hpt370_tune_chipset+0x158/0x160
[<c02303dc>] hpt366_config_drive_xfer_rate+0x3c/0xa0
[<c023d310>] probe_hwif+0x420/0x490
[<c023d39b>] probe_hwif_init_with_fixup+0x1b/0x70
[<c0240a6b>] ide_setup_pci_device+0x5b/0xa0
[<c0231dbe>] init_setup_hpt366+0x17e/0x1b0
[<c0231e18>] hpt366_init_one+0x28/0x30
[<c039ccad>] ide_scan_pcidev+0x4d/0x70
[<c039ccf8>] ide_scan_pcibus+0x28/0xc0
[<c039cbd0>] probe_for_hwifs+0x10/0x20
[<c039cc3e>] ide_init+0x5e/0x80
[<c03808b3>] do_initcalls+0x53/0xc0
[<c0100410>] init+0x0/0x120
[<c010043f>] init+0x2f/0x120
[<c01012c0>] kernel_thread_helper+0x0/0x10
[<c01012c5>] kernel_thread_helper+0x5/0x10
handlers:
[<c01df538>] (acpi_irq+0x0/0x16)
Disabling IRQ #11
On Fri, 2005-03-18 at 11:07 -0700, Bjorn Helgaas wrote:
> OK. Try this one for size. It differs from what's currently in
> the tree in these ways:
>
> - It's a quirk, so we don't have to clutter acpi_pci_irq_enable()
> and pirq_enable_irq() with Via-specific code.
>
> - It doesn't do anything unless we're in PIC mode. The comment
> suggests this issue only affects PIC routing.
>
> - We do this for ALL Via devices. The current code in the tree
> does it for all devices in the system IF there is a Via device
> with devfn==0, which misses Grzegorz's case.
>
> Does anybody have a pointer to a spec that talks about this? It'd
> be awfully nice to have a reference.
>
> Grzegorz, can you check to make sure this still works after all the
> tweaking?

Oops, I had the sense of the skip_ioapic_setup test reversed. Corrected
patch follows.

===== arch/i386/pci/irq.c 1.55 vs edited =====
--- 1.55/arch/i386/pci/irq.c 2005-02-07 22:39:15 -07:00
+++ edited/arch/i386/pci/irq.c 2005-03-15 10:11:44 -07:00
@@ -1026,7 +1026,6 @@
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- extern int via_interrupt_line_quirk;
struct pci_dev *temp_dev;

pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
@@ -1081,10 +1080,6 @@
printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
'A' + pin, pci_name(dev), msg);
}
- /* VIA bridges use interrupt line for apic/pci steering across
- the V-Link */
- else if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
return 0;
}

===== drivers/acpi/pci_irq.c 1.37 vs edited =====
--- 1.37/drivers/acpi/pci_irq.c 2005-03-01 09:57:29 -07:00
+++ edited/drivers/acpi/pci_irq.c 2005-03-15 10:10:57 -07:00
@@ -388,7 +388,6 @@
u8 pin = 0;
int edge_level = ACPI_LEVEL_SENSITIVE;
int active_high_low = ACPI_ACTIVE_LOW;
- extern int via_interrupt_line_quirk;

ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");

@@ -437,9 +436,6 @@
return_VALUE(0);
}
}
-
- if (via_interrupt_line_quirk)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15);

dev->irq = acpi_register_gsi(irq, edge_level, active_high_low);

===== drivers/pci/quirks.c 1.72 vs edited =====
--- 1.72/drivers/pci/quirks.c 2005-03-10 01:38:25 -07:00
+++ edited/drivers/pci/quirks.c 2005-03-21 09:22:23 -07:00
@@ -683,19 +683,40 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );

-/*
- * VIA northbridges care about PCI_INTERRUPT_LINE
- */
-int via_interrupt_line_quirk;
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif

-static void __devinit quirk_via_bridge(struct pci_dev *pdev)
+static void __devinit quirk_via_irqpic(struct pci_dev *dev)
{
- if(pdev->devfn == 0) {
- printk(KERN_INFO "PCI: Via IRQ fixup\n");
- via_interrupt_line_quirk = 1;
+ u8 irq, new_irq;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (!skip_ioapic_setup)
+ return;
+#endif
+#ifdef CONFIG_ACPI
+ if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
+ return;
+#endif
+ /*
+ * Some Via devices make an internal connection to the PIC when the
+ * PCI_INTERRUPT_LINE register is written. If we've changed the
+ * device's IRQ, we need to update this routing.
+ *
+ * I suspect this only happens for devices on the same chip as the
+ * PIC, but I don't know how to identify those without listing them
+ * all individually, which is a maintenance problem.
+ */
+ new_irq = dev->irq & 0xf;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+ pci_name(dev), irq, new_irq);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge );
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);

/*
* Serverworks CSB5 IDE does not fully support native mode
\
 
 \ /
  Last update: 2005-04-06 13:30    [W:0.138 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site