lkml.org 
[lkml]   [2005]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectMore platform driver questions
Hi Dmitry, Russell, Greg,

Now that my new platform driver is mostly done, I would have a few more
questions so as to make sure that I properly understood how things are
supposed to be done. I've searched Documentation and in particular
Documentation/driver-model but couldn't find the answers. Pointers to
relevant documentation would be as much appreciated as direct answers.

1* What are the actual differences between device.platform_data and
device.driver_data? I had never been using .platform_data so far. Are
there rules to determine what data belongs to each?

My own platform device has the following data:
* base I/O address
* chip name
* 2 semaphores
* class device pointer
* cached register values and cache management variables

The base I/O address seemed to belong to .platform_data, as this is the
only way I have to pass the information through the .probe mechanism
(or should I use platform_get_resource instead?) All the rest I have
put in .driver_data. Actually, I even duplicated the base I/O address
there, as it made the rest of the code much more simple.

Alessandro Zummo, who helped me convert my driver at first, had put
almost everything in .platform_data and only the class device pointer
in .driver_data. That worked too. Question is, what is the proper way
of splitting things, if such a way has been defined?

2* Is it OK to tag platform_driver.probe and .remove __devinit and
__devexit, respectively? It seems to make sense conceptually, but as
almost no platform driver seem to actually do that, I'm wondering. It
might even make sense to tag them __init and __exit when the same
module registers and unregisters both the platform_device and the
matching platform_driver. Is it acceptable?

3* Not related to platform drivers in particular, but that's where I
saw it for the first time...

It seems that in most .remove functions, we explicitely set the driver
data pointer to NULL before freeing the associated memory. I am
wondering why. Can someone explain? Given that the device is just being
deleted anyway, I don't quite see the benefit in doing so. But I guess
I am once again missing something obvious.

Last, here comes my code, if it may help you understand my questions.
If anyone could review the platform driver and device management
part of it, and confirm that I'm doing nothing wrong, this would be
welcome too.

Thanks.

