lkml.org 
[lkml]   [2005]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.11-rc5
    Mws wrote:

    >hi benjamin
    >
    >now i had some spare time to do some investigation
    >
    >booting the 2.6.11-rc5 with radeonfb.default_dynclk=0 or with -1
    >brings up a framebuffer console. everything is fine.
    >starting xorg-x11 with Ati binary only drivers just brings up a black screen
    >without a mouse cursor and freezes the hole machine. even network ect.
    >is no more reachable from outside the machine. worst thing out of that
    >a tail on the log files (on another machine) does immediately stop - also no
    >output is written to syslog :/
    >
    >next scenario - test 2.6.11-rc5 with radeonfb.default_dynclock=0 and -1
    >starting xorg-x11 with Xorg Radeon driver.
    >a grey screen comes up - mouse cursor is visible and also able to move for
    >5 - 8 seconds after screen display - then freezes the whole machine again.
    >
    >
    Did you try without dri? (Comment out dri in the X config file)
    I use a radeon 7000 VE at work, where X will hang after a few
    seconds if dri is enabled in X. Disable dri, and it is
    rock solid. xfree or x.org makes no difference here.

    Helge Hafting

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:10    [W:4.311 / U:0.608 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site