lkml.org 
[lkml]   [2005]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [ACPI] Re: Fw: Anybody? 2.6.11 (stable and -rc) ACPI breaks USB
    On Fri, 11 Mar 2005, Bjorn Helgaas wrote:

    > Can you do an "lspci -vvn"?

    # lspci -vvn
    0000:00:00.0 Class 0600: 1022:700e (rev 13)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 32
    Region 0: Memory at f0000000 (32-bit, prefetchable)
    Region 1: Memory at f7003000 (32-bit, prefetchable) [size=4K]
    Region 2: I/O ports at c000 [disabled] [size=4]
    Capabilities: [a0] AGP version 2.0
    Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
    HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
    Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+
    Rate=x4

    0000:00:01.0 Class 0604: 1022:700f
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    Memory behind bridge: f4000000-f5ffffff
    Prefetchable memory behind bridge: e8000000-efffffff
    BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

    0000:00:07.0 Class 0601: 1106:0686 (rev 40)
    Subsystem: 147b:a702
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:07.1 Class 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP
    PriP])
    Subsystem: 1106:0571
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Region 4: I/O ports at c400 [size=16]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:07.2 Class 0c03: 1106:3038 (rev 1a)
    Subsystem: 0925:1234
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, cache line size 08
    Interrupt: pin D routed to IRQ 9
    Region 4: I/O ports at c800 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:07.3 Class 0c03: 1106:3038 (rev 1a)
    Subsystem: 0925:1234
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, cache line size 08
    Interrupt: pin D routed to IRQ 9
    Region 4: I/O ports at cc00 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:07.4 Class 0c05: 1106:3057 (rev 40)
    Subsystem: 1106:3057
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin ? routed to IRQ 11
    Capabilities: [68] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:09.0 Class 0400: 109e:036e (rev 11)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR+
    Latency: 32 (4000ns min, 10000ns max)
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at f7000000 (32-bit, prefetchable)
    Capabilities: [44] Vital Product Data
    Capabilities: [4c] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:09.1 Class 0480: 109e:0878 (rev 11)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR+
    Latency: 32 (1000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at f7001000 (32-bit, prefetchable)
    Capabilities: [44] Vital Product Data
    Capabilities: [4c] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:0b.0 Class 0401: 1102:0002 (rev 08)
    Subsystem: 1102:8064
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (500ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 9
    Region 0: I/O ports at d000
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:0b.1 Class 0980: 1102:7002 (rev 08)
    Subsystem: 1102:0020
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Region 0: I/O ports at d400
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:00:0d.0 Class 0180: 1095:3112 (rev 02)
    Subsystem: 1095:3112
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR+
    Latency: 32, cache line size 08
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at d800
    Region 1: I/O ports at dc00 [size=4]
    Region 2: I/O ports at e000 [size=8]
    Region 3: I/O ports at e400 [size=4]
    Region 4: I/O ports at e800 [size=16]
    Region 5: Memory at f7002000 (32-bit, non-prefetchable) [size=512]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    0000:00:0f.0 Class 0200: 10ec:8139 (rev 10)
    Subsystem: 10ec:8139
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR+
    Latency: 32 (8000ns min, 16000ns max)
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at ec00
    Region 1: Memory at f7004000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    0000:01:05.0 Class 0300: 10de:0150 (rev a4)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 248 (1250ns min, 250ns max)
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at f4000000 (32-bit, non-prefetchable)
    Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
    Capabilities: [60] Power Management version 1
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [44] AGP version 2.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
    HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
    Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+
    Rate=x4

    What do you think about this?

    I will try new patch in the morning.


    Thanks,

    Grzegorz Kulewski
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:11    [W:0.037 / U:0.108 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site