--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.15-rc5/drivers/hwmon/f71805f.c 2005-12-11 17:54:29.000000000 +0100
@@ -0,0 +1,906 @@
+/*
+ * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated
+ * hardware monitoring features
+ * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+ *
+ * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
+ * complete hardware monitoring features: voltage, fan and temperature
+ * sensors, and manual and automatic fan speed control.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+static struct platform_device *pdev;
+
+#define DRVNAME "f71805f"
+
+/*
+ * Super-I/O constants and functions
+ */
+
+static int REG __initdata; /* The register to read from/write to */
+static int VAL __initdata; /* The value to read/write */
+
+#define F71805F_LD_HWM 0x04
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_DEVREV 0x22 /* Device revision */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_F71805F_ID 0x0406
+
+static inline int
+superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+static int
+superio_inw(int reg)
+{
+ int val;
+ outb(reg++, REG);
+ val = inb(VAL) << 8;
+ outb(reg, REG);
+ val |= inb(VAL);
+ return val;
+}
+
+static inline void
+superio_select(int ld)
+{
+ outb(SIO_REG_LDSEL, REG);
+ outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+ outb(0x87, REG);
+ outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+ outb(0xaa, REG);
+}
+
+/*
+ * ISA constants
+ */
+
+#define REGION_LENGTH 2
+#define ADDR_REG_OFFSET 0
+#define DATA_REG_OFFSET 1
+
+static struct resource f71805f_resource __initdata = {
+ .flags = IORESOURCE_IO,
+};
+
+/*
+ * Registers
+ */
+
+/* in nr from 0 to 8 (8-bit values) */
+#define F71805F_REG_IN(nr) (0x10 + (nr))
+#define F71805F_REG_IN_HIGH(nr) (0x40 + 2 * (nr))
+#define F71805F_REG_IN_LOW(nr) (0x41 + 2 * (nr))
+/* fan nr from 0 to 2 (12-bit values, two registers) */
+#define F71805F_REG_FAN(nr) (0x20 + 2 * (nr))
+#define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr))
+#define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr))
+/* temp nr from 0 to 2 (8-bit values) */
+#define F71805F_REG_TEMP(nr) (0x1B + (nr))
+#define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr))
+#define F71805F_REG_TEMP_HYST(nr) (0x55 + 2 * (nr))
+#define F71805F_REG_TEMP_MODE 0x01
+
+#define F71805F_REG_START 0x00
+/* status nr from 0 to 2 */
+#define F71805F_REG_STATUS(nr) (0x36 + (nr))
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct f71805f_data {
+ unsigned short addr;
+ const char *name;
+ struct semaphore lock;
+ struct class_device *class_dev;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ unsigned long last_limits; /* In jiffies */
+
+ /* Register values */
+ u8 in[9];
+ u8 in_high[9];
+ u8 in_low[9];
+ u16 fan[3];
+ u16 fan_low[3];
+ u8 fan_enabled; /* Read once at init time */
+ u8 temp[3];
+ u8 temp_high[3];
+ u8 temp_hyst[3];
+ u8 temp_mode;
+ u8 alarms[3];
+};
+
+struct f71805f_pdata {
+ unsigned short addr;
+};
+
+static inline long in_from_reg(u8 reg)
+{
+ return (reg * 8);
+}
+
+/* The 2 least significant bits are not used */
+static inline u8 in_to_reg(long val)
+{
+ if (val <= 0)
+ return 0;
+ if (val >= 2016)
+ return 0xfc;
+ return (((val + 16) / 32) << 2);
+}
+
+/* in0 is downscaled by a factor 2 internally */
+static inline long in0_from_reg(u8 reg)
+{
+ return (reg * 16);
+}
+
+static inline u8 in0_to_reg(long val)
+{
+ if (val <= 0)
+ return 0;
+ if (val >= 4032)
+ return 0xfc;
+ return (((val + 32) / 64) << 2);
+}
+
+/* The 4 most significant bits are not used */
+static inline long fan_from_reg(u16 reg)
+{
+ reg &= 0xfff;
+ if (!reg || reg == 0xfff)
+ return 0;
+ return (1500000 / reg);
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+ /* If the low limit is set below what the chip can measure,
+ store the largest possible 12-bit value in the registers,
+ so that no alarm will ever trigger. */
+ if (rpm < 367)
+ return 0xfff;
+ return (1500000 / rpm);
+}
+
+static inline long temp_from_reg(u8 reg)
+{
+ return (reg * 1000);
+}
+
+static inline u8 temp_to_reg(long val)
+{
+ if (val < 0)
+ val = 0;
+ else if (val > 1000 * 0xff)
+ val = 0xff;
+ return ((val + 500) / 1000);
+}
+
+/*
+ * Device I/O access
+ */
+
+static u8 f71805f_read8(struct f71805f_data *data, u8 reg)
+{
+ u8 val;
+
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ val = inb(data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+
+ return val;
+}
+
+static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val)
+{
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ outb(val, data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+}
+
+/* It is important to read the MSB first, because doing so latches the
+ value of the LSB, so we are sure both bytes belong to the same value. */
+static u16 f71805f_read16(struct f71805f_data *data, u8 reg)
+{
+ u16 val;
+
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ val = inb(data->addr + DATA_REG_OFFSET) << 8;
+ outb(++reg, data->addr + ADDR_REG_OFFSET);
+ val |= inb(data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+
+ return val;
+}
+
+static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val)
+{
+ down(&data->lock);
+ outb(reg, data->addr + ADDR_REG_OFFSET);
+ outb(val >> 8, data->addr + DATA_REG_OFFSET);
+ outb(++reg, data->addr + ADDR_REG_OFFSET);
+ outb(val & 0xff, data->addr + DATA_REG_OFFSET);
+ up(&data->lock);
+}
+
+static struct f71805f_data *f71805f_update_device(struct device *dev)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ int nr;
