lkml.org 
[lkml]   [2005]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: SCSI Target Mode issue...... pls help
Check SCSI target mid-level (SCST) with Qlogic target driver on 
http://scst.sourceforge.net.

Best regards,
Vlad

Nauman wrote:
> hello all the gurus out there,
> i have written simple Target for SCSI device. its in very early stage.
> I started to handle simple commands from the INITIATOR like INQUIRY,
> READ CAPACITY , REPORT LUN.
> Now i am upto READ and WRITE. I have responded READ properly. Problem
> is in WRITE command. For instance there is a case when i get multiple
> WRITE command from INITIATOR
> i queue command as i receive it. CTIO has to be sent to firmware for
> each recieved command . in my case i send CTIO as i recieve the
> command. now firmware has to send back the response for each CTIO i
> sent. here is whats happening
> i get 2 commands for WRITE. send CTIO for cmd1 and cmd2 and what i get
> back from firmware is response of second cmd which is cmd2. cmd1's
> command time out occurs and it fails to respond.
>
> if any one has done basic handshake and handled READ and WRITE for
> TARGET mode then please share ur knowledge......
> Best Regards,

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.027 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site