lkml.org 
[lkml]   [2005]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: bad pmd filemap.c, oops; 2.4.30 and 2.4.32
On Wed, Dec 28, 2005 at 06:52:06PM -0800, Chris Stromsoe wrote:
> On Tue, 27 Dec 2005, Marcelo Tosatti wrote:
> >On Tue, Dec 27, 2005 at 08:58:39AM -0800, Chris Stromsoe wrote:
> >>
> >>filemap.c:2234: bad pmd 00c001e3.
> >>filemap.c:2234: bad pmd 010001e3.
> >
> >This is usually due to memory corruption. Please verify it with
> >memtest86.
>
> I've run through three complete memtest86 passes so far with no errors.
> I'll keep running, but I'm not expecting to see anything.
>
> I caught another two bad pmd errors followed by an oops this morning.
> This is with 2.4.32, bond/tg3 loaded as modules. Full .config available.
>

I have some servers running on tg3+bond with up to 70 Mbps with about one
year of uptime. Ok, they're not on 2.4.32 yet, but that's just to say that
I dont suspect those drivers.

> -Chris
>
> Dec 27 09:28:19 filemap.c:2234: bad pmd 020001e3.
> Dec 27 09:28:19 filemap.c:2234: bad pmd 024001e3.
>
> The oops came in ata 09:28:20
>
> ksymoops 2.4.9 on i686 2.4.32. Options used
> -V (default)
> -k /proc/ksyms (default)
> -l /proc/modules (default)
> -o /lib/modules/2.4.32/ (default)
> -m /boot/System.map-2.4.32 (specified)
>
> Unable to handle kernel paging request at virtual address c22eee80
> c0259bb3
> *pde = 020001e3
> Oops: 0002
> CPU: 2
^^^^^
interesting, this machine is SMP.
memtest86 only involves CPU0 in tests. I've already had a great difficulty
trying to detect memory problems which occured only when more than one CPU
was accessing the RAM. Can your machine support its load with only one CPU ?
Maybe you observe more I/O than pure CPU. It would be interesting to restart
it with the 'nosmp' boot option.


> EIP: 0010:[alloc_skb+275/480] Not tainted

I'm somewhat surprized, because I've not found a direct nor indirect call
path from alloc_skb() to filemap_sync_pte_range() in which the error is
reported. I'm clearly missing something here.


> EFLAGS: 00010282
> eax: c22eee80 ebx: ccbdb480 ecx: 000006bc edx: 00000680
> esi: 000001f0 edi: 00000000 ebp: f663bdf0 esp: f663bddc
> ds: 0018 es: 0018 ss: 0018
> Process innfeed (pid: 526, stackpage=f663b000)
> Stack: 000006bc 000001f0 ccbdb080 00000000 f7185800 f663be68 c027b50b
> 00000680
> 000001f0 000005a8 00000000 f663be54 00000000 00000287 d84bec38
> d84bec34
> d84bec54 f663a000 00000000 d5fbd8a0 f663a000 586d4438 0002c774
> 000005a8 Call Trace: [tcp_sendmsg+2619/4512] [inet_sendmsg+65/80]
> [sock_sendmsg+102/176] [sock_readv_writev+116/176] [sock_writev+79/96]
> Code: c7 00 01 00 00 00 8b 83 8c 00 00 00 c7 40 04 00 00 00 00 8b
> Using defaults from ksymoops -t elf32-i386 -a i386
>
>
> >>eax; c22eee80 <_end+1f0d380/38650560>
> >>ebx; ccbdb480 <_end+c7f9980/38650560>
> >>ebp; f663bdf0 <_end+3625a2f0/38650560>
> >>esp; f663bddc <_end+3625a2dc/38650560>
>
> Code; 00000000 Before first symbol
> 00000000 <_EIP>:
> Code; 00000000 Before first symbol
> 0: c7 00 01 00 00 00 movl $0x1,(%eax)
> Code; 00000006 Before first symbol
> 6: 8b 83 8c 00 00 00 mov 0x8c(%ebx),%eax
> Code; 0000000c Before first symbol
> c: c7 40 04 00 00 00 00 movl $0x0,0x4(%eax)
> Code; 00000013 Before first symbol
> 13: 8b 00 mov (%eax),%eax

Regards,
willy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-12-29 06:22    [W:0.080 / U:0.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site