+
+ down(&data->update_lock);
+
+ /* Limit registers cache is refreshed after 60 seconds */
+ if (time_after(jiffies, data->last_updated + 60 * HZ)
+ || !data->valid) {
+ for (nr = 0; nr < 9; nr++) {
+ data->in_high[nr] = f71805f_read8(data,
+ F71805F_REG_IN_HIGH(nr));
+ data->in_low[nr] = f71805f_read8(data,
+ F71805F_REG_IN_LOW(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ if (data->fan_enabled & (1 << nr))
+ data->fan_low[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_LOW(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ data->temp_high[nr] = f71805f_read8(data,
+ F71805F_REG_TEMP_HIGH(nr));
+ data->temp_hyst[nr] = f71805f_read8(data,
+ F71805F_REG_TEMP_HYST(nr));
+ }
+ data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE);
+
+ data->last_limits = jiffies;
+ }
+
+ /* Measurement registers cache is refreshed after 1 second */
+ if (time_after(jiffies, data->last_updated + HZ)
+ || !data->valid) {
+ for (nr = 0; nr < 9; nr++) {
+ data->in[nr] = f71805f_read8(data,
+ F71805F_REG_IN(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ if (data->fan_enabled & (1 << nr))
+ data->fan[nr] = f71805f_read16(data,
+ F71805F_REG_FAN(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ data->temp[nr] = f71805f_read8(data,
+ F71805F_REG_TEMP(nr));
+ }
+ for (nr = 0; nr < 3; nr++) {
+ data->alarms[nr] = f71805f_read8(data,
+ F71805F_REG_STATUS(nr));
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+/*
+ * Sysfs interface
+ */
+
+static ssize_t show_in0(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in[0]));
+}
+
+static ssize_t show_in0_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[0]));
+}
+
+static ssize_t show_in0_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[0]));
+}
+
+static ssize_t set_in0_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_high[0] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_in0_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_low[0] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", in_from_reg(data->in[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", in_from_reg(data->in_high[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", in_from_reg(data->in_low[nr]));
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_high[nr] = in_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_low[nr] = in_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->fan_low[nr] = fan_to_reg(val);
+ f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp_high[nr]));
+}
+
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", temp_from_reg(data->temp_hyst[nr]));
+}
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ /* 3 is diode, 4 is thermistor */
+ return sprintf(buf, "%u\n", (data->temp_mode & (1 << nr)) ? 3 : 4);
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_high[nr] = temp_to_reg(val);
+ f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_hyst[nr] = temp_to_reg(val);
+ f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_alarms_in(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%d\n", data->alarms[0] |
+ ((data->alarms[1] & 0x01) << 8));
+}
+
+static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%d\n", data->alarms[2] & 0x07);
+}
+
+static ssize_t show_alarms_temp(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->alarms[1] >> 3) & 0x07);
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+
+static struct device_attribute f71805f_dev_attr[] = {
+ __ATTR(in0_input, S_IRUGO, show_in0, NULL),
+ __ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max),
+ __ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min),
+ __ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL),
+ __ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL),
+ __ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL),
+ __ATTR(name, S_IRUGO, show_name, NULL),
+};
+
+static struct sensor_device_attribute f71805f_sensor_attr[] = {
+ SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
+ SENSOR_ATTR(in1_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 1),
+ SENSOR_ATTR(in1_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
+ SENSOR_ATTR(in2_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 2),
+ SENSOR_ATTR(in2_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
+ SENSOR_ATTR(in3_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 3),
+ SENSOR_ATTR(in3_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
+ SENSOR_ATTR(in4_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 4),
+ SENSOR_ATTR(in4_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
+ SENSOR_ATTR(in5_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 5),
+ SENSOR_ATTR(in5_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
+ SENSOR_ATTR(in6_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 6),
+ SENSOR_ATTR(in6_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
+ SENSOR_ATTR(in7_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 7),
+ SENSOR_ATTR(in7_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 7),
+ SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
+ SENSOR_ATTR(in8_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 8),
+ SENSOR_ATTR(in8_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 8),
+
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
+ SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 0),
+ SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+ show_temp_hyst, set_temp_hyst, 0),
+ SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
+ SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 1),
+ SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR,
+ show_temp_hyst, set_temp_hyst, 1),
+ SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
+ SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
+ SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 2),
+ SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR,
+ show_temp_hyst, set_temp_hyst, 2),
+ SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
+};
+
+static struct sensor_device_attribute f71805f_fan_attr[] = {
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
+ SENSOR_ATTR(fan1_min, S_IRUGO | S_IWUSR,
+ show_fan_min, set_fan_min, 0),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
+ SENSOR_ATTR(fan2_min, S_IRUGO | S_IWUSR,
+ show_fan_min, set_fan_min, 1),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
+ SENSOR_ATTR(fan3_min, S_IRUGO | S_IWUSR,
+ show_fan_min, set_fan_min, 2),
+};
+
+/*
+ * Device registration and initialization
+ */
+
+static void __devinit f71805f_init_device(struct f71805f_data *data)
+{
+ u8 reg;
+ int i;
+
+ reg = f71805f_read8(data, F71805F_REG_START);
+ if ((reg & 0x41) != 0x01) {
+ printk(KERN_DEBUG DRVNAME ": Starting monitoring "
+ "operations\n");
+ f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40);
+ }
+
+ /* Fan monitoring can be disabled. If it is, we won't be polling
+ the register values, and won't create the related sysfs files. */
+ for (i = 0; i < 3; i++) {
+ reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
+ if (!(reg & 0x80))
+ data->fan_enabled |= (1 << i);
+ }
+}
+
+static int __devinit f71805f_probe(struct platform_device *pdev)
+{
+ struct f71805f_data *data;
+ struct f71805f_pdata *pdata;
+ int i, err;
+
+ if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Out of memory\n");
+ goto exit;
+ }
+
+ pdata = pdev->dev.platform_data;
+ data->addr = pdata->addr;
+ init_MUTEX(&data->lock);
+ data->name = "f71805f";
+ init_MUTEX(&data->update_lock);
+
+ platform_set_drvdata(pdev, data);
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+ goto exit_free;
+ }
+
+ /* Initialize the F71805F chip */
+ f71805f_init_device(data);
+
+ /* Register sysfs interface files */
+ for (i = 0; i < ARRAY_SIZE(f71805f_dev_attr); i++) {
+ err = device_create_file(&pdev->dev, &f71805f_dev_attr[i]);
+ if (err)
+ goto exit_class;
+ }
+ for (i = 0; i < ARRAY_SIZE(f71805f_sensor_attr); i++) {
+ err = device_create_file(&pdev->dev,
+ &f71805f_sensor_attr[i].dev_attr);
+ if (err)
+ goto exit_class;
+ }
+ for (i = 0; i < ARRAY_SIZE(f71805f_fan_attr); i++) {
+ if (!(data->fan_enabled & (1 << (i / 2))))
+ continue;
+ err = device_create_file(&pdev->dev,
+ &f71805f_fan_attr[i].dev_attr);
+ if (err)
+ goto exit_class;
+ }
+
+ return 0;
+
+exit_class:
+ dev_err(&pdev->dev, "Sysfs interface creation failed\n");
+ hwmon_device_unregister(data->class_dev);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit f71805f_remove(struct platform_device *pdev)
+{
+ struct f71805f_data *data = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ hwmon_device_unregister(data->class_dev);
+ kfree(data);
+
+ return 0;
+}
+
+static struct platform_driver f71805f_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = f71805f_probe,
+ .remove = __devexit_p(f71805f_remove),
+};
+
+static int __init f71805f_device_add(unsigned short address)
+{
+ struct f71805f_pdata *pdata;
+ int err;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ if (!(pdata = kzalloc(sizeof(struct f71805f_pdata), GFP_KERNEL))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Out of memory\n");
+ goto exit_device_put;
+ }
+
+ pdev->dev.platform_data = pdata;
+ pdata->addr = address;
+
+ f71805f_resource.start = address;
+ f71805f_resource.end = address + REGION_LENGTH - 1;
+ f71805f_resource.name = pdev->name;
+ err = platform_device_add_resources(pdev, &f71805f_resource, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int __init f71805f_find(int sioaddr, unsigned short *address)
+{
+ int err = -ENODEV;
+ u16 devid;
+
+ REG = sioaddr;
+ VAL = sioaddr + 1;
+ superio_enter();
+
+ devid = superio_inw(SIO_REG_DEVID);
+ if (devid != SIO_F71805F_ID)
+ goto exit;
+
+ superio_select(F71805F_LD_HWM);
+ if (!(superio_inb(SIO_REG_ENABLE) & 0x01)) {
+ printk(KERN_WARNING DRVNAME ": Device not activated, "
+ "skipping\n");
+ goto exit;
+ }
+
+ *address = superio_inw(SIO_REG_ADDR);
+ if (*address == 0) {
+ printk(KERN_WARNING DRVNAME ": Base address not set, "
+ "skipping\n");
+ goto exit;
+ }
+
+ err = 0;
+ printk(KERN_INFO DRVNAME ": Found F71805F chip at %#x, revision %u\n",
+ *address, superio_inb(SIO_REG_DEVREV));
+
+exit:
+ superio_exit();
+ return err;
+}
+
+static int __init f71805f_init(void)
+{
+ int err;
+ unsigned short address;
+
+ if (f71805f_find(0x2e, &address)
+ && f71805f_find(0x4e, &address))
+ return -ENODEV;
+
+ err = platform_driver_register(&f71805f_driver);
+ if (err)
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ err = f71805f_device_add(address);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&f71805f_driver);
+exit:
+ return err;
+}
+
+static void __exit f71805f_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&f71805f_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("F71805F hardware monitoring driver");
+
+module_init(f71805f_init);
+module_exit(f71805f_exit);
--
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-12-11 22:01    [from the cache]
©2003-2011 Jasper Spaans