Messages in this thread | | | Date | Sun, 6 Feb 2005 15:38:30 +0100 (CET) | From | Marco Rogantini <> | Subject | Re: rtl8139 (8139too) net problem in linux 2.6.10 |
| |
Hello!
On Sun, 6 Feb 2005, OGAWA Hirofumi wrote:
> OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> writes: > >> Umm... Bit strange... >> >> I couldn't find the PCI4510 in yenta_table. Did you add the PCI4510 to >> yenta_table? Could you send "lspci -n" (what vendor-id and device-id)?
0000:02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02) 0000:02:01.0 0607: 104c:ac44 (rev 02) > > Grr... Ok, probably that was processed as default bridge. > > Could you please try the following patch for debug?
> +#define PCI_DEVICE_ID_TI_4510 0xac44 > + CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4510, TI12XX),
:-) It solved the problem! However I still must use the 'disable_clkrun' parameter to get the bridge working correctly.
Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Enabling device 0000:02:01.0 (0000 -> 0002) ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:01.0 [1028:013e] Yenta: Disabling CLKRUN feature Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64 Yenta: ISA IRQ mask 0x04d8, PCI irq 11 Socket status: 30000020
Many, many thanks for your help, you made me a happy man!
-marco - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |