lkml.org 
[lkml]   [2005]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: kernel BUG at drivers/serial/8250.c:1256!
On Tue, Mar 01, 2005 at 11:37:20PM +0000, Russell King wrote:
> On Wed, Mar 02, 2005 at 12:09:46AM +0100, Karol Kozimor wrote:
> > I've finally got around to test latest kernels and managed to find a bug in
> > the serial subsystem, which happens during suspend.
>
> Yes, serial_cs is claiming that we don't have a device associated with
> the port, so we're treating it as a legacy port. However, serial_cs is
> implementing the suspend/resume methods. This is wrong, since that
> means the port will be suspended twice, and hence causes this bug.

Ok, here's the patch. Please test and let me know if it resolves your
problem. Thanks.

diff -up -x BitKeeper -x ChangeSet -x SCCS -x _xlk -x *.orig -x *.rej orig/drivers/serial/serial_cs.c linux/drivers/serial/serial_cs.c
--- orig/drivers/serial/serial_cs.c Sun Feb 6 11:38:41 2005
+++ linux/drivers/serial/serial_cs.c Sat Mar 5 14:09:53 2005
@@ -289,7 +289,8 @@ static void serial_detach(dev_link_t * l

/*====================================================================*/

-static int setup_serial(struct serial_info * info, kio_addr_t iobase, int irq)
+static int setup_serial(client_handle_t handle, struct serial_info * info,
+ kio_addr_t iobase, int irq)
{
struct uart_port port;
int line;
@@ -299,6 +300,7 @@ static int setup_serial(struct serial_in
port.irq = irq;
port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
port.uartclk = 1843200;
+ port.dev = &handle_to_dev(handle);
if (buggy_uart)
port.flags |= UPF_BUGGY_UART;
line = serial8250_register_port(&port);
@@ -376,7 +378,7 @@ static int simple_config(dev_link_t *lin
info->slave = 1;
}
if (info->slave)
- return setup_serial(info, port, config.AssignedIRQ);
+ return setup_serial(handle, info, port, config.AssignedIRQ);
}
link->conf.Vcc = config.Vcc;

@@ -451,7 +453,7 @@ next_entry:
return -1;
}

- return setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
+ return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
}

static int multi_config(dev_link_t * link)
@@ -546,21 +548,21 @@ static int multi_config(dev_link_t * lin
8 registers are for the UART, the others are extra registers */
if (info->manfid == MANFID_OXSEMI) {
if (cf->index == 1 || cf->index == 3) {
- setup_serial(info, base2, link->irq.AssignedIRQ);
+ setup_serial(handle, info, base2, link->irq.AssignedIRQ);
outb(12, link->io.BasePort1 + 1);
} else {
- setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
+ setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
outb(12, base2 + 1);
}
return 0;
}

- setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
+ setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
/* The Nokia cards are not really multiport cards */
if (info->manfid == MANFID_NOKIA)
return 0;
for (i = 0; i < info->multi - 1; i++)
- setup_serial(info, base2 + (8 * i), link->irq.AssignedIRQ);
+ setup_serial(handle, info, base2 + (8 * i), link->irq.AssignedIRQ);

return 0;
}

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:11    [W:0.046 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site